Használati útmutató Klipsch KI-215-SMA-II

Klipsch mélynyomó KI-215-SMA-II

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Klipsch KI-215-SMA-II (8 oldal) a mélynyomó kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/8
KLIPSCH PERMANENT INSTALLATIONS
KI-102-SMA-II | KI-115-SMA-II | KI-172-SMA-II | KI-215-SMA-II | KI-262-SMA-II | KI-272-SMA-II | KI-362-SMA-II | KI-396-SMA-II
OWNER’S MANUAL
IMPORTANT SAFETY INSTRUCTIONS
1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
6. CLEAN ONLY with dry cloth or lightly damped cloth.
7. DO NOT block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8. DO NOT install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9. ONLY USE attachments/accessories specifically designed
for this application
10. USE only with a cart, stand, tripod, bracket, or table
specifically designed for this application, or sold with the
apparatus. When a cart is used, use caution when moving
the cart/apparatus combination to avoid injury from tip-over.
11. DO NOT expose this apparatus to dripping or splashing and ensure
that no objects filled with liquids, such as vases, are placed on
the apparatus.
12. DO NOT modify or alter in any way.
13. SWITCH OFF amplifier prior to connecting speakers.
14. DO NOT hang or suspend any items from this apparatus.
The exclamation point, within an equilateral triangle, is intended to
alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.
The lightning flash with arrowhead symbol within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure that
may be of sufficient magnitude to constitute a risk of electrical shock
to persons.
WARNING: No naked flame sources – such as candles – should be placed
on the product.
WARNING: Neglect to follow the safety and installation instructions may
cause malfunctions resulting in property damage and personal injury
or death.
WARNING: Installation must be done by qualified personnel to
appropriate standards and/or building codes.
WARNING: Do Not Open! Risk of Electrical Shock. Voltages in this
equipment are hazardous to life. No user-serviceable parts inside. Refer
all servicing to qualified service personnel.
Klipsch recommends that only qualified personnel install its loudspeaker
systems. In addition to the load ratings of speaker enclosure pickup points,
rigging hardware and array configurations, the safety and integrity of any
installation depends on the strength and suitability of the attachment
location. At all times, make sure that the equipment and rigging point
locations are inspected and meet all load requirements with a large margin
of safety. Check all rigging components for defects and corrosion as per
their manufacturer’s recommendations.
Be sure that adequate safety factors are observed, including verifying the
load rating and stress capabilities of attachment hardware, including all
nuts, bolts, brackets and straps. Klipsch additionally recommends backup
retaining straps and/or cinched wirerope for an added measure of safety.
Installations and attachment locations that could present a safety harzard
should be checked and certified as safe by a professional structural engineer.
After assembly of the components on each speaker system, but before
operation, be sure that all bolts and nuts are double-checked for proper seating
and tightness. Due to the weight and size of the components involved, potential
damage could occur if devices were to become unattached.
The KI Series of products are for use
as a “Single Mount Array”, or SMA.
The suspension hardware is intended
for applications requiring suspension
of an individual loudspeaker.
The multiple suspension points are
available to add flexibility to the
mounting options, but NOT intended to
be used as suspension points for other
loudspeakers.

Termékspecifikációk

Márka: Klipsch
Kategória: mélynyomó
Modell: KI-215-SMA-II

Szüksége van segítségre?

Ha segítségre van szüksége Klipsch KI-215-SMA-II, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók mélynyomó Klipsch

Klipsch

Klipsch KI-115-SMA-II Útmutató

1 Január 2025
Klipsch

Klipsch KI-215-SMA-II Útmutató

1 Január 2025
Klipsch

Klipsch RSW-10 Útmutató

31 December 2025
Klipsch

Klipsch Reference RW-5802 II Útmutató

9 December 2024
Klipsch

Klipsch SW-310 Útmutató

18 Szeptember 2024
Klipsch

Klipsch RSW SUB Útmutató

16 Szeptember 2024
Klipsch

Klipsch Icon Series XW Sub Útmutató

8 Szeptember 2024
Klipsch

Klipsch C Series C-310ASWi Útmutató

8 Szeptember 2024
Klipsch

Klipsch SUB 260 Útmutató

2 Szeptember 2024
Klipsch

Klipsch SW-10 Útmutató

31 Augusztus 2024

Útmutatók mélynyomó

Legújabb útmutatók mélynyomó

Phase Technology

Phase Technology IW200-II Útmutató

4 Április 2025
Wet Sounds

Wet Sounds ZERO 10 S4 XZ-W Útmutató

2 Április 2025
SoundTube

SoundTube CM1001D Útmutató

2 Április 2025
JL Audio

JL Audio FS108-W5 Útmutató

31 Március 2025
Phase Technology

Phase Technology PL-12p Útmutató

30 Március 2025
ETON

ETON Graphit 8-2 Útmutató

19 Március 2025
ETON

ETON Graphit 8-4 Útmutató

19 Március 2025
ETON

ETON Graphit 10-4 Útmutató

19 Március 2025
ETON

ETON MW 10 FLAT Útmutató

19 Március 2025
ETON

ETON PW 8 Útmutató

19 Március 2025