Használati útmutató Intel AXX10GBIOMOD

Intel hálózati kártya/adapter AXX10GBIOMOD

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Intel AXX10GBIOMOD (60 oldal) a hálózati kártya/adapter kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/60
In
In
In
InIntel
tel
tel
teltel®
®
®
®® I/O Expansion
I/O Expansion
I/O Expansion
I/O Expansion I/O Expansion
Modules
Modules
Modules
Modules Modules
Har
Har
Har
HarHardwar
dwar
dwar
dwardware Specifica
e Specifica
e Specifica
e Specificae Specification
tion
tion
tion tion
Intel order number: D44901-008
Revision 1.2
September 2010
Enterprise Platforms and Services Division
Revision History Intel® I/O Expansion Modules
Revision History
Revision History
Revision History
Revision History Revision History
Date Revision
Number
Modifications
March 2009 1.0 Initial Release.
November 2009 1.1 Added AXXIBQDRIOMOD.
September 2010 1.2 Added new SAS modules and IB QDR modules.
Disclaimers
Disclaimers
Disclaimers
Disclaimers Disclaimers
Information in this document is provided in connection with Intel ® products. No license, express
or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel
assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to
sale and/or use of Intel products including liability or warranties relating to fitness for a particular
purpose, merchantability, or infringement of any patent, copyright or other intellectual property
right. Intel products are not intended for use in medical, life saving, or life sustaining
applications. Intel may make changes to specifications and product descriptions at any time,
without notice.
Designers must not rely on the absence or characteristics of any features or instructions marked
"reserved" or "undefined." Intel reserves these for future definition and shall have no
responsibility whatsoever for conflicts or incompatibilities arising from future changes to them.
This document contains information on products in the design phase of development. Do not
finalize a design with this information. Revised information will be published when the product
is available. Verify with your local sales office that you have the latest datasheet before
finalizing a design.
The Intel® I/O Expansion Modules may contain design defects or errors known as errata which
may cause the product to deviate from published specifications. Current characterized errata
are available on request.
Intel Corporation server baseboards contain a number of high-density VLSI and power delivery
components that need adequate airflow to cool. Intel’s own chassis are designed and tested to
meet the intended thermal requirements of these components when the fully integrated system
is used together. It is the responsibility of the system integrator that chooses not to use Intel
developed server building blocks to consult vendor datasheets and operating parameters to
determine the amount of air flow required for their specific application and environmental
conditions. Intel Corporation cannot be held responsible if components fail or the server board
does not operate correctly when used outside any of their published operating or non-operating
limits.
Intel and Xeon are trademarks or registered trademarks of Intel Corporation.
*Other brands and names may be claimed as the property of others.
Copyright © Intel Corporation 2010.
Revision 1.2
Intel order number: D44901-008
ii
Intel® I/O Expansion Modules Table of Contents
Table of Contents
Table of Contents
Table of Contents
Table of Contents Table of Contents
1.Introduction .......................................................................................................................... 1
2.Dual Port GbE I/O Module (AXXGBIOMOD) ....................................................................... 3
2.1Feature Set .............................................................................................................. 3
2.2Functional Block Diagram ........................................................................................ 4
2.3Mechanical Dimensions ........................................................................................... 5
2.4 Intel® 82571EB Gb Ethernet Controller .................................................................... 6
2.5EEPROM ................................................................................................................. 7
2.6PCI Express* p3-x4 Connector ..................................................................................... 7
2.7Ethernet Magjack ..................................................................................................... 7
3.External 4 Port SAS I/O Module (AXXSASIOMOD) ............................................................ 8
3.1Feature Set .............................................................................................................. 8
3.2Functional Block Diagram ........................................................................................ 9
