Használati útmutató Jensen Power 900

Jensen hi-fi rendszer Power 900

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Jensen Power 900 (48 oldal) a hi-fi rendszer kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/48

POWER Amplifiers

Installation & Operation Manual

Amplificadores Po

Amplificadores PoAmplificadores Power

wer

werwer

Manual de Instalación y Operación

Manual de Instalación y OperaciónManual de Instalación y Operación

Amplificateurs Po

Amplificateurs PoAmplificateurs Power

wer

werwer

Manual de Installa

Manual de InstallaManual de Installation et Oper

tion et Oper

tion et Opertion et Operation

ation

ationation

Contents

ContentsContents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Features and Specifications . . . . . . . . . . . . . . . 2

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Power Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Speaker Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Indicators and Controls . . . . . . . . . . . . . . . . . . 10

Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Remote Input Level Control . . . . . . . . . . . . . . . 11

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . 12

CEA Power Output . . . . . . . . . . . . . . . . . . . . . . 13

Contenido

ContenidoContenido

Introducción . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Características y Especificaciones . . . . . . . . .16

Instalación. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Cableado de Energía . . . . . . . . . . . . . . . . . . . . .18

Cableado de Altavoz . . . . . . . . . . . . . . . . . . . . .20

Indicadores y Controles . . . . . . . . . . . . . . . . . .24

Testeo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Control de Nivel de Entrada Remoto . . . . . . . .25

Localización de Problemas . . . . . . . . . . . . . . . .26

Salida de Energía CEA. . . . . . . . . . . . . . . . . . . .27

TTable des matières

able des matières

able des matièresable des matières

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Fonctions et spécifications . . . . . . . . . . . . . . . 30

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Câblage puissant. . . . . . . . . . . . . . . . . . . . . . . . 32

Câblage des haut parleurs . . . . . . . . . . . . . . . . 34

Indicateurs et contrôles . . . . . . . . . . . . . . . . . . 38

Essais. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Contrôle du niveau d'entrée à distance . . . . . 39

Dépannage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Sortie de puissance CEA . . . . . . . . . . . . . . . . . 41

400, 760, 880, 900, 920, 1050

400, 760, 880, 900, 920, 1050400, 760, 880, 900, 920, 1050

PowerPlus Amplifiers

POWER Amplifiers

Intr

IntrIntroduction

oduction

oductionoduction

The Jensen Power series of amplifiers were designed to meet or exceed the

CEA-2006 test standards. These new standards give all participating

manufacturers (and many don't participate) a baseline when comparing

amplifiers of similar power output. The CEA Power rating protects you, the

customer. “Power is power – it doesn't matter who makes it,” is not always true.

What does matter is whether the power can be produced in the first place. The

RMS rating is the true power you are getting. At Jensen, to be fair to you and to

the competition, we rate our amps in the two most popular ratings, including

the CEA RMS rating. So feel confident that your Jensen purchase decision

was a sound one, and remember "If it's Too Loud, You're Too Old."

Before You Begin

We need to get the legal stuff out of the way, so please keep reading.

Afterwards, you’ll be armed with the knowledge to install your new hard-hitting,

speaker-pumping Jensen amplifier.

Exposure to loud sounds or music can permanently damage your hearing.

Unfortunately, in many cases, the damage is not noticeable until years later. In

addition, loud music may hinder your ability to hear traffic, police, and fire or

emergency vehicles. Please be responsible and have respect for other people

by listening at moderate volumes!

Warranty Service

If your Jensen amplifier should ever require service, you will need the original

dated receipt. If you must return the unit for any reason, always include the

receipt with the product.

POWER Amplifiers

FFea

eaeatur

tur

turtures and Specifications

es and Specifications

es and Specificationses and Specifications

Your new Jensen Power mobile stereo power amplifier is the amplifier of

choice for the high demands of auto sound reproduction. With its deep-bass

reproduction and plenty of reserve power, low harmonic distortion and neutral

reproduction, the Power series of amplifiers takes Mobile Hi-Fi to new heights.

Like all Jensen products, when it comes to accurate sound reproduction the

Power series takes a back seat to no one. Jensen will bring your Hi-Fi

experience to new heights with the following features:

• MOSFET Power Supply

• High Current Bi-Polar Output Transistors

• Optimized Class B Design Minimizes Distortion and Reduces Idle Current

• Easily Drives 2-Ohm Loads

• Pass-Thru RCA's

• Variable Bass EQ 0 - 12dB @ 45 Hz

• 12dB / Octave Low Pass and High Pass filters

• Variable Input Level 400mV - 5V

• Short Circuit, DC-offset and Thermal Overload Protection Circuitry

• Diagnostic LED's - Green: Power, Red: Standby / Fault

Power 400 / 760 / 880 / 920

• Low Pass Filter 40 - 300 Hz

• High Pass Filter 40 - 300 Hz

• High Pass / Low Pass / Full Range Selector Switch

• Stereo / Mono Mode Switch (Power 400 and 880 only)

• 2/ 3 / 4 Channel Mode Switch (Power 760 and 920 only))

Power 900 / 1050

• Mono Subwoofer Amp

• Low Pass Filter 40 - 240 Hz (Power 900)

• Low Pass Filter 40 - 150 Hz (Power 1050)

• Subsonic Filter 10 - 40 Hz, 12dB / octave (Power 900)

• Subsonic Filter 15 - 55 Hz, 12dB / octave (Power 1050)

• Remote Input Level Control (Remote Bass Control) w/ 5 Meter Interface

Cable

Specifications

Power 400 / 760 / 880 / 920

• Load Impedance: 2 / 4-Ohm

• Signal to Noise @ 1 kHz: >100dB (rated power)

