Használati útmutató Kern ODC 851
Kern
mikroszkóp
ODC 851
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Kern ODC 851 (4 oldal) a mikroszkóp kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/4

ODC 85 BA- - -e-2313
KERN & Sohn GmbH
Ziegelei 1
D-72336 Balingen
E-Mail: info@kern sohn.com -
Tel: - - +49 [0]7433 9933-0
Fax: +49 - -[0]7433 9933- 149
Interne sohn.comt: -www.kern
User instructions
Microscope camera
KERN - ODC 85
ODC 851, ODC 852
Version 1.3
09/2023

2
ODC 85 BA- - -e-2313
KERN
ODC- 85
Version 1.3 09 3 /202
User instructions
Microscope camera
Before use
You should device ensure that the is not exposed to direct sunlight, temperatures which
are too high or too low, vibrations, dust or a high level of humidity.
The ideal temperature range is between 0 and 40°C and a relative humidity of 85%
should not be exceeded.
Always make sure that you use an approved power cable. possible damages by Thus,
reason of the development of overheating (fire hazard) or an electric shock can be
prevented.
Do not open the housing and touch the internal component. There is the risk of
damaging them and affecting the functionality of the camera.
In order to carry out cleanings always disconnect the power cable from the camera.
Always keep the sensor clear from dust and do not touch it. Otherwise, there is the risk
of affecting the microscopic image. In case of non use always attach the protective -
covers.
Technical data
Model
KERN
Resolution
Interface
Sensor
Frame rate Colour /
Monochrome
Supported operating
systems
ODC 851 2 MP HDMI,
USB 2.0,
SD
1/2,8“ CMOS - 30 60 fps Colour Win, XP, Vista, 7, 8, 10
ODC 852 5 MP HDMI,
USB 2.0,
SD, WiFi
1/1,8“ CMOS 25 60 – fps Colour Win, XP, Vista, 7, 8, 10
GB

3
ODC 85 BA- - -e-2313
Scope of delivery
-
Microscope camera
-
HDMI cable
-
USB cable (ODC 851)
-
SD card
-
WiFi adapter (ODC 852)
-
Object micrometre for calibration
-
Software CD
Free download:
www.kern DOWNLOADS- > sohn.com > SOFTWARE > Microscope VIS Pro
-
Eyepiece adapter 23,2 (Ø mm)
-
Adjustment rings (Ø 30,0 mm + Ø 30,5 mm) for eyepiece adapter -
USB mouse
-
Power supply
Mounting
1. Remove the black cover at the bottom of the camera.
2. - The thread, where the cover was attached, is a standardised C
mount thread. Thus, there are special C mount adapters needed
for the connection to a microscope.
3. For the mounting to the microscope the C mount adapter is
attached to the connection point of the microscope. After that the
camera must be screwed onto the C mount adapter.
Important:
The choosing mount C of the right adapter depends on the used
microscope model. It has to be an adapter, which is adjusted to
the construction of the microscope and recommended by the
manufacturer as appropriate for the relevant microscope.
4. If necessary, adjust the microscope according to the trinocular
usage (with help of the trino toggle rod / trino toggle wheel).
Termékspecifikációk
Márka: | Kern |
Kategória: | mikroszkóp |
Modell: | ODC 851 |
Szüksége van segítségre?
Ha segítségre van szüksége Kern ODC 851, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók mikroszkóp Kern

9 Április 2025

1 Április 2025

1 Április 2025

1 Április 2025

1 Április 2025

1 Április 2025

1 Április 2025

1 Április 2025

30 Március 2025

30 Március 2025
Útmutatók mikroszkóp
- mikroszkóp National Geographic
- mikroszkóp Hama
- mikroszkóp Nikon
- mikroszkóp Toolcraft
- mikroszkóp Bresser
- mikroszkóp Carson
- mikroszkóp Levenhuk
- mikroszkóp Leica
- mikroszkóp Steinberg
- mikroszkóp Swift
- mikroszkóp Vivitar
- mikroszkóp Reflecta
- mikroszkóp Maginon
- mikroszkóp Celestron
- mikroszkóp Barska
- mikroszkóp Veho
- mikroszkóp Dnt
- mikroszkóp Traveler
- mikroszkóp Ideal Tek
- mikroszkóp Discovery
- mikroszkóp PCE Instruments
- mikroszkóp BeaverLab
- mikroszkóp Dino-Lite
- mikroszkóp National Optical
Legújabb útmutatók mikroszkóp

2 Április 2025

2 Április 2025

30 Március 2025

27 Március 2025

8 Január 2025

16 December 2024

13 December 2024

13 December 2024

16 Október 2024

18 Szeptember 2024