Használati útmutató Jonsered CS 2245
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Jonsered CS 2245 (44 oldal) a Fűrészgép kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/44
English
CS 2245
CS 2245S
CS 2250S
Operator
’s manual
Please read the oper
ator’s manual carefully and make sure you understand the instructions before using the machine.
KEY
T
O SYMBOLS
2
–
English
Symbols on the mac
hine:
W
ARNING! Chain saws can be
dangerous! Careless or incorrect use
can result in serious or fatal injury to the
operator or others.
Please read the operator’s manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective goggles or a visor
This product is in accordance with
applicable EC directives.
Noise emission to the environment
according to the European
Community’s Directive. The machine’s
emission is specified in chapter
Technical data and on label.
Both of the operator
′
s hands must be
used to operate the chain saw.
Never operate a chain saw holding it with
one hand only.
Contact of the guide bar tip with any
object must be avoided.
WARNING! Kickback may occur when
the nose or tip of the guide bar touches
an object, and cause a lightning fast
reverse reaction, kicking the guide bar
up and towards the operator. May cause
serious personal injury.
Other symbols/decals on the mac
hine refer to special
certification requirements for certain markets.
Symbols in the operator’
s
manual:
Switch off the engine bef
ore
carrying out any checks or
maintenance. CAUTION! The
start/stop switch automatically
returns to run position. In order
to prevent unintentional
starting, the spark plug cap
must be removed from the spark plug when assembling,
checking and/or performing maintenance.
Always wear approved protective
gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must
be worn.
Refuelling.
Filling with oil and adjusting oil
flow.
The chain brake must be engaged
when the chain saw is started.
WARNING! Kickback may occur
when the nose or tip of the guide bar
touches an object, and cause a
lightning fast reverse reaction, kicking
the guide bar up and towards the
operator. May cause serious personal
injury.
CONTENTS
English
–
3
Contents
KEY
TO SYMBOLS
Symbols on the machine:
..................................... 2
Symbols in the operator’s manual: ....................... 2
CONTENTS
Contents
............................................................... 3
INTR
ODUCTION
Dear Customer
, .................................................... 4
WHA
T IS WHAT?
What is what on the chain sa
w? ........................... 5
GENERAL SAFETY PRECA
UTIONS
Bef
ore using a new chain saw .............................. 6
Important .............................................................. 6
Always use common sense .................................. 7
Personal protective equipment ............................. 7
Machine
′
s safety equipment ................................. 7
Cutting equipment ................................................ 10
ASSEMBL
Y
Fitting the bar and chain
....................................... 17
FUEL HANDLING
Fuel
...................................................................... 19
Fuelling ................................................................. 20
Fuel safety ............................................................ 20
ST
ARTING AND STOPPING
Star
ting and stopping ........................................... 21
W
ORKING TECHNIQUES
Bef
ore use: ........................................................... 23
General working instructions ................................ 23
How to avoid kickback .......................................... 29
MAINTENANCE
Gener
al ................................................................. 31
Carburettor adjustment ......................................... 31
Checking, maintaining and servicing chain saw
safety equipment .................................................. 31
Muffler .................................................................. 33
Starter .................................................................. 34
Air filter ................................................................. 35
Spark plug ............................................................ 36
Lubricating the bar tip sprocket ............................ 36
Needle bearing lubrication ................................... 36
Cooling system ..................................................... 36
”Turbo Air Cleaning” centrifugal cleaning .............. 37
Winter use ............................................................ 37
Maintenance schedule ......................................... 38
TECHNICAL D
ATA
T
echnical data ...................................................... 39
Bar and chain combinations ................................. 40
Saw chain filing and file gauges ........................... 40
EC-declaration of conformity ................................ 41
Termékspecifikációk
Márka: | Jonsered |
Kategória: | Fűrészgép |
Modell: | CS 2245 |
Szüksége van segítségre?
