Használati útmutató Kern HMO
Kern
Meetapparatuur
HMO
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Kern HMO (17 oldal) a Meetapparatuur kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/17
Sauter GmbH
Ziegelei 1
D-72336 Balingen
e-mail: info@kern-sohn.com
Phone : +49-[0]7433- 9933-0
Fax: +49-[0]7433- - 9933 149
Internet: www.sauter.eu
Instruction manual mobile Leeb
hardness tester
SAUTER HMO
Version 2.0
04/2020
GB
HMO- -e- BA 2020
PROFESSIONAL MEASURING
2 HMO- -e- BA 2020
GB
SAUTER HMO
V. 2.0 04/2020
Instruction manual mobile Leeb hardness tester
Thank you for purchasing the mobile digital Leeb impact hardness tester from
SAUTER. We hope that you will be very satised with the high quality of this device
and its extensive functionality. For any questions, wishes and suggestions we are at
your disposal.
Table of contents:
1 Before commissioning .................................................................................. 3
2 Introduction .................................................................................................... 3
2.1 Measuring principle .................................................................................................................. 3
2.2 Structure .................................................................................................................................... 4
2.3 Technical data ........................................................................................................................... 5
2.4 Area of application ................................................................................................................... 5
3 Test procedure ............................................................................................... 6
3.1 Preparation of the device 6........................................................................................................
3.2 Preparation of the sample ....................................................................................................... 6
3.3 Test execution .......................................................................................................................... 8
3.4 Browsing ................................................................................................................................... 8
3.5 Print 9............................................................................................................................................
4 Setup ............................................................................................................... 9
4.1 Settings in the main mask ....................................................................................................... 9
4.2 Menu settings ......................................................................................................................... 10
5 Care and maintenance ................................................................................. 14
5.1 Periodic maintenance ............................................................................................................ 14
5.2 Store ......................................................................................................................................... 14
5.3 Calibration ............................................................................................................................... 15
6 Annex ............................................................................................................ 16
6.1 Conversion area ..................................................................................................................... 17
6.2 Scope of delivery .................................................................................................................... 17
HMO- -e- 3 BA 2020
1 Before commissioning
Before putting the device into operation, check the delivery for any transport damage
to the packaging, the plastic case and the device itself. Should this be the case,
SAUTER must be contacted immediately.
2 Introduction
2.1 Measuring principle
The measuring principle for the measurements carried out with this dynamic impact
hardness tester is physically quite uncomplicated. An impact body with a hard metal
tip is hurled against the surface of the test object by the spring force. When the impact
body hits the surface, it can be damaged, which ultimately leads to a loss of kinetic
energy.
This energy loss is calculated on the basis of velocity measurements, at a certain point
in time when the impactor is at a certain distance from the surface, both in the rebound
and impact phases.
The xed magnet in the impact body generates an induction voltage in the simple wire
coil of the impact tester. The voltage of the signal is proportional to the speed of the