3.3Mechanical Dimensions ......................................................................................... 10
3.4LSI* SAS1064E 3.0 Gbit/s Serial Attached SCSI Controller .................................. 11
3.4.1Features of the LSI* SAS1064E ............................................................................ 13
3.5External Flash Memory .......................................................................................... 13
3.6PCI Express* p3-x4 Connector ................................................................................... 13
3.7External 4 SAS Connector .................................................................................... 13
4.InfiniBand* (SDR) Module (AXXIBIOMOD) ....................................................................... 15
4.1Feature Set ............................................................................................................ 15
4.2Functional Block Diagram ...................................................................................... 16
4.3Mechanical Dimensions ......................................................................................... 17
4.4LED Functionality ................................................................................................... 18
4.5PCI Express* p3-x4 Connector ................................................................................... 19
4.6External Connector ................................................................................................ 19
5.Internal 4-port LSI 1064e SAS I/O Module (AXX4SASMOD) ........................................... 20
5.1Major Component Diagram .................................................................................... 20
5.2Functional Block Diagram ...................................................................................... 21
5.3Feature Set ............................................................................................................ 21
5.4Mechanical Drawings ............................................................................................. 22
6.Integrated RAID Module SROMBSASMR (AXXROMBSASMR) ....................................... 24
Revision 1.2
Intel order number: D44901-008
iii
Table of Contents Intel® I/O Expansion Modules
6.1Product Overview .................................................................................................. 24
6.2Hardware Architectural Features ........................................................................... 24
6.3Block Diagram ....................................................................................................... 25
6.4Controller Layout ................................................................................................... 25
6.4.1Mechanical Drawings ............................................................................................. 26
6.4.2Jumpers and Connectors ....................................................................................... 27
7.Quad Port GbE I/O Module (AXX4GBIOMOD2) ................................................................ 28
7.1Feature Set ............................................................................................................ 28
7.2Functional Block Diagram ...................................................................................... 29
7.3Mechanical Drawings ............................................................................................. 30
7.4 Intel® 82576 1 Gb Ethernet Controller ................................................................... 31
7.5EEPROM ............................................................................................................... 31
7.6PCI Express* p4-x8 Connector ................................................................................... 32
7.7Gbit Ethernet Connector ........................................................................................ 32
8.Dual Port 10GbE I/O Module (AXX10GBIOMOD) ............................................................. 33
8.1Feature Set ............................................................................................................ 33
8.2Functional Block Diagram ...................................................................................... 34
8.3Mechanical Drawings ............................................................................................. 35
8.4 Intel® 82598 10 Gb Ethernet Controller ................................................................. 36
8.5EEPROM ............................................................................................................... 37
8.6PCI Express* p4-x8 Connector ................................................................................... 37
8.7CX4 Ethernet Connector ........................................................................................ 37
9.InfiniBand* (QDR) I/O Modules .......................................................................................... 38