Ha segítségre van szüksége Jonsered CS 2245, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Fűrészgép Jonsered
24 Augusztus 2024
24 Augusztus 2024
Útmutatók Fűrészgép
- Fűrészgép Milwaukee
- Fűrészgép Husqvarna
- Fűrészgép Dolmar
- Fűrészgép Parkside
- Fűrészgép Worx
- Fűrészgép Bosch
- Fűrészgép AEG
- Fűrészgép Einhell
- Fűrészgép Florabest
- Fűrészgép Stihl
- Fűrészgép Yard Force
- Fűrészgép Ozito
- Fűrészgép Makita
- Fűrészgép Hyundai
- Fűrészgép Fuxtec
- Fűrészgép Flex
- Fűrészgép Rona
- Fűrészgép AL-KO
- Fűrészgép Scheppach
- Fűrészgép Ergotools Pattfield
- Fűrészgép Genesis
- Fűrészgép Güde
- Fűrészgép Hitachi
- Fűrészgép Remington
- Fűrészgép Toolcraft
- Fűrészgép Proviel
- Fűrészgép Cobra
- Fűrészgép Hilti
- Fűrészgép Black & Decker
- Fűrészgép Gardena
- Fűrészgép Global
- Fűrészgép Fieldmann
- Fűrészgép PowerPlus
- Fűrészgép Metabo
- Fűrészgép Bavaria
- Fűrészgép RYOBI
- Fűrészgép Stiga
- Fűrészgép Hammer
- Fűrészgép Solo
- Fűrészgép Proxxon
- Fűrészgép HiKOKI
- Fűrészgép Texas
- Fűrészgép Grizzly
- Fűrészgép Festool
- Fűrészgép McCulloch
- Fűrészgép Greenworks
- Fűrészgép Yato
- Fűrészgép Gardenline
- Fűrészgép Budget
- Fűrészgép Baumr-AG
- Fűrészgép Shindaiwa
- Fűrészgép McKenzie
- Fűrészgép Trotec
- Fűrészgép Zipper
- Fűrészgép Bebe Confort
- Fűrészgép Bavaria By Einhell
- Fűrészgép Herkules
- Fűrészgép Porter-Cable
- Fűrészgép DeWalt
- Fűrészgép Stanley
- Fűrészgép Silverline
- Fűrészgép Vonroc
- Fűrészgép Cotech
- Fűrészgép TAURUS Titanium
- Fűrészgép Pattfield
- Fűrészgép Luxor
- Fűrészgép Holzmann
- Fűrészgép Fein
- Fűrészgép Challenge Xtreme
- Fűrészgép ATIKA
- Fűrészgép Spear & Jackson
- Fűrészgép Cocraft
- Fűrészgép Craftsman
- Fűrészgép Ferm
- Fűrészgép Draper
- Fűrészgép Tryton
- Fűrészgép Skil
- Fűrészgép Meec Tools
- Fűrészgép Sun Joe
- Fűrészgép Dremel
- Fűrészgép Ferrex
- Fűrészgép Maktec
- Fűrészgép Bort
- Fűrészgép Power Craft
- Fűrészgép Troy-Bilt
- Fűrészgép Topcraft
- Fűrészgép Martha Stewart
- Fűrészgép Gamma
- Fűrészgép Sterwins
- Fűrészgép Kress
- Fűrészgép Duro
- Fűrészgép Prime3
- Fűrészgép IKRA
- Fűrészgép Truper
- Fűrészgép Masport
- Fűrészgép Echo
- Fűrészgép Bruder Mannesmann
- Fűrészgép Meister Craft
- Fűrészgép RIDGID
- Fűrészgép Batavia
- Fűrészgép Elu
- Fűrészgép Plantiflor
- Fűrészgép Lux Tools
- Fűrészgép Kompernass
- Fűrészgép Triton
- Fűrészgép Wolfcraft
- Fűrészgép Kreg
- Fűrészgép Vulcan
- Fűrészgép Anova
- Fűrészgép Ergofix
- Fűrészgép Pro-Cut
- Fűrészgép Narex
- Fűrészgép Rikon
- Fűrészgép Duro Pro
- Fűrészgép Toolson
- Fűrészgép Toledo
- Fűrészgép Erbauer
- Fűrészgép Gude Pro
- Fűrészgép MSW
- Fűrészgép Royal Catering
- Fűrészgép Robust
- Fűrészgép Ultranatura
- Fűrészgép FIXIT
- Fűrészgép Einhell Bavaria
- Fűrészgép MyTool
- Fűrészgép Morrison
- Fűrészgép Garland
- Fűrészgép Donau Elektronik
- Fűrészgép Chicago Pneumatic
- Fűrészgép Bestgreen
- Fűrészgép Maxbear
- Fűrészgép Evolution
- Fűrészgép Extralink
- Fűrészgép Stalco
Legújabb útmutatók Fűrészgép
15 Október 2024
15 Október 2024
15 Október 2024
15 Október 2024
15 Október 2024
14 Október 2024
14 Október 2024
14 Október 2024
14 Október 2024
14 Október 2024