Használati útmutató Dremel 761

Dremel Csavaros gép 761

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Dremel 761 (52 oldal) a Csavaros gép kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/52
Model 761 Pet Nail Grooming Tool
Owner’s Manual
•Safety
• Assembly
•Operation
•Accessory Information
•Warranty
• Service Parts
2 610 925 737 2/05 PRINTED IN U.S.A.
Parlez-vous français?
Voir page 18
¿Habla español?
Vea página 35
Dremel brand products are manufactured and sold by the
Dremel Division of Robert Bosch Tool Corporation
P.O. Box 1468
Racine, Wisconsin 53401
1-800-437-3635
http://www.dremel.com
General Safety Rules for All Battery Operated Tools
Read and understand all instructions. Failure to follow all instructions listed below, may
result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
!
WARNING
Work Area
Keep your work area clean and well lit. Cluttered
benches and dark areas invite accidents.
Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable liq-
uids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
Keep bystanders, children, and visitors away
while operating a power tool. Distractions can
cause you to lose control.
Personal Safety
Stay alert, watch what you are doing, and use
common sense when operating a power tool. Do
not use tool while tired or under the influence of
drugs, alcohol, or medication. A moment of inat-
tention while operating power tools may result in
serious personal injury.
Dress properly. Do not wear loose clothing or jew-
elry. Contain long hair. Keep your hair, clothing,
and gloves away from moving parts. Loose
clothes, jewelry, or long hair can be caught in mov-
ing parts.
Avoid accidental starting. Be sure switch is in the
locked or off position before inserting battery
pack. Carrying tools with your finger on the switch
or inserting the battery pack into a tool with the
switch on invites accidents.
Page 2
When using electrical appliances, especially when children are present, basic safety precautions should
always be followed, including the following:
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING
KEEP AWAY FROM WATER
DANGER – To reduce the risk of electrocution:
1. Do not place or store appliance where it can fall
or be pulled into a tub or sink.
2. Do not use while bathing.
3. Do not place in or drop into water or other liq-
uid.
4. Do not reach for an appliance that has fallen into
water.
WARNING – To reduce the risk of injury to persons:
1. Close supervision is necessary when the appli-
ance is used by, on, or near children or invalids.
2. Use this appliance only for its intended use as
described in this manual. Do not use
attachments not recommended by the manufac-
turer.
3. Never operate this appliance if it is not working
properly, if it has been dropped or damaged, or if
it has been dropped into water. Return the appli-
ance to a service center for examination and repair.
SAVE THESE INSTRUCTIONS
Page 3
Remove adjusting keys or wrenches before turning
the tool on. A wrench or a key that is left attached to
a rotating part of the tool may result in personal
injury.
Do not overreach. Keep proper footing and bal-
ance at all times. Proper footing and balance enable
better control of the tool in unexpected situations.
Use safety equipment. Always wear eye protec-
tion. Dust mask must be used for appropriate con-
ditions.
Tool Use and Care
Do not force tool. Use the correct tool for your
application. The correct tool will do the job better
and safer at the rate for which it is designed.
Do not use tool if switch does not turn it on or off.
A tool that cannot be controlled with the switch is
dangerous and must be repaired.
Disconnect battery pack from tool or place the
switch in the locked or off position before making
any adjustments, changing accessories, or storing
the tool. Such preventive safety measures reduce
the risk of starting the tool accidentally.
Store idle tools out of reach of children and other
untrained persons. Tools are dangerous in the
hands of untrained users.
When battery pack is not in use, keep it away from
other metal objects like: paper clips, coins, keys,
nails, screws, or other small metal objects that
can make a connection from one terminal to
another. Shorting the battery terminals together
may cause sparks, burns, or a fire.
Maintain tools with care. Keep cutting tools sharp
and clean. Properly maintained tools with sharp
cutting edge are less likely to bind and are easier to
control.
Check for misalignment or binding of moving
parts, breakage of parts, and any other condition
that may affect the tool's operation. If damaged,
have the tool serviced before using. Many acci-
dents are caused by poorly maintained tools.
Use only accessories that are recommended by
the manufacturer for your model. Accessories that
may be suitable for one tool may create a risk of
injury when used on another tool.
Service
Tool service must be performed only by qualified
repair personnel. Service or maintenance per-
formed by unqualified personnel may result in a risk
of injury.
When servicing a tool, use only identical replace-
ment parts. Follow instructions in the
Maintenance section of this manual. Use of unau-
thorized parts or failure to follow Maintenance
Instructions may create a risk of shock or injury.
Safety Rules for Cordless Rotary Tools
Accessories must be rated for at least the speed
recommended on the tool warning label. Other
accessories running over rated speed can fly apart
and cause injury.
Hold tool by insulated gripping surfaces when per-
forming an operation where the cutting tool may
contact hidden wiring. Contact with a "live" wire will
make exposed metal parts of the tool "live" and shock
the operator. If cutting into existing walls or other
blind areas where electrical wiring may exist is
unavoidable, disconnect all fuses or circuit breakers
feeding this worksite.
Before changing accessories remove battery pack.
Accidental starting may occur because battery tools
with a battery inserted are in the operative condition.
Be aware of the switch location, when placing the
tool down or when picking the tool up. You may
accidentally activate the switch.

Termékspecifikációk

Márka: Dremel
Kategória: Csavaros gép
Modell: 761

Szüksége van segítségre?

Ha segítségre van szüksége Dremel 761, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Csavaros gép Dremel

Dremel

Dremel 256T6 Útmutató

22 Augusztus 2024
Dremel

Dremel 400 XPR Útmutató

12 Augusztus 2024
Dremel

Dremel 300 Series Útmutató

11 Augusztus 2024
Dremel

Dremel 764 Útmutató

26 Július 2024
Dremel

Dremel 750 Útmutató

26 Július 2024
Dremel

Dremel 398 Útmutató

26 Július 2024
Dremel

Dremel 276T6 Útmutató

26 Július 2024
Dremel

Dremel 761 Útmutató

26 Július 2024
Dremel

Dremel 760 Útmutató

26 Július 2024

Útmutatók Csavaros gép

Legújabb útmutatók Csavaros gép

Metabo

Metabo SE 2800 Útmutató

13 Január 2025
RYOBI

RYOBI One+ R18IW3 Útmutató

12 Január 2025
Hazet

Hazet 9012EL-SPC Útmutató

12 Január 2025
MSW

MSW -ACW700 Útmutató

11 Január 2025
RYOBI

RYOBI PCL250 Útmutató

5 Január 2025
RYOBI

RYOBI PCL212 Útmutató

5 Január 2025
Hazet

Hazet 9022 P-2 Útmutató

31 December 2025
Milwaukee

Milwaukee M18 BDD Útmutató

30 December 2025
Milwaukee

Milwaukee M12 BDD Útmutató

30 December 2025
Netter Vibration

Netter Vibration PKL 740 Útmutató

29 December 2024