Használati útmutató Kern HO 5K
Kern
Meetapparatuur
HO 5K
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Kern HO 5K (28 oldal) a Meetapparatuur kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/28
Sauter GmbH
Ziegelei 1
D-72336 Balingen
e-mail: info@kern-sohn.com
Phone : +49-[0]7433- 9933-0
Fax: +49-[0]7433- - 9933 149
Internet: www.sauter.eu
Instruction manual ultrasonic hardness
tester
SAUTER HO
Version 2.1
05/20 23
GB
HO- -e-2321 BA
PROFESSIONAL MEASURING
2 - -e-2321 HO BA
GB
SAUTER HO
V. 2.1 05/20 23
Instruction manual ultrasonic hardness tester
Thank you for purchasing the digital ultrasonic hardness tester from SAUTER. We
hope you will be very satised with the high quality of the hardness tester and its
extensive functionality.
For any questions, wishes and suggestions we are at your disposal.
Table of contents:
1 Safety and liability ......................................................................................... 3
1.1 Safety Instructions ................................................................................................................... 3
2 Introduction .................................................................................................... 3
2.1 Description of the device ......................................................................................................... 3
2.2 Specication ............................................................................................................................. 4
2.3 Use ............................................................................................................................................. 5
2.4 Operating conditions ............................................................................................................... 5
2.5 Scope of delivery for the standard version ........................................................................... 5
3 Structure and function .................................................................................. 6
3.1 Basic Structure and Functionality .......................................................................................... 6
3.2 Ultrasonic sensor ..................................................................................................................... 7
4 Technical properties ...................................................................................... 9
4.1 Technical data ........................................................................................................................... 9
5 Safety instructions for handling ................................................................. 10
5.1 Preparation and control ......................................................................................................... 10
5.2 Measurement .......................................................................................................................... 12
6 Special precautions ..................................................................................... 17
7 Handling ....................................................................................................... 18
7.1 Masks and keys ...................................................................................................................... 18
7.2 Test settings ........................................................................................................................... 20
7.3 System settings ..................................................................................................................... 21
7.4 Memory settings ..................................................................................................................... 22
7.5 Print settings ........................................................................................................................... 23
7.6 Calibration ............................................................................................................................... 24
7.7 Permissible deviation and repeatability ............................................................................... 26
7.8 Battery ..................................................................................................................................... 27
7.9 Data transmission .................................................................................................................. 27
8 Maintenance ................................................................................................. 27
9 Warranty ....................................................................................................... 28
10 Storage/Transport ........................................................................................ 28
HO- -e-2321 3 BA
1 Safety and liability
These operating instructions contain important information about safe handling and
maintenance of your new device. Before using the appliance for the rst time, please
read these operating instructions completely and carefully. Please keep the manual
in a safe place for future reference.
1.1 Safety Instructions
Your device is a high-precision instrument; it requires careful handling and must not
be exposed to considerable vibrations. Risk of damage to internal components!
The indenter of the hardness tester is made of diamond and has absolute natural
hardness. Risk of scratching and damage to valuable objects!
After the measurement, lift o the indenter for approx. 0.5s and then perform a new
measurement. Otherwise there will be no resonance between the indenter and the
test specimen in a short time.
After use, store the device in a transport case. Danger of damage!
The main unit and the sensor must not be disassembled. No liability is assumed for
any damage resulting from this.
It is prohibited to use the device in an explosive environment. Fire and explosion
hazard!
Battery: Only the battery supplied by the manufacturer may be used. The battery must
not be disassembled. When inserting the battery, make sure that the polarity is
correct .
Do not throw the battery into fire or heat sources, immerse it in water or expose it to
water! If the battery is deformed, it must not be reused. Switch o the device before
changing the battery. The battery must not be removed when the unit is switched on.
The battery is installed before delivery and does not require any major changes.
Power supply unit: The power supply unit must be stored in a dry place. It must be
protected against short circuits. Danger of damage! Do not touch with wet hands!
Danger of electric shock!
We reserve the right to change the specication of the device as well as the software
without prior notice.
2 Introduction
2.1 Description of the device
Many common measuring methods are currently used for hardness testing.
Such as Brinell, Rockwell, Vickers, Leeb and the like The test load as well as the
rather large penetration depth in the Rockwell and Brinell method lead to
Termékspecifikációk
Márka: | Kern |
Kategória: | Meetapparatuur |
Modell: | HO 5K |
Szüksége van segítségre?
