Használati útmutató Eureka Opal SRS4 Insert
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Eureka Opal SRS4 Insert (6 oldal) a Heater kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/6
Operation & Installation Instruction
Opal SRS4 Insert
Please keep these instrution for future reference.Rev B231311
Opal SRS4 Insert 12
A.F. Gason Pty Ltd reserves the right to modify or alter specications, material etc. in the intrest of product improvement
WARRANTY
1. Subjects to clauses 2 & 3 of this warranty, A.F. Gason Pty Ltd ACN 004 667 556 (Gason warrants the follow components of its heaters against defects in workmanship
and/or materials for the following periods from the date of purchase:
a) the rebox for ten years;
b) the paint nish for a period of twelve months if the purchaser has followed the instruction provided by Gason in the Operati on and Installation Instructions manual; and
c) all other components for twelve months execpt the glass, re brick lining or bae plate if, in the opinion of Gason, these items have been damaged by impact.
2. This exte nded warranty does not apply;
a) if the heater is purchased from a person who has not been authorised by Gason to sell its products;
b) if, in the opinion of Gason, the heater or any other component has been subject to abuse, misuse, alteration, modication or has not been installed, operated or maintained in
accordance with the instructions provided by Ga son; or,
c) to owners other then the original purchaser.
3. If you believe that the heater you purchased contains a manufacturing defect and you wish to make a claim under this warranty, please contact an authorised Gason servi ce
centre to arrange for an assessment.
4. If, after assessing the heater, Gason determines that the heater contains a manufacturing fault, Gason may at its discretion:
a) re place the heater;
b) repair or replace specic components of the heater; or
c) provide a full refund.
5. Parts replaced under warranty are warranted for the balance of their original warranty period.
6. If, at the discretion of Gason, the heater or any part needs to be replaced, serviced or repaired at an authorised Gason service centre, then the person claiming under this
Warranty must pay all costs associated w ith:
a) returning the heater; and
b) the delivery or collection of any new or repaired heater.
Our goods come with guarantees that cannot be excluded under the Austrlian Consumer Law. You are entilted to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or repla ced if the goods fail to be of acceptable quality
and the failure does not amount to a major failure.
Any benets you receive under these warranties are in addition to other rights and remedies that you may have as a consumer under a law in relation to the heater to which
these warranties relate.
These warranties are given by:
A.F. Gason Pty Ltd
Blake Street
Ararat VIC 3377
Please contact us if y ou have any queries on:
Phone: 03 53522151
or email us via the “Contact Us” section of our website: www.gason.com.au
•Smoke entering the room from the rebox when the door is open may be caused by
•Insucient length of ue (Flue to be 4500mm minimum underneath the base of heater to
underside of cowl)
Increase height of ue
•Flue downdraught
Consult dealer or increase height of ue.
•Creosote buildup in ue
Remove cowl and clean ue as per cleaning instructions. Check moisture content of wood.
•Excessive ash build up
some woods will give large amounts of ash despite how you run the h eater. Others will give you very little.
Use the wood which is most convenient for you as long as it is dry. After a period of time you will get to
know when to empty your unit. Bark will give you excessive ash. Try not to burn it.
If you are burning wood that gives you charcoal, you may nd that after running the heater say for 8 hours
at maximum burn rate, the charcoal builds up excessively. Overnight burn will reduce this charcoal back to
a ne ash. If you are not ready to shut down for overnight burn when you next fuel the stove, load the
stove with only one piece of wood and lay it across the rebox on top of the charcoal. Open the air control
wide open and you will nd the charcoal will burn down with the one piece of wood. Repeat the process
until the ash level is signicantly reduced.
Troubleshooting (Continued)
Opal SRS4 Insert 2 Opal SRS4 Insert 11
T
Read and follow these instructions carefully before installing and
u
sing this appliance
S
AVE THESE INSTRUCTIONS
WARNING
!
WARNING
!
Safety Warnings
•
A ue re with resulting damage may occur if the appliance is not installed,
operated and maintained as per this booklet.
• Never place combustible materials such as wood, paper or furniture near the
appliance.
• This appliance is designed to burn dry wood. Do not burn rubbish, driftwood,
flammable liquids or any substance containing salts or corrosives.
• This appliance must not be installed and operated in an area where kerosene,
petrol, paint thinner or other ammable liquid is used or stored.