impact body. The signal is processed by the electronics so that the hardness value can
be read on the display and then stored.
English
German
Impact phase
Impact phase
Rebound phase
Rebound phase
Time
Time
Termékspecifikációk
Márka: | Kern |
Kategória: | Meetapparatuur |
Modell: | HMO |
Szüksége van segítségre?
Ha segítségre van szüksége Kern HMO, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Meetapparatuur Kern
11 Szeptember 2024
11 Szeptember 2024
11 Szeptember 2024
11 Szeptember 2024
11 Szeptember 2024
11 Szeptember 2024
11 Szeptember 2024
11 Szeptember 2024
11 Szeptember 2024
11 Szeptember 2024
Útmutatók Meetapparatuur
- Meetapparatuur PeakTech
- Meetapparatuur Milwaukee
- Meetapparatuur Pioneer
- Meetapparatuur Bosch
- Meetapparatuur Panasonic
- Meetapparatuur Einhell
- Meetapparatuur Voltcraft
- Meetapparatuur Vimar
- Meetapparatuur Flex
- Meetapparatuur Clean Air Optima
- Meetapparatuur ORNO
- Meetapparatuur Be Cool
- Meetapparatuur SHX
- Meetapparatuur Reely
- Meetapparatuur GW Instek
- Meetapparatuur Owon
- Meetapparatuur Mitsubishi
- Meetapparatuur Gossen Metrawatt
- Meetapparatuur Güde
- Meetapparatuur Eastron
- Meetapparatuur Omnitronic
- Meetapparatuur Klein Tools
- Meetapparatuur Chauvin Arnoux
- Meetapparatuur Dahua Technology
- Meetapparatuur Black & Decker
- Meetapparatuur Beha-Amprobe
- Meetapparatuur Albrecht
- Meetapparatuur Livington
- Meetapparatuur Joy-It
- Meetapparatuur Eberle
- Meetapparatuur Extech
- Meetapparatuur Testo
- Meetapparatuur BaseTech
- Meetapparatuur ProfiCare
- Meetapparatuur Kübler
- Meetapparatuur Grohe
- Meetapparatuur BENNING
- Meetapparatuur Kogan
- Meetapparatuur Alecto
- Meetapparatuur Pico
- Meetapparatuur Yato
- Meetapparatuur Velleman
- Meetapparatuur TFA
- Meetapparatuur Monacor
- Meetapparatuur Shimano
- Meetapparatuur Janitza
- Meetapparatuur Trotec
- Meetapparatuur Fluke
- Meetapparatuur Uni-T
- Meetapparatuur Rossmax
- Meetapparatuur Metrix
- Meetapparatuur Finder
- Meetapparatuur TDE Instruments
- Meetapparatuur Megger
- Meetapparatuur Pyle
- Meetapparatuur Testboy
- Meetapparatuur DeWalt
- Meetapparatuur Laica
- Meetapparatuur IFM
- Meetapparatuur Wachendorff
- Meetapparatuur Greisinger
- Meetapparatuur Sonel
- Meetapparatuur Kyoritsu
- Meetapparatuur Danfoss
- Meetapparatuur Vemer
- Meetapparatuur Emko
- Meetapparatuur Siig
- Meetapparatuur Stabila
- Meetapparatuur GoClever
- Meetapparatuur Soler & Palau
- Meetapparatuur Multimetrix
- Meetapparatuur Carrier
- Meetapparatuur Camille Bauer
- Meetapparatuur H-Tronic
- Meetapparatuur Victron Energy
- Meetapparatuur AREXX
- Meetapparatuur AS Schwabe
- Meetapparatuur Eltako
- Meetapparatuur Weidmüller
- Meetapparatuur Adwa
- Meetapparatuur Ermenrich
- Meetapparatuur Laserliner
- Meetapparatuur Megasat
- Meetapparatuur Hikmicro
- Meetapparatuur Siglent
- Meetapparatuur Kopp
- Meetapparatuur Hazet
- Meetapparatuur Elgato
- Meetapparatuur Ideal
- Meetapparatuur Fysic
- Meetapparatuur Amprobe
- Meetapparatuur Toolland
- Meetapparatuur Meec Tools
- Meetapparatuur ABB
- Meetapparatuur Perel
- Meetapparatuur Flir
- Meetapparatuur Technoline
- Meetapparatuur Goobay
- Meetapparatuur Hager
- Meetapparatuur IHealth
- Meetapparatuur Eizo
- Meetapparatuur Comark
- Meetapparatuur Bruder Mannesmann
- Meetapparatuur RIDGID
- Meetapparatuur Westfalia
- Meetapparatuur Muller
- Meetapparatuur TFA Dostmann
- Meetapparatuur Werma
- Meetapparatuur Peak
- Meetapparatuur X-Rite
- Meetapparatuur Entes
- Meetapparatuur KS Tools
- Meetapparatuur Trumeter
- Meetapparatuur Aeros
- Meetapparatuur Delta Ohm
- Meetapparatuur Aqua Master Tools
- Meetapparatuur MGL Avionics
- Meetapparatuur PCE Instruments
- Meetapparatuur CEM
- Meetapparatuur Hameg
- Meetapparatuur CESYS
- Meetapparatuur Circutor
- Meetapparatuur Duro Pro
- Meetapparatuur Zircon
- Meetapparatuur BJZ
- Meetapparatuur Johnson Level
- Meetapparatuur GMW
- Meetapparatuur Oscium
- Meetapparatuur Sanwa
- Meetapparatuur Condtrol
- Meetapparatuur MSW
- Meetapparatuur Lascar Electronics
- Meetapparatuur HT Instruments
- Meetapparatuur P3 International
- Meetapparatuur Beckmann & Egle
- Meetapparatuur Seek Thermal
- Meetapparatuur INFICON
- Meetapparatuur Motrona
- Meetapparatuur Blebox
- Meetapparatuur Seaward
- Meetapparatuur HOZO Design
- Meetapparatuur Corentium
- Meetapparatuur GQ
- Meetapparatuur Tektronix
- Meetapparatuur Dostmann Electronic
- Meetapparatuur SecuTech
- Meetapparatuur NetPeppers
- Meetapparatuur SensoProtect
- Meetapparatuur Water-i.d.
- Meetapparatuur ZKETECH
- Meetapparatuur LabNation
- Meetapparatuur Electronics International
- Meetapparatuur Cliff
- Meetapparatuur ClimeMET
- Meetapparatuur Fixpoint
- Meetapparatuur AkYtec
- Meetapparatuur Stahlwille
- Meetapparatuur Enda
- Meetapparatuur Noyafa
- Meetapparatuur Stamos
Legújabb útmutatók Meetapparatuur
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024