Használati útmutató Inner Range Concept C4000 Controller

Inner Range Biztonság Concept C4000 Controller

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Inner Range Concept C4000 Controller (2 oldal) a Biztonság kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/2
Concept 4OOOConcept 4OOO
Concept 4OOOConcept 4OOO
Concept 4OOO
INTEGRATED SECURITY &
ACCESS CONTROL
SYSTEMS
Rev. 3.0 October 2011 P/No: 630025
Accessing the Menu.
You may be allowed to access certain system functions in the Menu.
Logon to the Terminal as described earlier.
(PIN code + OK) The display will show the Area
Status etc. as before.
Now press the MENU key. The Menu key can be
used at any time to return to the Main menu
The display will scroll through the list of Menu
options that you are allowed to access.
Press a digit key to select the option required.
(Option 7 is available to the “Installer” only.)
Note: Some options in Sub-menus (e.g. User
Codes, Review & Test Inputs) require another
digit to be pressed. Display will show a menu list
similar to the one opposite when required.



  
  
 
Keypad Functions in the Menu.
Scrolls up and down a list of available items to view, program
or control. e.g. Users, Zones, Review & Home Auxiliaries.
Moves cursor left or selects previous question if the cursor is at
the start of the field.
Moves cursor right or Scrolls through multiple choice options.
Provides relevant help messages on the display whenever
required. e.g. Will tell you what to do next if you are unsure.
Saves current screen & moves to next question.
Clears the screen or Selects first multiple choice option.
Switches between different modes for selecting an item or
answering a question. e.g. Provides option of selecting an item
by ID no. (Zone E01:Z03) or by name (OFFICE PIR).
In programming questions that require a Yes/No answer, the
“N” (5) key selects No, and the “Y” (9) key selects Yes.
0-Area ON/OFF
1-Info (e.g. Review) 5-Times
2-Access (Users) 6-Misc
3-Isolate 8-Service
4-Test (Zones) 9-Control
- - - ,
Operations while not logged on.
The following operations do not require PIN code access.
,
,
,
Quick Alarm Review. (If enabled in your system)
System Information. (Version information, etc.)
Current system Time and Date.
Home Auxiliary Control. (If enabled in your system)
USER’S QUICK
REFERENCE CARD
FOR ELITE LCD TERMINALS
Notes: 1) For Prisma Colour Graphic Terminals also refer to the Prisma
Terminal User Manual. (P/N: 635060U)
2) For Touchscreen Terminals refer to the Touchscreen Terminal
User Guide. (P/N: 635022UG)
Go to www.innerrange.com.au/products.php and select “Downloads”.
Turn Area/s ON or OFF.
Once you have Logged on to a Terminal, and see the Area status with the “Push
Off” or “Push On” message, you may perform the ON or OFF operations.
At the prompt, turn the displayed Area (or Area List)
OFF or ON by pressing the appropriate key.
Remember: You have a limited time to turn an Area
OFF once you have entered, and a limited time to
exit when you have turned an Area ON.
If you are allowed to control multiple Areas:
-DISPLAY MODE. The Display mode can be
changed from Single Area to Area List and vice
versa, by pressing the Right Arrow key.
-AREA SELECTION. You may select other Areas or
Area Lists by using the Up and Down Arrow keys or
the letter key that the Area name begins with.
After pressing the ON key, the display may show a
message like this. It means that the item displayed
is either faulty or in an alarm state, and the Area will
not turn ON.
Try and rectify the problem before trying again.
If this is not possible, You may be allowed to
ISOLATE the item while the “Zone Problem”
message is displayed, by pressing the OK key.
Access (Un-lock) a Door.
Terminals may be programmed to momentarily Unlock a Door to allow access.
  
  
 



Logon to the Terminal as described earlier.
(PIN + OK) Area Status will display as before.
Press OK a second time to perform the Door
Access operation. (Not necessary for
Terminals/Users designated as “Access Only”)
The display will verify that the operation was
successful, or provide a message showing why
the operation could not be performed.
  
  
 



Acknowledge an Alarm.
Alarm messages must be acknowledged by a User with the appropriate authority.
These messages provide precise information of the type of alarm, the Area it has
occured in, and the Zone or System Input that generated the alarm.
An Alarm message may be displayed on the
Terminal, and indicates which Area the Alarm
has occured in.
Logon to the Terminal as described before.
(PIN code + OK)
The display will show the specific details of the
Alarm and provide a scrolling message if more
than 16 characters.
e.g. “Had Alarm on FRONT DOOR in FOYER”
Note alarm details, then press the OK key to
acknowledge the message. The display will
now show the Area ON / OFF message to allow
you to continue with your operation.
e.g. Turn the Area OFF.






  
  
 



LOGOFF the Terminal.
When you have completed your operations, you must Logoff the Terminal.
Press the END key. (END also lets you start
again, if you make an error entering your PIN)
or
- - - ,
- - - ,
NOTE: Quick Arm/Disarm. Your system may be configured to allow a nominated
Area to be controlled simply by entering your PIN code, then the OFF or ON key.
i.e. OK key not required. (V7.8 or later only with LCD Terminal V8.3 or later)
LOGON to an LCD Terminal.
Logging on is the first step performed in most operations.
  
  
 
  
  
 






- - - , Enter your secret PIN code using the digit keys,
then press the OK key.
If there are no messages to be acknowledged, the
Display will first greet and identify you.
(Note: Greeting option can be disabled if required)
The status of the first Area (or Area List) that you
are allowed to control is displayed, with a prompt to
perform an ON or OFF operation.

Termékspecifikációk

Márka: Inner Range
Kategória: Biztonság
Modell: Concept C4000 Controller

Szüksége van segítségre?

Ha segítségre van szüksége Inner Range Concept C4000 Controller, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Biztonság Inner Range

Inner Range

Inner Range Concept C4000 Controller Útmutató

22 Augusztus 2024

Útmutatók Biztonság

Legújabb útmutatók Biztonság

NetworX

NetworX NX-595E IP Communication Module Útmutató

5 Október 2024
Provision-ISR

Provision-ISR NVR2-4100P Útmutató

23 Szeptember 2024
Gira

Gira 0342 Útmutató

23 Szeptember 2024
Unitron

Unitron Smart Alert Systeem Útmutató

23 Szeptember 2024
Netatmo

Netatmo Welcome Útmutató

22 Szeptember 2024
Provision-ISR

Provision-ISR I4s-371UVVF - Ultra-Vision WDR Útmutató

20 Szeptember 2024
NetworX

NetworX NX-408 Útmutató

20 Szeptember 2024
Theben

Theben Luxa 102.150 - 1020961-2 Útmutató

19 Szeptember 2024
Elro

Elro AB600P - MOTION DETECTOR Útmutató

17 Szeptember 2024
Elro

Elro AG40KE Útmutató

17 Szeptember 2024