• The ue system must be inspected and cleaned annually or sooner if required.
Failure to do so could result in an excessive buildup of creosote which may
result in a ue re which may damage the ue or cause damage to your home.
• The surface of the appliance becomes hot during operation. Do not touch the
surface of this appliance. Keep children away from this appliance during
operation. Do not allow anyone to operate this appliance who is not familiar
with this instruction booklet.
WARNING
!
Paint curing and care
Your heater is coated with the best available heat resistant paint. Even though
t
he paint has been baked after application, it may require further temperature
c
uring. It may, if you overre the heater on its rst re, discolour. For your rst
t
wo or three rings, never exceed medium air setting and always have the fan
o
n when above low burn. Do not wipe the heater while the paint is curing. After
t
he paint has cured the only maintenance required to maintain the heaters nish
i
s to wipe it with a soft cloth. Do not use any commercial cleaners or solvents on
t
he paint nish.
W
e are proud of the presentation of our products. If at any time you need to
f
reshen up the paint, your local dealer has touchup paint available for purchase.
Y
ou may even change the colour of your heater if you wish.
If you have any enquiries, please contact the dealer from whom you purchased your heater:
P
LEASE COMPLETE:
D
ealer Name
D
ealer Address
Phone:
P
lease attach your original purchase dockets to this booklet for future reference.
Troubleshooting
• isy FanNo
Turn the power o and remove the three pin plug from the power point .
Remove the four screws that hold the front fan access panel . . Remove the panel
Disconnect the wiring loom via the plastic joine r. .Unscrew the nut which holds the fan in position and remove the fan
Clean any dust with dry paint brush and acuum the fan blade Clean around the moto a v s. r. After completion place tw o
or three drops of sewing machine oil on the shafts at the bearing Replace the fan in reverse to the remo al s. v .
• F an not workin g
Check the power connection with another applianc If the power point is e. O.K assume the. Fan or the Switch is
defectiv Isolate the power as abov Check that the terminals on the loom and the switch are rmly connected If the. e. . e
fan then fails to function , awayremove the fan and switch by rstly removing the knob o the fan switch by pulling it
from the heate r. . eUndo the holding nut and pull the switch out Disconnect the wiring from the power lead and remov
the fan and switch . e.Convey the same to the authorised Eureka Dealer from whom you purchased your unit for servic
Replace in the reverse orde r.
• rAir Cont ol ammin J g
Lift up o e. and rem ve top plat
Rem ve airo co knntrol ob by tur ing anti-clockwi n s Lift ol out the way.e. air contr panel of
Th ng the ace. Un ve the a e. ere are three bolts holdi air slide in pl do them and remo ir slid Wipe any h yas or dust that ma
have accumul ted a on a sthe back of the ir lide or on the face the heate of r. v on the eIf any burrs have de eloped back of th
air lide or s on f of r, o a ve a andthe ace the heate rub them with ne wet nd dry sand paper till you ha smooth surface
edges. a ke wa aRepl ce the air slide and ma sure the shers and sp cers re a on w othe bolts hen you screw the bolts back int
the ace of the f heater. a of nt s whDo not apply ny type lubrica to the air lide atsoever as th a ke theis will attract dust nd ma
slide stick .
• iNo Overn ght Bur n
Remove the air slide as per air control jamming and check that the air slide is hard against the face of the heate r. isIf it
loos tighten up the bolts holding the air slidee, to the face of the heate r. .Do not overtighten
Check that the door rope has an even indentation from the sealing stri which is on the p, face of the rebox . nIf it is uneve
and it appears as though air could leak through the seal , adjust the thickness of the door rope to suit . toStretch the rope
make it thinner where the indentation is the heaviest and bunch up the excess where the indentation is smalle r.
Check the four bolts that hold the glass retainer in position . . .If loose tighten Do not overtighten
The door may become loose through the door seal shrinking . To tighten the doo r, ofopen the door and look at the inside
the door shaft . UnscrewAllen key screw in door handle shaft . Rotate door handle shaft anti-clockwise when facing heater
(1 turn = 1 . . millimetre) Close door and lock Open door and check door for even indentation from sealing stri Repea p. t
process if required . Replace Allen key screw (check to ensure that roll pin is central in shaft.)
When closing the door you should now feel rm resistance when the latch comes into contact with the catch .
WARNING
!
