Használati útmutató Chief HB010R

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Chief HB010R (2 oldal) a Projektor tartozék kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/2
8803-000005 06/04/07
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: chief@chiefmfg.com
HB-010R
V P C M IDEO ROJECTOR EILING OUNT
FOR RUNCO VX-1000C D C, VX1000CI, VX-1000 ,VX-2 ,
XV-4000CI, VX VX VX VX-4000D, -5000C, -5000CI, -5000D,
The Chief HB010R video projector ceiling mount is designed to provide fast, simple and secure installation of the
Runco VX-1000c, . Special roll, pitch, yaw and horizontal adjustments simplify projection positioning for image
alignment. The HB010R mount also has positive registration lock so that the projector may be removed without
losing projector mount registration.
WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL
INJURY! All components must be securely fastened to each other and to the ceiling, AND
the ceiling MUST be capable of supporting 5 times the total weight of the installation. If it
cannot, the ceiling MUST be reinforced.
Unpack and check contents:
(1) Deluxe ceiling mount housing assembly. (6) #10 washers, flat
(1) Runco mounting bracket (6) 10 - 32 x 3/8” Screws, PH, Phillips
(4) 5/16” Flange Nuts (6) 10 - 32 x 2” Screws, PH, Phillips
(6) Nylon Spacer .50” OD X .26”ID X 1.625 TL
INSTALLATION INSTRUCTIONS
1. Turn your projector upside down.
2. Place the (6) Nylon Spacers over the six threaded inserts in the bottom of the projector .
3. Place the Runco mounting bracket on the six nylon spacers on the bottom of the projector so the hooks are
facing the back and the six holes in the bracket line up the six threaded inserts in the bottom of the projector.
4. Slide the (12) #10 washers, two on each (6) 10-32 x 2” Screw and install them into the six threaded inserts in
the projector. Securely tighten all six mounting screws at this time.
5. Be sure that the method of support you are using for the VCM ceiling mount is securely installed to the
ceiling. If not, the ceiling must be reinforced. Improper installation may result in serious personal injury.
6. Attach the VCM housing to your method of support and tighten firmly so the VCM housing is square to the
screen.
PRECAUTION: Installing a ceiling mount requires the presence of two persons familiar with
mechanical installations. A third assistant is recommended.
6. With the help of your assistants, lift the projector and install it to the four studs extending from the mounting
plate. Be sure the Runco mounting plate is seated in slots. Tighten securely using the (4) 5/16” flange nuts.
For projector alignment see attached sheet.

Termékspecifikációk

Márka: Chief
Kategória: Projektor tartozék
Modell: HB010R

Szüksége van segítségre?

Ha segítségre van szüksége Chief HB010R, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Projektor tartozék Chief

Chief

Chief RPMC198 Útmutató

1 Január 2025
Chief

Chief RPMA360 Útmutató

1 Január 2025
Chief

Chief RSMA342 Útmutató

1 Január 2025
Chief

Chief RSMA360 Útmutató

1 Január 2025
Chief

Chief RPMC266 Útmutató

1 Január 2025
Chief

Chief RSMC360 Útmutató

1 Január 2025
Chief

Chief RPMA303 Útmutató

1 Január 2025
Chief

Chief RPMC246 Útmutató

1 Január 2025
Chief

Chief RSA000S Útmutató

1 Január 2025
Chief

Chief RSA360 Útmutató

1 Január 2025

Útmutatók Projektor tartozék

Legújabb útmutatók Projektor tartozék