Használati útmutató Crunch CRW12D4

Crunch mélynyomó CRW12D4

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Crunch CRW12D4 (3 oldal) a mélynyomó kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/3
Sealed enclosures offer a range of performance
proles depending on the internal air volume.
Larger enclosures will have a smoother more
extended response while a small enclosure
will have increased output in a more focused
frequency range. Sealed enclosures are the
simplest to construct but do require that the box
be completely air tight.
Vented designs offer the ability to tune the
enclosure. Larger enclosures will have a
smoother more extended response while a
small enclosure will have increased output
in a more focused frequency range. Vented
enclosures are more difcult to construct but
offer more overall output.
• Use 3/4” MDF
• Make sure the woofer mounting panel is
full width and height
• Glue all mating surfaces
• Use wood screws
• Use silicone caulk on all internal joints
The internal volume of the
enclosure must be determined
to insure proper performance.
Simply measure height, width and
depth of enclosure you intend
to build. Subtract the material
thickness. Multiply these numbers
and divide by 1728 to get the
volume in cubic feet.
For enclosures with an angled
panel, measure the larger and
smaller depths, add these
together and divide by two. Use
this averaged depth.
Enclosure
Volume
D
H x W x D
1728
D1 + D2
2
Sealed
Vented
Enclosure types
Volume calculation
Subwoofer dimensions
CAUTION
Always consider consulting a professional audio installer
before installing new subwoofers. High power audio
systems have the ability create sound levels above 130dB.
Extended exposure to high sound pressure levels can
cause hearing damage.
Always run any new wiring through safe areas that wont
interfere with the normal operation of the vehicle.
Congratulations on your choice of a Crunch subwoofer.
This “Quick Start Installation” guide is meant to help you
“hook up” and play music. For more detailed information
on system setting, speaker and subwoofer conguration,
and full specications by model, visit the website at
Crunchcaraudio.com
It’s a good idea to conrm that you have purchased the
correct size subwoofers to t your vehicle. If you have any
reservations about being able to complete the installation
yourself, we recommend contacting a professional. Be careful
as you go. Always disconnect the negative battery terminal
before starting any electrical work on the vehicle.
CRW12D4
Height 14"
Width 20.16"
Depth 14"
Vb 1.5 cu ft
F3 43 Hz
Qtc 1.151
CRW12D4
Height 14"
Width 21.1"
Depth 14"
VH (Vent Height) 14"
VW (Vent Width) 0.59"
VL (Vent Length) 12.99"
VA (Vent Area) 31.25 A(in^2)
Vb (Box Volume ) 1.5 cu ft
F3 38 Hz
Fb 38 Hz
Before you start
Sealed
Vented
Recommended enclosures
Enclosure construction
in(mm) A B C D
CRW12D4 12.25”(311) 5.61”(142.5) 10.94”(142.5) 5.25”(134)
A
B
D
C
Quick Start
Installa ion uide
WARRANTY
Maxxsonics USA Inc. warrants this product, to the original consumer purchaser, to be free from
defects in material and workmanship for a period of one (1) year from the date of purchase.
Maxxsonics USA Inc. will, at it’s discretion, repair or replace defective products during the warranty
period. Components that prove to be defective in materials and workmanship under proper installation
and use must be returned to the original authorized Maxxsonics USA Inc. retailer from where it was
purchased. A photocopy of the original receipt must accompany the product being returned. The
costs associated with removal, re-installation and freight are not the responsibility of Maxxsonics
USA Inc. This warranty is limited to defective parts and specically excludes any incidental or
consequential damages connected therewith. To view the full warranty, please visit the website.
Hifonics products are designed and engineered in the USA by
www.maxxsonics.com CR CRW QSG 01 - rev1
A Low pass lter will allow only
the bass frequencies to reach the
woofer making for a more natural
transition to the higher frequency
drivers. Check your amplier’s
manual for details.
We recommend using an
electronic subsonic lter. This will
help to protect the woofer from
extreme low frequency distortion.
Many ampliers are equipped
with this type lter. Check your
amplier’s manual for details.
This subwoofer is equipped with
quick disconnect type terminals.
Use crimp type terminals or solder
the wire directly to the terminals.
Depending on the number of woofers you intend to use,
you can congure the wiring to provide the best impedance
load for your system. Below are some examples. Consult
your amplier’s manual for recommendations.
Low Pass (LPF)
Subsonic
4Ohm DVC Congurations
Connections
Crossovers
Wiring
4 4
82.7
4 4
4 4
4 4
4 4
4 4
4 4
4 4
2
4 4
2
10Hz 100Hz 1000Hz
10Hz 100Hz 1000Hz
CRW12D4

Termékspecifikációk

Márka: Crunch
Kategória: mélynyomó
Modell: CRW12D4

Szüksége van segítségre?

Ha segítségre van szüksége Crunch CRW12D4, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók mélynyomó Crunch

Crunch

Crunch CRW12D4 Útmutató

11 Augusztus 2024
Crunch

Crunch GP820 Útmutató

17 Május 2024

Útmutatók mélynyomó

Legújabb útmutatók mélynyomó

Phase Technology

Phase Technology IW200-II Útmutató

4 Április 2025
Wet Sounds

Wet Sounds ZERO 10 S4 XZ-W Útmutató

2 Április 2025
SoundTube

SoundTube CM1001D Útmutató

2 Április 2025
JL Audio

JL Audio FS108-W5 Útmutató

31 Március 2025
Phase Technology

Phase Technology PL-12p Útmutató

30 Március 2025
ETON

ETON Graphit 8-2 Útmutató

19 Március 2025
ETON

ETON Graphit 8-4 Útmutató

19 Március 2025
ETON

ETON Graphit 10-4 Útmutató

19 Március 2025
ETON

ETON MW 10 FLAT Útmutató

19 Március 2025
ETON

ETON PW 8 Útmutató

19 Március 2025