Overring
NEVER OPERATE THE HEATER WITH THE DOOR LOOSE AND DO NOT AIR TIGHT
OVERFIRING COULD RESULT IN DETRIMENTAL WEAR AND TEAR ON THE
FIREBOX.
Opal SRS4 Insert 10 Opal SRS4 Insert 3
Installation
WARNING
!
Installation THE INS TALLATION OF THIS APPLIANCE MUST BE CARRIED OUT AS PER THIS
MANUAL AND THE FLUE MANU FACTURERS SPECIFIC ATIONS.
WE RECOMMEND TH AT YOU USE A QUALIFIED INS TALLER TO RY TCAR OU
THE INS TALLATION.
If you have any other enquirie please contact the dealer from whom yo s, u
purchased your heate r.
THIS APPLIANCE WEIGHS IN EXCESS OF 120 KILOGRAM S. EEXTREME CAR
SHOULD BE TAKEN WHEN HANDLING THE APPLIANCE.
This heater is to be installed into a masonry replace or a Eureka ZCV
Clearance cabinet.
Section showing Installation
Figure 1. Masonry Installation
WARNING
!
Brick Removal
IF BRICKS REQUIRE REMOVAL WHEN PREPARING THE FIREPLACE, ENSURE
THAT YOU DO NOT EXPOSE COMBUSTIBLE MATERIALS BEHIND THE
BRICKWORK OR WEAKEN THE INTEGRAL STRUCTURE OF THE CHIMNEY.
All dimensions used in this document are in millimeters and are minimum
u
nless otherwise stated. Under no circumstances can these dimensions be
r
educed.
A
F Gason Pty Ltd accepts no liability whatsoever for any interpretation of
A
S/NZS 2918:2001
I
nstallation Permit
D
epending on your local authority requirements, a permit may be required for
t
he installation of your heater. It is your responsibility to arrange the same.
I
nstallation into existing or masonry replace
T
he Eureka Opal Insert can be installed into a masonry replace with a ue
s
ystem that is in accordance with the relevant sections of AS/NZS 2198:2001. No
c
ombustible or heat sensitive material may be placed closer than 1040mm from
t
he top of the hearth/base of appliance and 50mm either side of the appliance’s
f
ascia.
M
inimum hearth depth of 530mm from the front of the fascia panel must be
a
chieved. If it is desired to reduce the hearth depth to the minimum allowable
3
00mm in front of appliance fascia, the appliance must be raised to a new
h
eight - refer elevated installation instructions on page 7.
F
or detailed mantle clearance dimensions, refer Figure 4.
Operating your Eureka (Continued)
Cleaning eyour u
Carefully e ba and to s e. oremov e plate put it one id Cl se the r. a 150heater doo Obtain mm ue brush from your loca l
Eurek Dealera and oproceed up nto yo ur roof. the wl. o sh uRemove co Sl wly pu the ue br sh down the chimney until it
stop the sh at o you do nos. Pull bru back out and repe the pr cess. Each time this you will tice that the brush will go furthe r
down ch hes the bothe imney till it reac ttom. The s wsoot and creo ote ill fall do wn . nthe chimney and into the rebox Clea
re ids ue om x. a the e. ke su u job . The efr rebo Repl ce bae plat Ma re yo do the well cleaner the ue the less chance ther
will be of the s n. ycre oteos ticking agai After ou ha , inve replaced the cowl spect the roo ashing for any damage tha f t
may have bee inc n urred hilst w you were cleaning the e. the of w ifu Reseal the seal on ro ith roof and gutter silicone
required.
The fa n
It is recommended to ru n the ng abo on s . Ffan while the heater is operati ve low burn low peed or extended periods whe n
the heater is aboru ingnn ve medium r e, ohigh or bo st is recommended . B w aoost is recommended for short bursts here
quick temperat ure ri se n nis desired in co ju ction w h a s . The n o a s.it high re etting fa sh uld be cleaned on regular basi
( TRefer ro blesho tiu o ng n val afor fa remo nd cleaning. )
WARNING
!
Operation of the fan
If rebox failure is reported and it is found that the rebox has been abuse d
through improper use of the fan Eureka reserve the right to disallow an , y
w e.arranty claims in relation to rebox failur
WARNING
!