9.1Support Matrix ....................................................................................................... 38
9.2Feature List ............................................................................................................ 39
9.3Functional Block Diagram ...................................................................................... 39
9.4LED Functionality ................................................................................................... 40
9.5PCI Express* p4-x4 Connector ................................................................................... 40
9.6External Connector ................................................................................................ 40
10.Intel® Integrated RAID Module RMS2MH080 .................................................................... 41
10.1Technical Specifications ........................................................................................ 41
11.Integrated RAID Module RMS2AF040 & RMS2AF080 ...................................................... 44
11.1Technical Specifications ........................................................................................ 45
11.2 Intel® Integrated RAID Module RMS2AF0x0 Characteristics ................................. 46
12.Integrated RAID Module RMS2LL040 & RMS2LL080 ...................................................... 48
Revision 1.2
Intel order number: D44901-008
iv
Intel® I/O Expansion Modules Table of Contents
12.1Technical Specifications ........................................................................................ 49
12.2 Intel® Integrated RAID Module RMS2LL0x0 Characteristics ................................. 50
Revision 1.2
Intel order number: D44901-008
v
List of Figures Intel® I/O Expansion Modules
List of Figures
List of Figures
List of Figures
List of Figures List of Figures
Figure 1. Dual Port GbE I/O Module ............................................................................................. 3
Figure 2. Dual Gb Ethernet I/O Module Block Diagram ................................................................ 4
Figure 3. Dual Gb Ethernet I/O Module Dimensions; Top and Side Views ................................... 5
Figure 4. Dual Gb Ethernet I/O Module Dimensions; Bottom View............................................... 6
Figure 5. External 4 Port SAS I/O Module (AXXSASIOMOD) ...................................................... 8
Figure 6. External SAS I/O Module Block Diagram ...................................................................... 9
Figure 7. SAS I/O Module Dimensions; Top and Side Views ..................................................... 10
Figure 8. SAS I/O Module Dimensions; Bottom View ................................................................. 11
Figure 9. LSI* SAS1064E Block Diagram ................................................................................... 12
Figure 10. Single InfiniBand* (SDR) Module (AXXIBIOMOD) ..................................................... 15
Figure 11. InfiniBand* I/O Module Block Diagram ...................................................................... 16
Figure 12. InfiniBand* I/O Module Dimensions; Top and Side Views ......................................... 17
Figure 13. InfiniBand* I/O Module Dimensions; Bottom View ..................................................... 18
Figure 14. Intel® SAS Entry RAID Module AXX4SASMOD Component and Connector ............. 20
Figure 15. Intel® SAS Entry RAID Module AXX4SASMOD Functional Block Diagram ............... 21
Figure 16. AXX4SASMOD Mechanical Dimensions (Top View) ................................................. 22
Figure 17. AXX4SASMOD Mechanical Dimensions (Bottom View) ............................................ 23
Figure 18. Hardware Block Diagram ........................................................................................... 25
Figure 19. Intel® Integrated RAID Controller SROMBSASMR Physical Layout .......................... 25
Figure 20. Primary Side .............................................................................................................. 26
Figure 21. Secondary Side ......................................................................................................... 26
Figure 22. Jumpers and Connectors ........................................................................................... 27
Figure 23. Quad-Port GbE I/O Module (AXX4GBIOMOD2) ........................................................ 28
Figure 24. Quad-port Gigabit Ethernet I/O Module Block Diagram ............................................. 29
Figure 25. Quad-Port GbE I/O Module Mechanical Drawing ...................................................... 30
Figure 26. Quad-Port GbE I/O Module Mechanical Drawing ...................................................... 31
