Használati útmutató Jonsered CS 2255

Jonsered Fűrészgép CS 2255

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Jonsered CS 2255 (44 oldal) a Fűrészgép kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/44
English
CS 2255
Operator
′′′′
s manual
Please read the oper
ator’s manual carefully and make sure you understand the instructions before using the machine.
KEY
T
O SYMBOLS
2
–
English
Symbols on the mac
hine:
W
ARNING! Chain saws can be
dangerous! Careless or incorrect use
can result in serious or fatal injury to the
operator or others.
Please read the operator’s manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective goggles or a visor
This product is in accordance with
applicable EC directives.
Noise emission to the environment
according to the European
Community’s Directive. The machine’s
emission is specified in chapter
Technical data and on label.
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
Symbols in the operator’
s
manual:
Switch off the engine b
y moving the
stop switch to the STOP position before
carrying out any checks or
maintenance.
Always wear approved protective
gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be
worn.
Refuelling.
Filling with oil and adjusting oil flow.
The chain brake must be engaged
when the chain saw is started.
WARNING! Kickback may occur when
the nose or tip of the guide bar touches
an object, and cause a lightning fast
reverse reaction, kicking the guide bar
up and towards the operator. May
cause serious personal injury.
CONTENTS
English
–
3
Contents
KEY
TO SYMBOLS
Symbols on the machine:
..................................... 2
Symbols in the operator’s manual: ....................... 2
CONTENTS
Contents
............................................................... 3
INTR
ODUCTION
Dear Customer
, .................................................... 4
WHA
T IS WHAT?
What is what on the chain sa
w? ........................... 5
GENERAL SAFETY PRECA
UTIONS
Bef
ore using a new chain saw .............................. 6
Important .............................................................. 6
Always use common sense .................................. 7
Personal protective equipment ............................. 7
Machine
′
s safety equipment ................................. 7
Cutting equipment ................................................ 10
ASSEMBL
Y
Fitting the bar and chain
....................................... 16
FUEL HANDLING
Fuel
...................................................................... 18
Fuelling ................................................................. 19
Fuel safety ............................................................ 19
ST
ARTING AND STOPPING
Star
ting and stopping ........................................... 20
W
ORKING TECHNIQUES
Bef
ore use: ........................................................... 22
General working instructions ................................ 22
How to avoid kickback .......................................... 29
MAINTENANCE
Gener
al ................................................................. 30
Carburettor adjustment ......................................... 30
Checking, maintaining and servicing chain saw
safety equipment .................................................. 31
Muffler .................................................................. 33
Starter .................................................................. 34
Air filter ................................................................. 35
Spark plug ............................................................ 36
Lubricating the bar tip sprocket ............................ 36
Needle bearing lubrication ................................... 36
Adjustment of the oil pump ................................... 36
Cooling system ..................................................... 37
”Turbo Air Cleaning” centrifugal cleaning .............. 37
Winter use ............................................................ 37
Maintenance schedule ......................................... 38
TECHNICAL D
ATA
T
echnical data ...................................................... 39
Bar and chain combinations ................................. 40
Saw chain filing and file gauges ........................... 40
EC-declaration of conformity ................................ 41

Termékspecifikációk

Márka: Jonsered
Kategória: Fűrészgép
Modell: CS 2255

Szüksége van segítségre?

Ha segítségre van szüksége Jonsered CS 2255, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Fűrészgép Jonsered

Jonsered

Jonsered CS 2245 Útmutató

24 Augusztus 2024
Jonsered

Jonsered CS16i Útmutató

24 Augusztus 2024
Jonsered

Jonsered CS2250 Útmutató

24 Augusztus 2024
Jonsered

Jonsered CS 2255 Útmutató

24 Augusztus 2024

Útmutatók Fűrészgép

Legújabb útmutatók Fűrészgép

Bavaria By Einhell

Bavaria By Einhell BHS 66 Útmutató

3 Április 2025
Bavaria By Einhell

Bavaria By Einhell BPS 600 E Útmutató

3 Április 2025
Makita

Makita DCS4610 Útmutató

2 Április 2025
Makita

Makita DPC6430 Útmutató

1 Április 2025
Makita

Makita DCS431 Útmutató

1 Április 2025
Makita

Makita DCS430 Útmutató

1 Április 2025
Makita

Makita EK6101 Útmutató

1 Április 2025
Makita

Makita DCS6401 Útmutató

1 Április 2025
Kraftronic

Kraftronic KT-ST 550 Útmutató

30 Március 2025
Kraftronic

Kraftronic KT-US 650 Útmutató

30 Március 2025