The Door
Leaving Door Ope n
As stated previously in relation to leaving door open 25mm to encourage the r e
to pick up at faster rat a e. Your heater has been tested to ensure that no
structural damage can ta ke . rplace if the door is inadvertently left open Howeve
your paint nish can be damaged if the door is left open for long period with a a
full rebox of fuel with the fan o. isClosely supervise your heater while the door
left open .
Closing the Doo r
Al ays ensure that before you close your door there is no wood protrudinw g
beyond the front of the rebox opening . a gDo not use the door glass as ’batterin
ram’ to push the wood back into the rebox Damage to the glass by suc . h
impact is not covered by your arrant w y.
Overnight nbur
Appr ximatelo y n30 mi utes before tur ning the nheater down to over ight burn it is hrecommended to load the heater wit
f for nuel the over ight burn . the ol the to h . the Leave air contr in medium hig position Let heater run yfor about thirt
min teu s. This will reduce the moi sture content in the fuel before sh ut . (Tdown his will help reduce the creosote formatio n
in the rebox nd u a e.) Set the air control to the etting s you have fo st f Tund be or your requirements. urn the fan o an d
retire. The n ovaim whe ernight burning is to ha ve a hot s boonly few ember left in the ttom of the rebox in the morning .
Not huge lumps of wo .od
Termékspecifikációk
Márka: | Eureka |
Kategória: | Heater |
Modell: | Opal SRS4 Insert |
Szüksége van segítségre?
Ha segítségre van szüksége Eureka Opal SRS4 Insert, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Heater Eureka
19 Augusztus 2024
19 Augusztus 2024
19 Augusztus 2024
8 Augusztus 2024
Útmutatók Heater
- Heater Mestic
- Heater Electrolux
- Heater Nedis
- Heater Parkside
- Heater Candy
- Heater Philips
- Heater Gorenje
- Heater Adler
- Heater Princess
- Heater SilverCrest
- Heater Bosch
- Heater NewAir
- Heater MPM
- Heater AEG
- Heater Emerio
- Heater Einhell
- Heater Bartscher
- Heater Maxwell
- Heater Hyundai
- Heater Scarlett
- Heater Tefal
- Heater HQ
- Heater Emos
- Heater Corbero
- Heater Camry
- Heater Xiaomi
- Heater Danby
- Heater DeLonghi
- Heater Heinner
- Heater Infiniton
- Heater Sunbeam
- Heater Beurer
- Heater Trumatic
- Heater Wilfa
- Heater Klarstein
- Heater VOX
- Heater Scheppach
- Heater Vivax
- Heater Conceptronic
- Heater Thomson
- Heater Fagor
- Heater Unold
- Heater SHX
- Heater Brentwood
- Heater Ardes
- Heater Cuisinart
- Heater Eden
- Heater Eurolite
- Heater Jocel
- Heater Bimar
- Heater Clatronic
- Heater Bomann
- Heater Bauknecht
- Heater Dyson
- Heater Ambiano
- Heater Cecotec
- Heater Sencor
- Heater Pelgrim
- Heater Qlima
- Heater Baxi
- Heater Innoliving
- Heater Rowenta
- Heater Güde
- Heater Izzy
- Heater JANDY
- Heater GoldAir
- Heater Domo
- Heater Russell Hobbs
- Heater Caso
- Heater Carson
- Heater Create
- Heater Mora
- Heater Black & Decker
- Heater Enders
- Heater Orbegozo
- Heater Livoo
- Heater Eberle
- Heater ARGO
- Heater Guzzanti
- Heater Concept
- Heater DCS
- Heater DEDRA
- Heater SVAN
- Heater Nobo
- Heater TriStar
- Heater Suntec
- Heater BaseTech
- Heater RYOBI
- Heater Fantini Cosmi
- Heater Chauvet
- Heater Midea
- Heater Steba
- Heater Heller
- Heater Kogan
- Heater Honeywell
- Heater Broan
- Heater Mesko
- Heater Velleman
- Heater Dimplex
- Heater Master
- Heater Kenmore
- Heater Thermex
- Heater Hayward
