Használati útmutató GoldenEar Technology Invisa SP 652

GoldenEar Technology Speaker Invisa SP 652

Olvassa el alább 📖 a magyar nyelvű használati útmutatót GoldenEar Technology Invisa SP 652 (15 oldal) a Speaker kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/15
Owner’s Manual
Invisa SP 652 StereoPointTM One Piece Stereo In-Wall/In-Ceiling Loudspeaker
Invisa®
Series
GoldenEar Invisa SP 652 Manual
Invisa SP 652 Owner’s Manual
2
Congratulations!
Congratulations and thank you for purchasing GoldenEar’s™ Invisa® speakers! You are about to
hear the spectacular difference these very special In-Wall/In-Ceiling speakers will make in your
home’s music system!
Our engineers’ many years of experience in developing loudspeakers has led to these extraordinary
products. In order to ensure that you experience maximum performance, please take a moment
to fully read this owner’s manual and familiarize yourself with the unique installation, assembly
and set-up procedures for your Invisa® speakers.
Please visit our website at www.GoldenEar.com for more information on the technology behind
your new speaker system. If you have additional questions, contact your Authorized GoldenEar™
Dealer or visit the Q&A page in the Tech Support section of our website.
Your New GoldenEar Speakers
GoldenEar Invisa® SP 652 in-ceiling/in-wall speakers are designed to fit beautifully in a wide variety of applications.
Their low-profile grille and nearly invisible design allows for perfect integration in a wide variety of locations within
your home. To get the best performance possible and for a product that lasts a lifetime, we strongly recommend
that you follow the placement and setup guidelines provided in this manual.
Cleaning
Do not use a strong or abrasive cleaner on your new speakers’ grilles. Clean them only with a damp cloth,
but do not get them wet.
Preventing Speaker Damage
GoldenEar Invisa® speakers are efficient and can be driven to loud listening levels with moderate amplifier power.
They are also able to handle the output of very powerful amplifiers. To prevent damage to your speakers, please
read all of the following guidelines before hooking them up.
USE AN APPROPRIATE AMPLIFIER. At high volumes a very powerful amplifier can overdrive your
speakers and damage them. And if the amplifier is not powerful enough, it can produce distortion
that can easily damage your speaker. (Consult your dealer for assistance.)
DON’T BE FOOLED BY THE VOLUME CONTROL. It only adjusts how loud, it is not an
indication of power output. If your speakers begin to sound harsh or grating or if you hear other forms
of distortion, turn down the volume immediately!
Avoid use of tone controls and loudness controls as they will demand even more power from
an amplifier, lowering the volume at which damage could occur.
GoldenEar Invisa SP 652 Manual 3
Amplifier Distortion — #1 Threat to your New Speakers!
Amplifier distortion is the principal cause of speaker damage. When listening at loud levels your amplifier may run
out of clean power. It will then begin to produce speaker-damaging distorted power. This will damage any brand
of speaker very quickly! More powerful amplifiers are actually safer — For example: A 40 Watt/channel amplifier
will have substantial distortion above 40 Watts. If driven to 50 Watts, this amplifier will deliver speaker-damaging
distorted power! But a 100 Watt/channel amplifier will have very low distortion below 100 Watts. Therefore, when
the speaker requires 50 Watts, this more powerful amplifier will deliver clean power and speaker damage is less
likely to occur. (See your GoldenEar dealer for amplifier recommendations.)
Do not be fooled by the Volume setting of your system. It only adjusts listening level — it is not a “power-output” dial.
The amount of amplier power actually used at a given Volume setting depends solely on the nature of the source
material you are listening to (at a given Volume setting a quiet section of music will use less amplier power than
a loud section). With typical material, the rated output power of many receivers/ampliers is often reached when
the Volume is set to around -10dB, or between the “11” and “1 o’clock” settings with an analog control (with bass/
treble and loudness controls not used — otherwise rated power may be reached at even lower Volume settings).
Remember, all ampliers produce distortion when operated beyond their rated output power. The resulting
distortion will damage all speakers! If you listen at loud levels, be careful to listen for the point of audible distortion —
if the speakers begin to sound distressed, turn the Volume down or your speakers and/or amplier(s) will be
damaged! This type of damage constitutes abuse and is not covered by the warranty. If louder volumes are
desired, consider a more powerful amplier.
There is Actually a Limit!
Even with these safer, more powerful amplifiers, there is a point at which you could have more power than the
speaker can handle. At that point you will overpower the speaker and damage it. At loud levels do not increase
bass/treble controls from zero and ensure that all loudness/contour/bass EQ buttons are off (otherwise rated
output power will be reached at even lower volume control settings).
The Right Amount of Power
A power-range rating is given in the specifications as a guide to indicate the approximate minimum and
maximum power input of your GoldenEar Invisa® speakers. Amplifiers that meet or even exceed the speaker’s
power-range rating are recommended as their greater power reserves provide better sound. But always use the
speakers within their power-range rating to prevent damage — that is, keep listening levels below the point of
obvious audible distortion.
Setting Bass and Treble Controls on Receiver or Amplifier
Normally we recommend that you set the “Bass” and “Treble” controls on flat (or off, or 0 dB). Same applies for a
graphic equalizer; we recommend that you leave it flat (or off). This will give you the most accurate and natural
sound. If you want more bass, raise your subwoofer’s “Level” control (or raise the subwoofer level on you’re a/v
receiver), keeping in mind that even a little turn of the knob can make a big difference in the sound. The reason
for this recommendation is that we have discovered what is often thought to be improper sounding speakers
is, in fact, a problem caused by the use of tone controls. When in doubt, leave them out (flat); this almost always
results in the best possible and most natural sounding system performance.
Volume Setting

Termékspecifikációk

Márka: GoldenEar Technology
Kategória: Speaker
Modell: Invisa SP 652

Szüksége van segítségre?

Ha segítségre van szüksége GoldenEar Technology Invisa SP 652, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Speaker GoldenEar Technology

GoldenEar Technology

GoldenEar Technology T66 Útmutató

26 Augusztus 2024
GoldenEar Technology

GoldenEar Technology Invisa HTR 7000 Útmutató

12 Augusztus 2024
GoldenEar Technology

GoldenEar Technology Invisa SP 652 Útmutató

11 Augusztus 2024
GoldenEar Technology

GoldenEar Technology Triton Two+ Útmutató

10 Augusztus 2024
GoldenEar Technology

GoldenEar Technology Invisa 600 Útmutató

8 Augusztus 2024

Útmutatók Speaker

Legújabb útmutatók Speaker

Sonance

Sonance Visual Performance VP65 SST Útmutató

16 Október 2024
Bowers & Wilkins

Bowers & Wilkins CWM664 Útmutató

16 Október 2024
Teufel

Teufel Rockster Air Útmutató

15 Október 2024
Trust

Trust GXT 628 Útmutató

15 Október 2024
Alpine

Alpine PSS-22WRA Útmutató

15 Október 2024
Sharp

Sharp PS-932 Útmutató

15 Október 2024
Bauhn

Bauhn APPS-0724 Útmutató

15 Október 2024
Aiwa

Aiwa SP-A100 Útmutató

15 Október 2024
Harman Kardon

Harman Kardon Citation One Útmutató

14 Október 2024
Alpine

Alpine 30MC Útmutató

14 Október 2024