Figure 27. Dual Port 10GbE I/O Module ..................................................................................... 33
Figure 28. Dual 10 Gb Ethernet I/O Module Block Diagram ....................................................... 34
Figure 29. Dual 10 Gb Ethernet I/O Module Dimensions: Top and Side Views .......................... 35
Figure 30. Dual 10 Gb Ethernet I/O Module Dimensions: Bottom View...................................... 36
Figure 31. AXXIBQDRIOMO ....................................................................................................... 38
Figure 32. AXXIBQDRSR169X ................................................................................................... 38
Revision 1.2
Intel order number: D44901-008
vi
Intel® I/O Expansion Modules List of Figures
Figure 33. AXXIBQDRIOMV ....................................................................................................... 38
Figure 34. InfiniBand* (QDR) I/O Module Block Diagram ........................................................... 39
Figure 35. RMS2MH080 Card Layout ......................................................................................... 42
Figure 36. RMS2MH080 Block Diagram ..................................................................................... 43
Figure 37. RMS2AF080 Card Layout .......................................................................................... 46
Figure 38. RMS2AF040 Hardware Block Diagram ..................................................................... 47
Figure 39. RMS2AF080 Hardware Block Diagram ..................................................................... 47
Figure 40. Intel® Integrated RAID Module RMS2LL0x0 Characteristics ..................................... 50
Figure 41. RMS2LL040 Hardware Block Diagram ...................................................................... 51
Figure 42. RMS2LL080 Hardware Block Diagram ...................................................................... 51
Revision 1.2
Intel order number: D44901-008
vii
List of Tables Intel® I/O Expansion Modules
List of Tables
List of Tables
List of Tables
List of Tables List of Tables
Table 1. I/O Module Support Matrix .............................................................................................. 1
Table 2. 50-pin I/O Module Connector Pin-Out ............................................................................. 2
Table 3. External SAS p8-x4 Connector Pin-Out ............................................................................. 14
Table 4. AXX4SASMOD Storage Mode ...................................................................................... 22
Table 5. Hardware Architectural Features .................................................................................. 24
Table 6. Support Matrix Data ...................................................................................................... 38
Table 7. RMS2MH080 Specifications ......................................................................................... 41
Table 8. RMS2AF0#0 Specifications .......................................................................................... 45
Table 9. RMS2LL0#0 Specifications ........................................................................................... 49
Revision 1.2
Intel order number: D44901-008
viii
Intel® I/O Expansion Modules List of Tables
Revision 1.2
Intel order number: D44901-008
ix
< This page intentionally left blank. >
Intel® I/O Expansion Modules Introduction
1. Introduction
The Intel® Server Boards support a variety of Intel® I/O Expansion Module options using p10-x4 PCI
Express* Gen2 Mezzanine connectors on the server board. Each mezzanine connector is a 50-
pin, surface mount, 0.8 mm pitch header.
The Intel® I/O Expansion Modules are designed to fit Intel® Server Boards. The table below
shows the support matrix for the Intel® I/O Expansion Modules.
Table 1. I/O Module Support Matrix
Intel®
I/O Expansion Module
Product
Code
S5000PAL
S5400SF
S5520UR
S5500WB
S5520HC
S5520SC
S5500BC
SR1680MV
S3420GPRX
Single Connector
Dual-port Intel 82571EB GbE AXXGBIOMOD 3
3
3
33 3
3
3
33 3
3
3
33 3
3
3
33 3
3
3
33 2 2 2 2
External 4-port SAS (LSI1064e) AXXSASIOMOD 3
3
3
33 3
3
3
33 3
3
3
33 3
3
3
33 3
3
3
33 2 2 2 2
Single-port InfiniBand* (SDR) AXXIBIOMOD 3
3
3
33 3
3
3
33 3
3
3
33 2 2 2 2 2 2
Double Connector
Dual-port Intel 82598EB
10GbE* AXX10GBIOMOD 2 2 2 2 2 2 3
3
3
33 3
3
3
33 3
3
3
33
4-port Intel 82576EB GbE* AXX4GBIOMOD2 2 2 2 2 2 2 3
3
3
33 3
3
3
33 3
3
3
33
Single-port InfiniBand* (QDR) AXXIBQDRIOMOD 2 2 2 2 2 2 2 2 3
3
3
33
Single-port InfiniBand* (QDR) AXXIBQDRSR169X 2 2 2 2 2 2 2 2 3
3
3
33
Single-port InfiniBand* (QDR) AXXIBQDRIOMV 2 2 2 2 2 2 2 2 3
3
3
33
SAS Controllers
4-port Internal SAS
(LSI1064e)* AXX4SASMOD 2 2 2 2 3
3
3
33 3
3
3
33 3
3
3
33 3
3
3
33 3
3
3
33
4-port Internal SAS HW RAID
(LSI1078)* AXXROMBSASMR 2 2 2 2 3
3
3
33 3
3
3
33 3
3
3
33 3
3
3
33 3
3
3
33
8-port 6Gb Integrated RAID