- Heater Tesy
- Heater Trotec
- Heater Blaupunkt
- Heater AstralPool
- Heater Korona
- Heater Stadler Form
- Heater Taurus
- Heater Signature
- Heater AFK
- Heater Everdure
- Heater DeWalt
- Heater Kalorik
- Heater Waldbeck
- Heater Alpina
- Heater Philco
- Heater Brandson
- Heater ECG
- Heater Stanley
- Heater Rotel
- Heater Vemer
- Heater Ufesa
- Heater Vonroc
- Heater Rinnai
- Heater Cotech
- Heater Argoclima
- Heater Ausclimate
- Heater WAGAN
- Heater Beper
- Heater Bestron
- Heater Orion
- Heater Soler & Palau
- Heater SereneLife
- Heater Ravanson
- Heater Haeger
- Heater Olimpia Splendid
- Heater Orava
- Heater Eurom
- Heater Mill
- Heater Maestro
- Heater Sogo
- Heater Sonnenkönig
- Heater Fluval
- Heater Lifesmart
- Heater Flama
- Heater Tectro
- Heater Fenix
- Heater Zibro
- Heater Quigg
- Heater Calor
- Heater Sinbo
- Heater Swan
- Heater Anslut
- Heater EWT
- Heater Mellerware
- Heater Nestor Martin
- Heater Termozeta
- Heater Eldom
- Heater Cresta
- Heater Bionaire
- Heater Maginon
- Heater Otsein-Hoover
- Heater Profile
- Heater Ferroli
- Heater Real Flame
- Heater Evolar
- Heater Perel
- Heater Zibro Kamin
- Heater Proline
- Heater Royal Sovereign
- Heater King
- Heater Piazzetta
- Heater Heylo
- Heater Kent
- Heater Arnold Rak
- Heater Wamsler
- Heater Duux
- Heater Imetec
- Heater Alpatec
- Heater Blaze
- Heater Primo
- Heater Creda
- Heater Plieger
- Heater Reer
- Heater Zehnder
- Heater Essentiel B
- Heater Prime3
- Heater Blumfeldt
- Heater CaterChef
- Heater Kambrook
- Heater Zephir
- Heater Harvia
- Heater Brixton
- Heater Superior
- Heater Kunft
- Heater La Nordica
- Heater Jotul
- Heater Vasco
- Heater Noveen
- Heater Nectre
- Heater Cadel
- Heater Grunkel
- Heater Jaga
- Heater Masport
- Heater REMKO
- Heater Extraflame
- Heater Lynx
- Heater Just Fire
- Heater Optimum
- Heater Hartig And Helling
- Heater Gutfels
- Heater Westfalia
- Heater Veito
- Heater Ecoteck
- Heater Etherma
- Heater Nordic Fire
- Heater Haas+Sohn
- Heater Wanders
- Heater Grandhall
- Heater Emga
- Heater Heatstrip
- Heater Escea
- Heater Braemar
- Heater Bromic Heating
- Heater Martec
- Heater Jindara
- Heater Hatco
- Heater SunRed
- Heater Aerian
- Heater IXL
- Heater XPower
- Heater True North
- Heater WestBend
- Heater Hortus
- Heater Prem-i-air
- Heater Quadra-Fire
- Heater VIESTA
- Heater Apricus
- Heater Brivis
- Heater Hubbell
- Heater HeatStar
- Heater Pacific Energy
- Heater Dri Eaz
- Heater Regency
- Heater Burley
- Heater Kaden
- Heater Jarden
- Heater Noirot
- Heater Ouellet
- Heater Wulfe
- Heater Duro Pro
- Heater Herschel
- Heater HyCell
- Heater TURBRO
- Heater Radialight
- Heater Rowi
- Heater Neopower
- Heater Arlec
- Heater Guardian
- Heater Big Ass Fans
- Heater Pureheat
- Heater EvoHeat
- Heater Bromic
- Heater MSW
- Heater Solamagic
- Heater Contura
- Heater Mirpol
- Heater Alkari
- Heater Longvie
- Heater Blue Rhino
- Heater Rheem
- Heater Gasmate
- Heater Ionmax
- Heater Airo
- Heater Mission Air
- Heater Omega Altise
- Heater Scandia
- Heater Vasner
- Heater Fire Sense
- Heater InfraNomic
- Heater Heat Storm
- Heater Excelair
- Heater Heatscope
- Heater Heat1
- Heater Thermotec
- Heater Perfect Aire
- Heater AustWood
- Heater Uniprodo
Legújabb útmutatók Heater
16 Október 2024
15 Október 2024
15 Október 2024
15 Október 2024
15 Október 2024
15 Október 2024
15 Október 2024
15 Október 2024
15 Október 2024
15 Október 2024