Ha segítségre van szüksége Kern HO 5K, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Meetapparatuur Kern
11 Szeptember 2024
11 Szeptember 2024
11 Szeptember 2024
11 Szeptember 2024
11 Szeptember 2024
11 Szeptember 2024
11 Szeptember 2024
11 Szeptember 2024
11 Szeptember 2024
11 Szeptember 2024
Útmutatók Meetapparatuur
- Meetapparatuur PeakTech
- Meetapparatuur Milwaukee
- Meetapparatuur Pioneer
- Meetapparatuur Bosch
- Meetapparatuur Panasonic
- Meetapparatuur Einhell
- Meetapparatuur Voltcraft
- Meetapparatuur Vimar
- Meetapparatuur Flex
- Meetapparatuur Clean Air Optima
- Meetapparatuur ORNO
- Meetapparatuur Be Cool
- Meetapparatuur SHX
- Meetapparatuur Reely
- Meetapparatuur GW Instek
- Meetapparatuur Owon
- Meetapparatuur Mitsubishi
- Meetapparatuur Gossen Metrawatt
- Meetapparatuur Güde
- Meetapparatuur Eastron
- Meetapparatuur Omnitronic
- Meetapparatuur Klein Tools
- Meetapparatuur Chauvin Arnoux
- Meetapparatuur Dahua Technology
- Meetapparatuur Black & Decker
- Meetapparatuur Beha-Amprobe
- Meetapparatuur Albrecht
- Meetapparatuur Livington
- Meetapparatuur Joy-It
- Meetapparatuur Eberle
- Meetapparatuur Extech
- Meetapparatuur Testo
- Meetapparatuur BaseTech
- Meetapparatuur ProfiCare
- Meetapparatuur Kübler
- Meetapparatuur Grohe
- Meetapparatuur BENNING
- Meetapparatuur Kogan
- Meetapparatuur Alecto
- Meetapparatuur Pico
- Meetapparatuur Yato
- Meetapparatuur Velleman
- Meetapparatuur TFA
- Meetapparatuur Monacor
- Meetapparatuur Shimano
- Meetapparatuur Janitza
- Meetapparatuur Trotec
- Meetapparatuur Fluke
- Meetapparatuur Uni-T
- Meetapparatuur Rossmax
- Meetapparatuur Metrix
- Meetapparatuur Finder
- Meetapparatuur TDE Instruments
- Meetapparatuur Megger
- Meetapparatuur Pyle
- Meetapparatuur Testboy
- Meetapparatuur DeWalt
- Meetapparatuur Laica
- Meetapparatuur IFM
- Meetapparatuur Wachendorff
- Meetapparatuur Greisinger
- Meetapparatuur Sonel
- Meetapparatuur Kyoritsu
- Meetapparatuur Danfoss
- Meetapparatuur Vemer
- Meetapparatuur Emko
- Meetapparatuur Siig
- Meetapparatuur Stabila
- Meetapparatuur GoClever
- Meetapparatuur Soler & Palau
- Meetapparatuur Multimetrix
- Meetapparatuur Carrier
- Meetapparatuur Camille Bauer
- Meetapparatuur H-Tronic
- Meetapparatuur Victron Energy
- Meetapparatuur AREXX
- Meetapparatuur AS Schwabe
- Meetapparatuur Eltako
- Meetapparatuur Weidmüller
- Meetapparatuur Adwa
- Meetapparatuur Ermenrich
- Meetapparatuur Laserliner
- Meetapparatuur Megasat
- Meetapparatuur Hikmicro
- Meetapparatuur Siglent
- Meetapparatuur Kopp
- Meetapparatuur Hazet
- Meetapparatuur Elgato
- Meetapparatuur Ideal
- Meetapparatuur Fysic
- Meetapparatuur Amprobe
- Meetapparatuur Toolland
- Meetapparatuur Meec Tools
- Meetapparatuur ABB
- Meetapparatuur Perel
- Meetapparatuur Flir
- Meetapparatuur Technoline
- Meetapparatuur Goobay
- Meetapparatuur Hager
- Meetapparatuur IHealth
- Meetapparatuur Eizo
- Meetapparatuur Comark
- Meetapparatuur Bruder Mannesmann
- Meetapparatuur RIDGID
- Meetapparatuur Westfalia
- Meetapparatuur Muller
- Meetapparatuur TFA Dostmann
- Meetapparatuur Werma
- Meetapparatuur Peak
- Meetapparatuur X-Rite
- Meetapparatuur Entes
- Meetapparatuur KS Tools
- Meetapparatuur Trumeter
- Meetapparatuur Aeros
- Meetapparatuur Delta Ohm
- Meetapparatuur Aqua Master Tools
- Meetapparatuur MGL Avionics
- Meetapparatuur PCE Instruments
- Meetapparatuur CEM
- Meetapparatuur Hameg
- Meetapparatuur CESYS
- Meetapparatuur Circutor
- Meetapparatuur Duro Pro
- Meetapparatuur Zircon
- Meetapparatuur BJZ
- Meetapparatuur Johnson Level
- Meetapparatuur GMW
- Meetapparatuur Oscium
- Meetapparatuur Sanwa
- Meetapparatuur Condtrol
- Meetapparatuur MSW
- Meetapparatuur Lascar Electronics
- Meetapparatuur HT Instruments
- Meetapparatuur P3 International
- Meetapparatuur Beckmann & Egle
- Meetapparatuur Seek Thermal
- Meetapparatuur INFICON
- Meetapparatuur Motrona
- Meetapparatuur Blebox
- Meetapparatuur Seaward
- Meetapparatuur HOZO Design
- Meetapparatuur Corentium
- Meetapparatuur GQ
- Meetapparatuur Tektronix
- Meetapparatuur Dostmann Electronic
- Meetapparatuur SecuTech
- Meetapparatuur NetPeppers
- Meetapparatuur SensoProtect
- Meetapparatuur Water-i.d.
- Meetapparatuur ZKETECH
- Meetapparatuur LabNation
- Meetapparatuur Electronics International
- Meetapparatuur Cliff
- Meetapparatuur ClimeMET
- Meetapparatuur Fixpoint
- Meetapparatuur AkYtec
- Meetapparatuur Stahlwille
- Meetapparatuur Enda
- Meetapparatuur Noyafa
- Meetapparatuur Stamos
Legújabb útmutatók Meetapparatuur
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024