(LSI2108) AXXRMS2MH080 2 2 2 2 2 2 2 3
3
3
33 3
3
3
33
4-port/8-port 6Gb RAID
(LSI2008)
AXXRMS2LL040 /
AXXRMS2LL080
2 2 2 2 3
3
3
33 3
3
3
33 3
3
3
33 3
3
3
33 3
3
3
33
4-port/8-port 6Gb RAID
(LSI2008) AXXRMS2AF040 /
AXXRMS2AF080
2 2 2 2 3
3
3
33 3
3
3
33 3
3
3
33 3
3
3
33 3
3
3
33
Revision 1.2
Intel order number: D44901-008
1
Introduction Intel® I/O Expansion Modules
Revision 1.2
Intel order number: D44901-008
2
The following table details the pin-out of the I/O module connector.
Table 2. 50-pin I/O Module Connector Pin-Out
Pin Pin Name Name
1 3V3_STBY 2 3V3_STBY
3 PE_RST_G2_PM_N 4 GND
5 GND 6 PE0_DUAL_TX_DP<0>
7 GND 8 PE0_DUAL_TX_DN<0>
9 PE0_DUAL_RX_DP<0> 10 GND
11 PE0_DUAL_RX_DN<0> 12 GND
13 GND 14 PE0_DUAL_TX_DP<1>
15 GND 16 PE0_DUAL_TX_DN<1>
17 PE0_DUAL_RX_DP<1> 18 GND
19 PE0_DUAL_RX_DN<1> 20 GND
21 GND 22 PE0_DUAL_TX_DP<2>
23 GND 24 PE0_DUAL_TX_DN<2>
25 PE0_DUAL_RX_DP<2> 26 GND
27 PE0_DUAL_RX_DN<2> 28 GND
29 GND 30 PE0_DUAL_TX_DP<3>
31 GND 32 PE0_DUAL_TX_DN<3>
33 PE0_DUAL_RX_DP<3> 34 GND
35 PE0_DUAL_RX_DN<3> 36 GND
37 GND 38 CLK_100M_LP_PE_P
39 GND 40 CLK_100M_LP_PE_N
41 PE_WAKE_N 42 GND
43 3V3 44 3V3
45 3V3 46 3V3
47 3V3 48 3V3
49 3V3 50 3V3
Intel® I/O Expansion Modules Dual Port GbE I/O Module (AXXGBIOMOD)
2. Dual Port GbE I/O Module (AXXGBIOMOD)
The dual Gigabit (Gb) I/O module provides two additional 10/100/1000Mbit external
connections. This section provides a high-level description of the implementation of this I/O
module.
Figure 1. Dual Port GbE I/O Module
2.1 Feature Set
The dual Gb Ethernet I/O module supports the following feature set:
Intel® 82571EB Gb Ethernet Controller
Dual port
Ethernet interface for 1000BASE-T, 100BASE-TX, and 10BASE-T
Can be implemented in a very small area
Onboard System Management Bus (SMB) ports
PCI Express* p12-x4 interface
Supports two external Gb Ethernet ports
Revision 1.2
Intel order number: D44901-008
3
Dual Port GbE I/O Module (AXXGBIOMOD) Intel ® I/O Expansion Modules
2.2 Functional Block Diagram
Intel
®
82571EB
50-Pin Connector
ESB2-E
Server Board
PCIe* p13-x4
Ethernet
PCIe* p13-x4
EEPROM
Ethernet
Figure 2. Dual Gb Ethernet I/O Module Block Diagram
Revision 1.2
Intel order number: D44901-008
4
Intel® I/O Expansion Modules Dual Port GbE I/O Module (AXXGBIOMOD)
2.3 Mechanical Dimensions
Figure 3. Dual Gb Ethernet I/O Module Dimensions; Top and Side Views
Revision 1.2
Intel order number: D44901-008
5
Dual Port GbE I/O Module (AXXGBIOMOD) Intel ® I/O Expansion Modules
Figure 4. Dual Gb Ethernet I/O Module Dimensions; Bottom View
2.4 Intel® 82571EB Gb Ethernet Controller
The Intel® 82571EB Gb Ethernet Controller is a single, compact component with two fully
integrated Gb Ethernet Media Access Control (MAC) and physical layer (PHY) ports. This
device uses the PCI Express* architecture (Rev. 1.0a) and also enables a dual-port Gb Ethernet
implementation. The Intel® 82571EB Gb Ethernet Controller provides two IEEE 802.3 Ethernet
interfaces for 1000BASE-T, 100BASE-TX, and 10BASE-T applications. Both ports also
integrate a Serializer-Deserializer (SerDes) to support 1000BASE-SX or 1000BASE-LX (optical
fiber) and Gb backplane applications. In addition to managing MAC and PHY Ethernet layer
functions, the controller manages PCI Express* packet traffic across its transaction, link, and
physical/logical layers.
The Intel® 82571EB Gb Ethernet Controller for PCI Express* is designed for high-performance
and low memory latency. The device is optimized to connect to a system Memory Control Hub
(MCH) using up to four PCI Express* lanes. Wide internal data paths eliminate performance
bottlenecks by efficiently handling large address and data words. Combining parallel and
pipelined logic architecture optimized for Gb Ethernet and for independent transmit and receive
queues, the controller efficiently handles packets with minimum latency. The controller includes
advanced interrupt-handling features and uses efficient ring-buffer descriptor data structures
with up to 64 packet descriptors cached on chip. A large 48 Kbyte per port on-chip packet buffer
maintains superior performance. Using hardware acceleration, the controller offloads tasks from
Revision 1.2
Intel order number: D44901-008
6
Intel® I/O Expansion Modules Dual Port GbE I/O Module (AXXGBIOMOD)
Revision 1.2
Intel order number: D44901-008
7
the host, such as checksum calculations for Transmission Control Protocol (TCP), User
Datagram Protocol (UDP), and Internet Protocol (IP); header and data splitting; and TCP
segmentation.
2.5 EEPROM
The Dual Gb Ethernet I/O module provides a SPI serial EEPROM to store configuration and
informational data. This includes pre-boot configuration data, MAC addresses, and serial
numbers for the 82571EB.
2.6 PCI Express* p16-x4 Connector
The Dual Gb Ethernet I/O module contains one 50-pin connector.
2.7 Ethernet Magjack
The Dual Gb Ethernet I/O module contains two Ethernet Magjacks which are compatible with
10/100/1000 Mbps Ethernet connection.
External 4 Port SAS I/O Module (AXXSASIOMOD) Intel ® I/O Expansion Modules
