Használati útmutató Chief CMS380
Chief
Projektor tartozék
CMS380
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Chief CMS380 (8 oldal) a Projektor tartozék kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/8
I N S T A L L A T I O N I N S T R U C T I O N S
Truss Ceiling Adapter Accessory
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
CMS380
CMS380 Installation Instructions
2
DISCLAIMER
Milestone AV Technologies and its affiliated corporations and
subsidiaries (collectively “Milestone”), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.
Chief® is a registered trademark of Milestone AV Technologies.
All rights reserved.
DEFINITIONS
MOUNTING SYSTEM: A MOUNTING SYSTEM is the
primary Chief product to which an accessory and/or component
is attached.
ACCESSORY: AN ACCESSORY is the secondary Chief
product which is attached to a primary Chief product, and may
have a component attached or setting on it.
COMPONENT: A COMPONENT is an audiovisual item
designed to be attached or resting on an accessory or mounting
system such as a video camera, CPU, screen, display,
projector, etc.
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all accessories are
properly assembled and installed using the instructions
provided.
WARNING: Failure to provide adequate structural strength
for this accessory can result in serious personal injury or
damage to equipment! It is the installer’s responsibility to
make sure the structure to which this accessory is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
accessory.
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components located within the mounting system of the
CMS380 does not exceed 500 lbs (226.8 kg).
•The weight capacity of the CMS380 may be LIMITED
to the lowest weight capacity of any other component
or accessory used within the mounting system.
WARNING: Use this accessory only for its intended use as
described in these instructions. Do not use attachments not
recommended by the manufacturer.
WARNING: Never operate this accessory if it is damaged.
Return the accessory to a service center for examination and
repair.
WARNING: The CMS380 accessory is to be used vertically
ONLY! Do NOT install accessory to pipe or truss horizontally.
WARNING: Do not use this accessory outdoors.
NOTE: Accessory is intended to be used with the UL Listed
CPA Extension Column Series (not included).
IMPORTANT ! : The CMS380 accessory is designed for
installation to a steel supporting truss or pipe with an
outside diameter between 1.75" (44.45mm) and 2.0"
(50.8mm).
IMPORTANT ! : The CMS380 accessory is intended to
be used with the UL listed CMS Pipe Series and a 1-1/2"
NPT or NPSM following ANSI/ASME B1.20.1 (Schedule
40, 0.154" minimum thickness steel or aluminum-ASTM
B221) threaded extension column (not included).
--SAVE THESE INSTRUCTIONS--
Installation Instructions CMS380
3
DIMENSIONS
2.38
60.3
Termékspecifikációk
| Márka: | Chief |
| Kategória: | Projektor tartozék |
| Modell: | CMS380 |
Szüksége van segítségre?
Ha segítségre van szüksége Chief CMS380, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Projektor tartozék Chief
1 Január 2025
1 Január 2025
1 Január 2025
1 Január 2025
1 Január 2025
1 Január 2025
1 Január 2025
1 Január 2025
1 Január 2025
1 Január 2025
Útmutatók Projektor tartozék
- Projektor tartozék Sony
- Projektor tartozék Nedis
- Projektor tartozék Panasonic
- Projektor tartozék Casio
- Projektor tartozék BenQ
- Projektor tartozék My Wall
- Projektor tartozék V7
- Projektor tartozék Kanto
- Projektor tartozék Roadinger
- Projektor tartozék Optoma
- Projektor tartozék Omnitronic
- Projektor tartozék Viewsonic
- Projektor tartozék Konig & Meyer
- Projektor tartozék Sanus
- Projektor tartozék Manhattan
- Projektor tartozék Peerless-AV
- Projektor tartozék Chipolino
- Projektor tartozék Sanyo
- Projektor tartozék Lindy
- Projektor tartozék Barco
- Projektor tartozék NEC
- Projektor tartozék Projecta
- Projektor tartozék Gabor
- Projektor tartozék Speaka
- Projektor tartozék Newstar
- Projektor tartozék Vogel's
- Projektor tartozék Vision
- Projektor tartozék Da-Lite
- Projektor tartozék AV:link
- Projektor tartozék InFocus
- Projektor tartozék Metronic
- Projektor tartozék Peerless
- Projektor tartozék Tempest
- Projektor tartozék Premier Mounts
- Projektor tartozék Elite Screens
- Projektor tartozék Kingpin Screens
- Projektor tartozék Christie
- Projektor tartozék Unicol
- Projektor tartozék Smart Media
- Projektor tartozék NeoMounts
- Projektor tartozék SMK-Link
Legújabb útmutatók Projektor tartozék
27 Március 2025
27 Március 2025
14 Január 2025
10 Január 2025
7 Január 2025
27 December 2024
27 December 2024
23 December 2024
23 December 2024
23 December 2024