• Channel Separation @ 1 kHz: >60dB

• Frequency Response: 5-60 kHz, -3dB

• Input Impedance: 20 kHz, nominal

• THD+N @ 5 Watts: 0.02%, 1 kHz, 14.4VDC

Power 900 / 1050

• Signal to Noise @ 120 Hz: >100dB (Rated Power)

• Channel Separation Not Applicable

• THD+N @ 5 Watts: 0.02%, 125 Hz, 14.4VDC

Power Output

RMS Power Output @ 2% THD+N, 1kHz, 14.4VDC

Power 400

• 75 x 2 Watts, 4-Ohm

• 100 x 2 Watts, 2-Ohm

• 200 x 1 Watts, 4-Ohm Bridged

Power 760

• 75 x 4 Watts, 4-Ohm

• 100 x 4 Watts, 2-Ohm

• 190 x 2 Watts, 4-Ohm Bridged Stereo

Power 880

• 135 x 2 Watts, 4-Ohm

• 220 x 2 Watts, 2-Ohm

• 440 x 1 Watts, 4-Ohm Bridged

Power 900

• 300 x 1 Watts, 4-Ohm

• 450 x 1 Watts, 2-Ohm

Power 920

• 100 x 4 Watts, 4-Ohm

• 140 x 4 Watts, 2-Ohm

• 230 x 2 Watts, 4-Ohm Bridged Stereo

Power 1050

• 350 x 1 Watts, 4-Ohm

• 525 x 1 Watts, 2-Ohm

Specifications subject to change without notice.

POWER Amplifiers

Installa

InstallaInstallation

tion

tiontion

Before you begin the installation of your Power series amp remember, there

are two ways to do things – right and twice! Use the proper installation

techniques, tools and accessories to ensure that your Jensen Power series

amp will put out all the power it was designed to. If necessary, seek a

professional installer to have the amplifier installed correctly. Most mobile amp

installations do not have the proper gauge wire for power and ground – do not

let your amp be a victim of this common installation oversight!

NOTE: This device is a high-power audio amplifier intended for

installation in vehicles with a 12-Volt negative ground electrical system.

Attempting to connect or operate the amplifier with another type of

electrical system may cause damage to the amplifier or the electrical

system.

Installation Assistance

For installation assistance, call 1-800-323-4815 during normal business hours,

or visit www.jensen.com at any time.

Supplies and Tools Needed

To install the amplifier, you will need tools, supplies and adapters. It is best to

make sure you have everything you need before you start.

Supplies

• Black electrical tape

• Amplifier Installation Kit

Tools

• Cordless drill with assortment of bits

• Flat-head and Philips screwdrivers

• Wire cutters/strippers

• Crimping tool

• 12-volt test light or digital multimeter

• Wire brush, sandpaper or scraping tool (ground connection to vehicle should

be a clean, unpainted metal surface)

Disconnect Battery

Disconnect the negative (-) battery cable before starting the installation. Check

the battery ground (there should be two (2) ground wires coming from the

battery – one going to the starter mounting bolt or engine block and another

going to the vehicle chassis) and make sure the battery is grounded to the

chassis with at least a #8 gauge wire. Also check the alternator connections,

making sure they are tight and free from corrosion, rust or dirt.

Location and Mounting

The amplifier’s compact design allows great flexibility in mounting. Common

mounting locations include under the front passenger seat or in the trunk area.

When selecting a location, remember that amplifiers generate heat. Select a

location on a flat surface away from heat and moisture where air can circulate

around the amplifier.

Place the amplifier in the mounting location and mark the positions of the holes

with a marker, pen or pencil. Carefully drill the mounting holes in the marked

positions, then use the supplied mounting screws to securely fasten the

amplifier to the mounting surface.

WARNING: Do not cover the amplifier with carpets or enclose it behind

interior trim panels, and do not mount the amplifier in an inverted or

upside down configuration. Be sure the mounting location and the

drilling of pilot holes will not damage any wires, control cables, fuel

lines, fuel tanks, hydraulic lines or other vehicle systems or components.

Routing Wires

Proper wiring connections are illustrated on the following pages. If wiring

connections are made incorrectly, the unit will not operate properly and could

become permanently damaged. Follow the installation instructions carefully, or

have the amplifier installed by an experienced technician.

Termékspecifikációk

Márka:	Jensen
Kategória:	hi-fi rendszer
Modell:	Power 900

Szüksége van segítségre?

Ha segítségre van szüksége Jensen Power 900, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók hi-fi rendszer Jensen

Jensen Elite-303 Útmutató

27 Augusztus 2024

Jensen JMS2212 Útmutató

25 Augusztus 2024

Jensen Elite-202 Útmutató

21 Július 2024

Jensen Power 900 Útmutató

19 Július 2024

Jensen MS30 Útmutató

10 Július 2024

Jensen Power 880 Útmutató

10 Július 2024

Útmutatók hi-fi rendszer

Legújabb útmutatók hi-fi rendszer

NEC NP01SW1 Útmutató

9 Április 2025

Klipsch ProMedia Ultra 2.0 Útmutató

6 Április 2025

Vaxis Atom 500 Útmutató

2 Április 2025

INKEE Benbox Útmutató

1 Április 2025

JL Audio SlamPak SLPK-CAN-SPYDER1 Útmutató

31 Március 2025

Teradek Bolt 10K Útmutató

29 Március 2025

Teradek Bolt 500 Útmutató

29 Március 2025

Teradek Cubelet 655 Útmutató

29 Március 2025

Teradek Cube Series Útmutató

29 Március 2025

Teradek Cube 725 Útmutató

29 Március 2025