Használati útmutató Kanto FMX2

Kanto Lapos panel támogatás FMX2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Kanto FMX2 (8 oldal) a Lapos panel támogatás kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/8
User Manual
FMX2 TV Mount
Supporting your digital lifestyle™
FULL MOTION FLAT PANEL TV MOUNT
English
3.2 –20”
(8.2–51 cm)
±80°
+14°/-8°
130 lbs
(59 kg)
75 x 75
to
800 x 450
VESA
COMPLIANT
Introduction
Table of Contents
Table of Contents / Introduction . . . . . . . . . . . . . 2
Supplied Parts & Hardware . . . . . . . . . . . . . . . . . . 3
Setup - Step 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Setup - Step 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Setup - Steps 3 to 4 . . . . . . . . . . . . . . . . . . . . . . . 6
Setup - Steps 5 to 6 . . . . . . . . . . . . . . . . . . . . . . . 7
Other Kanto Products . . . . . . . . . . . . . . . . . . . . . . 8
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2
Thank you for choosing a Kanto full motion TV wall mount. The FMX2 is designed to mount fl at panel televisions weighing up
to 130 lbs (59 kg), extend up to 20” (51 cm) from your wall, allows you to swivel left and right 80°, and tilt your TV +14°/-8°.
You
can also adjust the horizontal level ±5°.
Read these instructions fully before installation of this mount. If you do not understand these directions, or have any
doubts about the safety of the installation, please consult a qualifi ed installation contractor to install this mount. Make
sure there are no defective or missing parts. Do not use defective parts. If there is hardware missing, or if you are
uncertain whether the part is defective call Kanto directly at 1-888-848-2643 or email support@kantoliving.com. This
product should not be mounted on steel stud walls or cinder block walls. Consult a qualifi ed installation contractor if
you are unsure about the type of wall you may have. Kanto cannot be liable for property damage or injury caused by
incorrect mounting, incorrect assembly, lifting or incorrect use of this product.
CAUTION
The wall you plan to affi x the Kanto mount to must be able to support more than 5 times the weight of the
television and the wall mount combined. Do not use this product for any purpose other than to mount a fl at panel
TV on a vertical surface as outlined in this manual. Improper installation may cause damage to your TV or serious
injury. This product should not be mounted to steel stud walls, cinder block or old concrete walls. Consult a qualifi ed
installation contractor if you are unsure about the type of wall you may have.
CAUTION
The maximum loading weight is 130 lbs (59 kg). This wall mount is intended for use up to the maximum weight
restrictions indicated. Use with products heavier than the maximum weights indicated may result in instability causing
possible injury.
Visit our Website for the most recent version of this manual.
See installation video online at:
Regarder la video d’installation en ligne à:
Vea el vídeo de instalación online en:
www.kantomounts.com
Supporting your digital lifestyle™
3
Supplied Parts and Hardware
Wall Plate
M: Lag Bolt
P: TV BracketN: Concrete Anchor
L: M8 Washer /
Lag Bolt Washer
x10 x6
K: M5/M6 Washer
x4
x6 x2
D: M6 x 35mm
Bolt
G: M8 x 50mm
Bolt
x4
x4
A: M5 x 12mm
Bolt
C: M6 x 12mm
Bolt
B: M5 x 30mm
Bolt
E: M8 x 20mm
Bolt
x4 x4 x4 x4
x4 x8
H: M5/M6
14mm Plastic Spacer
I: M5/M6/M8
10mm Plastic Spacer
O: Allen Key
x4
J: M5/M6/M8
5mm Plastic Spacer
Required Tools
Socket
set
Phillips
Screwdriver
Hammer (for
concrete
installs)
Crescent
Wrench
Stud
Finder
Level Drill
3/8”
Masonry
Bit
7/32”
Wood
Bit
F: M8 x 35mm
Bolt
x4

Termékspecifikációk

Márka: Kanto
Kategória: Lapos panel támogatás
Modell: FMX2

Szüksége van segítségre?

Ha segítségre van szüksége Kanto FMX2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Lapos panel támogatás Kanto

Kanto

Kanto FMX2 Útmutató

9 December 2024

Útmutatók Lapos panel támogatás

Legújabb útmutatók Lapos panel támogatás

Proaim

Proaim CT-SDCF-PRO Útmutató

7 December 2024
Proaim

Proaim CT-SDCF-OG Útmutató

7 December 2024
Atdec

Atdec AWM-W-S Útmutató

7 December 2024
Atdec

Atdec AD-WF-8060 Útmutató

7 December 2024
Atdec

Atdec AD-WT-8060 Útmutató

7 December 2024
Proaim

Proaim CT-SDCF-CV4 Útmutató

7 December 2024
NEC

NEC PDVWXUN 55 P Útmutató

15 Október 2024
Insignia

Insignia NS-STV3N1705 Útmutató

15 Október 2024
Abus

Abus BW8060 Útmutató

4 Október 2024
One For All

One For All DM 4110 Útmutató

2 Október 2024