Használati útmutató La Crosse WTXG-11

La Crosse óra WTXG-11

Olvassa el alább 📖 a magyar nyelvű használati útmutatót La Crosse WTXG-11 (2 oldal) a óra kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/2
Secondary Modes of Operations: Record( Altimeter Log
Books)
Note: The watch will automatically default back to TIME mode
after 60 seconds if there is no button activity.
From TIME mode, PRESS MODE to enter RECORD(REC)
mode.
PRESS ALTI and/or BARO to toggle between either
MANUAL or AUTOMARIC recordings, then PRESS
COMP.
If a MANUAL RECORDING is being reviewed, PRESS ALTI
and/or BARO to toggle through to the desired recording. The
top line will show the RECORD NUMBER, the middle line will
show the ALTITUDE(at the time of the recording) and the
bottom line will automatically toggle between the time and
date that the data was recorded.
To DELETE a RECORD, PRESS & HOLD COMP for 3
seconds(CLR will blink in the display).
If an AUTOMATIC RECORDINGS is being reviewed, PRESS
ALTI and/or BARO to toggle through the desired recording,
then PRESS COMP. PRESS BARO to toggle through the
FOUR data screens.
To DELETE a RECORD,
PRESS & HOLD COMP
for 3 seconds or until CLR
appears in the display.
NOTE: TO DELETE ALL MANUAL AND/OR AUTOMATIC
RECORDING, PRESS&HOLD COMP WHEN THE WORD
MAN OR AUTO APPEARS IN THE DISPLAY (CLR ALL WILL
APPEAR IN THE DISPLAY).
Explicaon détaillée concernant la
foncon RECORD (enregistrement) :
- A parr de la foncon TIME,
appuyez sur la touche MODE et
séleconnez REC
- Appuyez sur la touche C ou D pour
alterner entre un enregistrement
manuel (MAN) ou automaque
(AUTO), puis appuyez sur la touche E
Pour visualiser un enregistrement
MANUEL, appuyez sur les touches C et/ou
D pour naviguer entre les enregistrements
souhaités. La ligne du dessus ache le
numéro d'enregistrement, la ligne du
milieu ache la donnée enregistrée, et la
ligne du bas ache en alternance l'heure et
la date d'enregistrement.
Pour supprimer un enregistrement,
maintenez la touche E pendant 3 secondes
(CLR va clignoter).
Pour qu'un enregistrement automaque
puisse se faire, la montre doit être laissée
sur la foncon ALTI pendant au moins 30
minutes.
Pour visualiser ensuite un enregistrement
AUTOMATIQUE, appuyez sur les touches C
et/ou D pour naviguer entre les
enregistrements souhaités. Appuyez
ensuite sur la touche E, puis sur la touche D
pour consulter les 4 données
(voir ci-dessous) :
Donnée 1 :
Altitude
Donnée 2 :
Altude
Donnée 3 :
Ascencion
totale
Donnée 4 :
Descente
totale
Pour supprimer un enregistrement,
maintenez la touche E pendant 3 secondes
(CLR va clignoter).
Pour supprimer tous les enregistrements
manuels ou automaques, maintenez la
touche E lorsque MANou AUTO est aché à
l'écran (CLR va apparaître).

Termékspecifikációk

Márka: La Crosse
Kategória: óra
Modell: WTXG-11

Szüksége van segítségre?

Ha segítségre van szüksége La Crosse WTXG-11, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók óra La Crosse

Útmutatók óra

Legújabb útmutatók óra