3. External 4 Port SAS I/O Module (AXXSASIOMOD)
The SAS I/O module provides the availability to connect up to four external SAS ports to an
Intel® Server Board. This section provides a high-level description of the implementation of this
Intel® I/O Expansion Modules.
Figure 5. External 4 Port SAS I/O Module (AXXSASIOMOD)
3.1 Feature Set
The SAS I/O module supports the following feature set:
LSI* LSISAS1064E SAS/SATA controller
Four-port, 3.0 Gbit/s SAS/SATA controller
Integrated Arm966 microprocessor core
Compliant with Fusion-MPT* architecture
x4 PCI Express*
Provides four external SAS/SATA ports for connecting multiple SAS/SATA devices.
Revision 1.2
Intel order number: D44901-008
8
Intel® I/O Expansion Modules External 4 Port SAS I/O Module (AXXSASIOMOD)
3.2 Functional Block Diagram
LSISAS 1064
50-Pin Connector
ESB2-E PCIe* X4 4 lane SAS
PCIe* X4
External
Flash
SAS Drives
Server Board
Figure 6. External SAS I/O Module Block Diagram
Revision 1.2
Intel order number: D44901-008
9
External 4 Port SAS I/O Module (AXXSASIOMOD) Intel ® I/O Expansion Modules
3.3 Mechanical Dimensions
Figure 7. SAS I/O Module Dimensions; Top and Side Views
Revision 1.2
Intel order number: D44901-008
10
Intel® I/O Expansion Modules External 4 Port SAS I/O Module (AXXSASIOMOD)
Figure 8. SAS I/O Module Dimensions; Bottom View
3.4 LSI* SAS1064E 3.0 Gbit/s Serial Attached SCSI Controller
Integrated on the SAS I/O module is an LSI* SAS1064E Serial Attached SCSI (SAS) controller.
The LSISAS1064E is a four-port, 3.0 Gbit/s SAS/SATA controller compliant with the Fusion-
MPT* architecture, and provides a four-lane PCI Express* interface. The point-to-point
interconnect feature of the PCI Express* bus limits the electrical load on links, allowing
increased transmission and reception frequencies. PCI Express* transmission and reception
data rates for each full-duplex interconnect is 2.5 Gbit/s.
Revision 1.2
Intel order number: D44901-008
11
External 4 Port SAS I/O Module (AXXSASIOMOD) Intel ® I/O Expansion Modules
4
Figure 9. LSI* SAS1064E Block Diagram
PCI Express* implements a switch-based technology to interconnect a large number of devices.
Communication over the serial interconnect is accomplished using packet-based
communication protocol. Quality of Service (QOS) features provide differentiated transmission
performance for different applications. Hot plug/hot swap support enables “always-on” systems.
Enhanced error handling features, such as end-to-end CRC (ECRC) and Advanced Error
Reporting, make PCI Express suitable for robust, high-end server applications. Hot plug, power
management, error handling, and interrupt signaling are accomplished using packet-based
messaging rather than sideband signals.
Each of the four SAS PHYs on the LSISAS1064E is capable of SAS/SATA link rates of 3.0
Gbit/s and 1.5 Gbit/s. The user can configure ports as wide or narrow. Narrow ports have one
PHY per port. Wide ports have two, three, or four PHYs per port. Each port supports the SSP,
SMP, STP, and SATA protocols.
The SAS interface uses the proven SCSI command set to ensure reliable data transfers, while
providing the connectivity and flexibility of point-to-point serial data transfers. The SAS interface
provides improved performance, simplified cabling, smaller connectors, lower pin count, and
lower power requirements when compared to parallel SCSI. SAS controllers leverage an
electrical and physical connection interface that is compatible with Serial ATA technology.
The LSISAS1064E uses the Fusion-MPT* (Message Passing Technology) architecture, which
features a performance-based message passing protocol that offloads the host CPU by
completely managing all I/Os and minimizes system bus overhead by coalescing interrupts. The
proven Fusion-MPT* architecture requires only thin, easy-to-develop device drivers independent
of the I/O bus. LSI* Logic provides these device drivers.
Revision 1.2
Intel order number: D44901-008
12
Intel® I/O Expansion Modules External 4 Port SAS I/O Module (AXXSASIOMOD)
3.4.1 Features of the LSI* SAS1064E
SAS and SSP features:
Each PHY supports 3.0 Gbit/s and 1.5 Gbit/s SAS data transfers
Provides a serial, point-to-point, enterprise-level storage interface
Supports wide transfers consisting of 2, 3, or 4 PHYs
Supports narrow ports consisting of a single PHY
Transfers data using SCSI information units
Compatible with SATA target devices
SATA and STP Features:
Supports 3.0 Gbit/s and 1.5 Gbit/s SATA data transfers
Supports 3.0 Gbit/s and 1.5 Gbit/s STP data transfers
Usability features:
Simplifies cabling with point-to-point, serial architecture
Provides drive spin-up sequencing control
Provides up to two LED signals for each SAS/SATA PHY to indicate drive activity and faults
Provides an SGPIO interface
3.5 External Flash Memory
The SAS I/O module provides a non-volatile 2X8Mbit Flash memory device that stores the
configuration data and operating firmware executed by the LSI1064E embedded CPU.
