Használati útmutató Kicker KMTED

Kicker Grill tányér KMTED

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Kicker KMTED (6 oldal) a Grill tányér kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/6
KNI
TOWER
_
ENCLOSURES
rfKICKER
MODEL:
Authorized KICKER Dealer:
Purchase Date:
Serial Number:
KICKER
MARINE
Tower
Enclosures
Owner's
Manual
KMTES
I
KMTED
The
KICKER
KM
Tower Enclosures are the perfect way to bring your music out into the marine or power sports
environment. Whether upgrading
an
existing system or starting fresh, the
KM
Tower Enclosures are compatible
with any of the
KICKER
KM
or
KICKER
6.5 inch (165mm) speakers (KM6000 will require new mounting holes to
be drilled). The injection-molded ABS enclosures are
UV
treated, splash resistant, and weather resilient. Mount
the
KM
Tower Enclosures
in
your boat or get creative with a pair of them
in
the garage, on your 4x4 or Side-by-
Side's
roll
bars, or
in
any other bar-mounted application.
INSTALLATION
Mounting:
Your
KM
Tower enclosures include plastic adaptor inserts for use with the four most popular tower
tubing diameters : 2-1 /4", 2-3/8",
2-1
/2" and 2-5/8" (without inserts).
If
your tubing diameter
is
different, you may
need to use the KMTAP Accessory pack, which includes adaptors for 1-5/8", 1-3/4", 1-7 /8" and
2"
. For other
tubing diameters, additional shims may be needed.
Study your mounting bar for the best possible mounting locations. Spreading the
KM
Tower Enclosures apart will
provide better stereo performance, and
is
usually preferable. When determining the best locations for mounting,
be careful to look for obstac or les obstructions that could
com~\licate
mounting the
KM
Tower Enclosures.
Please keep
in
mind the routing of your speaker wires as this can affect
where you finally mount your
KM
Tower
En
closures.
Aiming:
The mounting hardware design provides flexibility
in
angular mounting of your
KM
Tower Enclosures.
This
is
accomplished by using the included female -threaded internal mounting plates.
It
is
recommended that
you loosely assemble your
KM
Tower Enclosures and attach them to your mounting bar/tower to determine
proper angular alignment.
steel mounting plate
2
Start by inserting two stainless socket-head
cap
screws through the lower mounting bracket, through the
enclosure mounting holes, and into the threaded mounting plate. Leave these screws loose for the moment.
Attach the enclosure to your mounting bar using the upper mounting bracket and two more stainless socket-
head cap screws. While still loosely assembled, visually align your KM Tower Enclosures to the desired angle.
Using tape, a pencil, or some other means, mark the mounting angle of the mounting bracket bottom
in
relation
to the the KM Tower Enclosure(s). Remove enclosures and then
do
final
tightening of the lower mounting
bracket to the enclosure, aligning
it
with the marks you made. Once your final adjustments are made do not use
excessive force to further aim the enclosures.
If
your aim
is
off, remove the
KM
Tower Enclosures and loosen the
screws between the enclosure and the the lower mounting bracket, then reset angle .
Loosely fill the enclosure with poly-fil, the
white protective layer
in
the packaging.
The KMTED will use one full sheet,
whereas the KMTES will use one sheet for
a woofer and one-half sheet for a horn.
mount speaker to
en<?losure
(recommend
M4
or #8 screws)
remove inner screws
from back of enclosure to
orient back plate.
stainless steel socket-
head cap screws ( 1
I
4"
Allen wrench)
upper mounting bracket
lower mounting bracket
(set desired angle before
completing mounting)
attach wiring to outer
terminals
attach soldered wiring from inner
terminals to speaker terminals, keeping
in
mind the polarity of each.
•
•
K(}~
•
3

Termékspecifikációk

Márka: Kicker
Kategória: Grill tányér
Modell: KMTED

Szüksége van segítségre?

Ha segítségre van szüksége Kicker KMTED, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Grill tányér Kicker

Kicker

Kicker 51KLSR88 Útmutató

10 Január 2025
Kicker

Kicker KMG10 Útmutató

29 Július 2024
Kicker

Kicker 47KLSR65 Útmutató

15 Július 2024
Kicker

Kicker KMTES8 Útmutató

12 Július 2024
Kicker

Kicker KMTED Útmutató

6 Július 2024

Útmutatók Grill tányér

Legújabb útmutatók Grill tányér

Black Decker

Black Decker CG200 Útmutató

31 Március 2025
Braun

Braun MultiGrill 9 Pro CG9160 Útmutató

27 Március 2025
Ambiano

Ambiano PG-3 Útmutató

22 Március 2025
Hamilton Beach

Hamilton Beach 31612MN-MX Útmutató

16 Január 2025
Wet Sounds

Wet Sounds REVO 10 ADP XZ-B Útmutató

14 Január 2025
Bestron

Bestron KRC300BL Útmutató

14 Január 2025
Comelec

Comelec EG7403 Útmutató

14 Január 2025
Comelec

Comelec EG7404 Útmutató

14 Január 2025
Comelec

Comelec EG7401 Útmutató

14 Január 2025
Guzzanti

Guzzanti GZ 342 Útmutató

12 Január 2025