Használati útmutató Kaden KEX420

Kaden Fűtő KEX420

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Kaden KEX420 (24 oldal) a Fűtő kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/24
Ducted Gas Heaters
Safety Information
Installation
Commissioning
Models
INSTALLER’S
MANUAL
Universal:
KUN3 | KUN4 | KUN5
External
KEX3 | KEX4
3
5. Fan Speed KUN3, KEX3 & KEX4 24
5.1 Fan Speed Setting For KUN3, KEX3 & KEX4 Models .................................................................................. 24
5.1.1 To Adjust The Fan Speed .................................................................................................................. 24
6. Ducting Information 25
6.1 Minimum Recommended Return Air Grille Selection Chart .......................................................................... 25
7. Outlet Guide 26
7.1 Outlet Register Chart ..................................................................................................................................... 27
8. Wall Control Installation 28
8.1 Networker Installation KUN4 & KUN5 ............................................................................................................ 29
8.1.1 Wiring the Networker to a KUN4 & KUN5 Heater ............................................................................. 29
8.2 Manual Wall Control Installation .................................................................................................................... 30
8.2.1 Wiring the Manual Wall Control to a KUN3 Heater ........................................................................... 30
8.2.2 Wiring the Manual Wall Control to a KEX4 & KEX3 Heaters ............................................................ 30
9. Commissioning KUN4 & KUN5 32
9.1 Heater Control Settings .................................................................................................................................. 32
9.2 Installer Parameters Via Networker ............................................................................................................... 33
9.2.1 Networker Installer Parameter KUN4 & KUN5 .................................................................................. 33
9.2.2 Adjust Networker Parameters ............................................................................................................ 34
9.3 KUN4 & KUN5 Commissioning Instructions .................................................................................................. 34
9.3.1 Initial Ignition and Gas Inlet Pressure Check .................................................................................... 34
9.3.2 Heater Fan Speed and Temperature Settings ................................................................................... 35
9.3.3 Final Checks ...................................................................................................................................... 36
9.4 Fault Code Identification on Heater PCB ....................................................................................................... 36
9.4.1 NG-3 L.E.D Identification ................................................................................................................... 36
9.4.2 Error codes associated with installation ............................................................................................ 37
10. Commissioning KUN3, KEX3 & KEX4 38
10.1 Commissioning Instructions ........................................................................................................................... 38
10.1.1 Start & Check Supply Pressure ......................................................................................................... 38
10.1.2 Start & Check Burner Pressure ......................................................................................................... 38
10.1.3 Setting the Fan Speed ...................................................................................................................... 39
10.1.4 Final Checks ...................................................................................................................................... 39
11. Technical Specifications 40
12. Technical Support 41
4
Kaden Installer's Manual
Ducted Gas Heaters
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
Failure to carefully read and follow all instructions in this manual can result in equipment malfunction,
property damage, personal injury and/or death.
WARNINGS: WHEN IGNORED, CAN RESULT IN SERIOUS INJURY OR DEATH.
CAUTIONS: WHEN IGNORED, CAN RESULT IN MINOR INJURY OR PRODUCT DAMAGE.
SHALL / MUST/
IMPORTANT: INDICATES A MANDATORY REQUIREMENT OF THIS MANUAL.
SHOULD:
INDICATES A RECOMMENDED REQUIREMENT OF THIS MANUAL.
Any deviations from these instructions may void the warranty. As a result, the customer
and/or installer may be charged a fee for product non-warranty related call outs. Also,
note that failure to comply with these instructions may preclude servicing of the unit.
DISCLAIMER:
This document is a guide only. Laws, regulations and industry standards can vary
between States and Territories. Accordingly, this guide read in conjunction MUST BE
with, and subject to, all laws, regulations and industry standards applicable in the State
or Territory in which the products are installed. You ensure that the installation MUST
of the products will comply with those laws, regulations and standards, and that the
products recommended to customers are t for the purpose for which they are intended.
WARNING
REGULATORY / INSTALLATION / SAFETY
This appliance installed in accordance with:SHALL BE
Manufacturer’s Installation Instructions and the Kaden Sizing Guide.
Current AS/NZS 5601 (Gas Installation Standard), AS/NZS 5141 (Residential Climate Control
Systems), AS/NZS 3000 (Electrical Codes) and Local Gas / Electrical authority regulations.
Current AS 4254 Ductwork for air-handling systems in buildings, EPA guidelines and HB276-2004
“A Guide to Good Practice”
Local Regulations and Municipal Building Codes (BCA) including local OH&S requirements.
ALWAYS comply with the following precautions to avoid dangerous situations and to ensure optimum
performance.
This appliance installed, maintained and removed by an Authorised Person.MUST BE
DO NOT place any articles on or against this appliance
DO NOT use or store ammable materials near this appliance
DO NOT spray aerosols in the vicinity of this appliance while it is in operation
DO NOT modify this appliance
This appliance is intended for use by persons (including children) with reduced physical, NOT
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety
Children should be supervised to ensure that they play with the appliance.DO NOT
NOTE
The Kaden Networker controller is used as a Wired Wall Thermostat and is also the interface to
set Installer Parameters and obtain diagnostic information on the Kaden KU4 and KU5 Ducted
Gas Heaters. A spare Networker should be kept on hand for such purposes.
IMPORTANT
WARNINGS AND IMPORTANT INFORMATION

Termékspecifikációk

Márka: Kaden
Kategória: Fűtő
Modell: KEX420

Szüksége van segítségre?

Ha segítségre van szüksége Kaden KEX420, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Fűtő Kaden

Kaden

Kaden KEX320 Útmutató

15 Augusztus 2024
Kaden

Kaden KEX420 Útmutató

15 Augusztus 2024
Kaden

Kaden KEX428 Útmutató

15 Augusztus 2024
Kaden

Kaden KEX315 Útmutató

15 Augusztus 2024
Kaden

Kaden KEX415 Útmutató

15 Augusztus 2024
Kaden

Kaden KEX328 Útmutató

15 Augusztus 2024

Útmutatók Fűtő

Legújabb útmutatók Fűtő