3.6 PCI Express* p22-x4 Connector
The SAS I/O Module contains one 50-pin SFF-8470 connector matching the one available on
the Intel® S5000PAL Server Board.
3.7 External 4 SAS Connector
The SAS I/O module contains a p22-x4 SAS/SATA connector which allows connections to four
external SAS devices. The pin-out of the external SAS connector is detailed in the following
table.
Revision 1.2
Intel order number: D44901-008
13
External 4 Port SAS I/O Module (AXXSASIOMOD) Intel ® I/O Expansion Modules
Revision 1.2
Table 3. External SAS p23-x4 Connector Pin-Out
Pin Name
S1 SAS0_C_RX_DP
S2 SAS0_C_RX_DN
S3 SAS1_C_RX_DP
S4 SAS1_C_RX_DN
S5 SAS2_C_RX_DP
S6 SAS2_C_RX_DN
S7 SAS3_C_RX_DP
S8 SAS3_C_RX_DN
S9 SAS3_C_TX_DN
S10 SAS3_C_TX_DP
S11 SAS2_C_TX_DN
S12 SAS2_C_TX_DP
S13 SAS1_C_TX_DN
S14 SAS1_C_TX_DP
S15 SAS0_C_TX_DN
S16 SAS0_C_TX_DP
1 GND
2 GND
3 GND
4 GND
5 GND
6 GND
7 GND
8 GND
9 GND
10 GND
11 GND
Intel order number: D44901-008
14
Intel® I/O Expansion Modules InfiniBand* (SDR) Module (AXXIBIOMOD)
4. InfiniBand* (SDR) Module (AXXIBIOMOD)
The 4X SDR InfiniBand* I/O module is based on the Mellanox InfiniHost* MT25204 device with
the integrated Physical Layer SerDes. This card has a single 4X InfiniBand* copper port for
connecting InfiniBand* traffic at up to 10Gbps. This section provides a high-level description of
the implementation of this I/O module. This module is expected to end-of-life with the
S5000PAL/S5400SF server boards, not available for extended life support
Figure 10. Single InfiniBand* (SDR) Module (AXXIBIOMOD)
4.1 Feature Set
The InfiniBand* I/O module supports the following feature set:
3.3V 4x PCI Express* interface
InfiniHost* Lx MT25204 controller chip with integrated InfiniBand* SerDes
One 10Gbps copper port (with 4X IB connector)
16MBits SPI Flash memory for firmware and configuration
32KBytes EEPROM for VPD data
LEDs for physical and logical link status
Power supply circuitry that generates 1.8V and 1.2V rails
Revision 1.2
Intel order number: D44901-008
15
InfiniBand* (SDR) Module (AXXIBIOMOD) Intel® I/O Expansion Modules
Revision 1.2
Intel order number: D44901-008
16
4.2 Functional Block Diagram
Figure 11. InfiniBand* I/O Module Block Diagram
InfiniHost* LX
IB Controller
InfiniBand* 4X Copper
(HIB-B16LFYGCA)
Port 1
InfiniBand*
Port LEDs
SPI Flash
16Mbits
Block Diagram
1.8 V Power
Regulator
1.2 V Power
Regulator
LTC1772
PCIe* 3.3V
PCI Express* Interface Custom BTB
Connector (PN: AEA-BTB-034)
(
A
P-
A
E
A
-BTB-034
)
VPD
EEPROM
32K Bytes
Intel® I/O Expansion Modules InfiniBand* (SDR) Module (AXXIBIOMOD)
4.3 Mechanical Dimensions
Figure 12. InfiniBand* I/O Module Dimensions; Top and Side Views
Revision 1.2
Intel order number: D44901-008
17
InfiniBand* (SDR) Module (AXXIBIOMOD) Intel® I/O Expansion Modules
Figure 13. InfiniBand* I/O Module Dimensions; Bottom View
4.4 LED Functionality
The InfiniBand* I/O module has two LEDs for debug only. They are not visible from the rear
panel.
Physical Link LED (Green)
Steady On: Physical link established
Off: Physical link error, poor connection quality, or no physical connection
Activity LED (Yellow)
Steady On: Data transferring to/from the card across the wire (solid stream)
Blinking: Data transferring to/from the card across the wire
Off: Logical link error or no Rx Char detected
Revision 1.2
Intel order number: D44901-008
18
Intel® I/O Expansion Modules InfiniBand* (SDR) Module (AXXIBIOMOD)
Revision 1.2
Intel order number: D44901-008
19
4.5 PCI Express* p28-x4 Connector
The InfiniBand* I/O Module contains one 50-pin connector.
4.6 External Connector
The InfiniBand* I/O module contains an p28-x4 InfiniBand* connector which allows a 10 Gbps
connection to the InfiniBand* Fabric.
Internal 4-port LSI 1064e SAS I/O Module (AXX4SASMOD) Intel ® I/O Expansion Modules
5. Internal 4-port LSI 1064e SAS I/O Module
(AXX4SASMOD)
The optional Intel® SAS Entry RAID Module AXX4SASMOD includes a SAS1064e controller that
supports p29-x4 PCI Express* link widths and is a single-function PCI Express* end-point device.
The SAS controller supports the SAS protocol as described in the Serial Attached SCSI
Standard, version 1.0, and also supports SAS 1.1 features. A 32-bit external memory bus off the
SAS1064e controller provides an interface for Flash ROM and NVSRAM (Non-volatile Static
Random Access Memory) devices.
The optional Intel® SAS Entry RAID Module AXX4SASMOD provides four SAS connectors that
support up to four hard drives with a non-expander backplane or up to eight hard drives with an
expander backplane.
For more details refer to the Intel® SAS Entry RAID Module Hardware Specification.
5.1 Major Component Diagram
Connector Connector Reference Designators
Type
Pin Count
SAS Connector 0-3 J1B2, J2B1, J3B2, J3B3 Header 7
SES J2A1 Header 3
SGPIO J2A2 Header 4
Software RAID 5 Key
Header
J1A1 Key holder 3
SAS Module Connector J3M1 Mezzanine slot 50
Figure 14. Intel® SAS Entry RAID Module AXX4SASMOD Component and Connector
Revision 1.2
Intel order number: D44901-008
20

Termékspecifikációk

Márka: Intel
Kategória: hálózati kártya/adapter
Modell: AXX10GBIOMOD

Szüksége van segítségre?

Ha segítségre van szüksége Intel AXX10GBIOMOD, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók hálózati kártya/adapter Intel

Intel

Intel AXX10GBIOMOD Útmutató

5 Augusztus 2024

Útmutatók hálózati kártya/adapter

Legújabb útmutatók hálózati kártya/adapter

Mikrotik

Mikrotik RB493 Útmutató

8 Április 2025
EtherWAN

EtherWAN EX41941F Útmutató

3 Április 2025
Vigitron

Vigitron MaxiiView Vi00023 Útmutató

3 Április 2025
AVPro Edge

AVPro Edge AC-MXNET-10G-TCVR Útmutató

2 Április 2025
EtherWAN

EtherWAN TG103H-0802 Útmutató

2 Április 2025
AVPro Edge

AVPro Edge MXNet AC-MXNET-10G-TCVR Útmutató

1 Április 2025
ScreenBeam

ScreenBeam ECB6250 Útmutató

30 Március 2025
Ubiquiti Networks

Ubiquiti Networks USW-Aggregation Útmutató

29 Március 2025
Vigitron

Vigitron Vi22601 Útmutató

15 Március 2025
Vigitron

Vigitron Vi22201 Útmutató

15 Március 2025