Használati útmutató Bogen NEAR S5T

Bogen hangszóró NEAR S5T

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Bogen NEAR S5T (4 oldal) a hangszóró kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/4
Description
Features
• High sensitivity and exceptional power handling
• Two models: S5 for 8 ohms; S5T for 70V & 8 ohms
• 150W at 8 ohms (S5 & S5T)
• 70V Power settings: 32, 16, 8, 4, 2, 1 watts (S5T Only)
• Hemispherical mounting system makes it simple to
mount, aim, and lock-in position of loudspeaker
• 5-1/4” metal-alloy MDTTM mid/bass speaker cone is
extremely stable in all environments
• Patented MLSTM Ferrofluid voice coil centering replaces
distortion-causing mechanical spider and seals
magnet gap
• Professional Grade 1-1/2” diameter woofer voice coil
provides higher output level and ultra-low distortion
• 1” horn-loaded titanium high frequency driver delivers
clear, articulate response and consistent long-term
performance
• Wide, even coverage over listening area
• High-density, injection-molded cabinet provides an
exceptional cosmetic finish
• Low-resonance cabinet structure
• Precisely designed low-frequency tuning for proper
balance
• Advanced polymer compound cone surrounds resist UV
rays, chemicals, and salt spray
• Aluminum-alloy & Titanium cones, UV-protected ABS
cabinets, and powder-coated aluminum grilles and
mounting brackets assure long-term cosmetic
and sonic durability
• Pressure clamping input terminals for quick installation
The S5 & S5T compact, versatile speakers feature NEARʼs unique
driver technologies to produce the highest sound quality in the most
durable and reliable loudspeakers available. Precise sound repro-
duction is achieved with mid/bass drivers employing NEARʼs MDTTM
and patented MLS
TM technologies for superior sound and long-term
durability. The high-frequency driver is a 1” titanium diaphragm
which perfectly complements the metal-alloy LF driver. A built-in
32W transformer (S5T) makes it compatible with 70V sound
systems. The S5T speaker can switch between 70V or low-imped-
ance systems by using a power tap selection switch. NEARʼs
patented spiderless technology (MLS
TM) and advanced materials
deliver out-of-the-box performance year after year.
Unique MDT™ (Metal Diaphragm Technology):
• High rigidity and low mass of metal versus traditional papers
and plastics (extremely stable cone structure over long
periods of time)
• Fast transmission of sound through the diaphragm means
low energy storage
• Special anodizing process creates a ceramic coating for
increased stiffness
• Efficient heat-sinking of voice coils under long-term,
high-power situations
•Speaker diaphragms are manufactured with materials that
will not be altered by constant exposure to UV rays or water,
cold or heat, or extremely high or low humidity
Patented MLS™ (Magnetic Liquid Suspension):
• Voice coil is constantly centered for lower distortion
• Voice coil is more efficiently heat-sinked by fluid instead of air
• Greater linearity is accomplished because the mechanical
spider is eliminated
• Constant lubrication of the gap prevents oxidation from
humid environments
High-Performance
Foreground Loudspeakers
Models S5/S5T
Specifications subject to change without notice.
© 2010 Bogen Communications, Inc.
54-8023-50B 1010
Technical
Specifications
The loudspeaker shall be NEAR Model S5 or S5T with
a power handling capacity of 150 watts @ 8 ohms, or
32W @ 70V input (S5T), or approved equivalent. The
loudspeaker shall consist of one 5-1/4 inch metal-alloy
low-frequency diaphragm transducer and one horn-
loaded 1-inch titanium high-frequency diaphragm
transducer. A crossover network provides dividing and
smoothing of frequencies between the transducers.
A mathematically-aligned and vented molded enclosure
shall house all components. High-density ABS cabinet
material and powder-coated aluminum grille material will
assure long-term cosmetic stability.
The high-frequency driver shall utilize a rigid titanium
diaphragm and integral compounded rubber surround
for proper damping and long-term reliability.
The low-frequency driver shall utilize a metal-alloy
diaphragm with deep-anodized surface treatment for
rigidity and corrosion resistance. The cone shall provide
a heat transfer thermal path for the voice coil under
high-power inputs. Compounded rubber cone surrounds
shall be formulated to provide a high degree of damping
and long-term performance without decay.
The voice coil will be centered via a high gauss, low
viscosity magnetic fluid (Ferrofluid), which increases
the heat transfer efficiency from the voice coil to the
speakerʼs mechanical structure under long-term high-
power use. The magnetic fluid shall provide corrosion
resistance in the magnet gap.
The mounting bracket provided with the speaker shall
be designed to provide angular movement horizontally
and vertically to facilitate proper directional coverage. It
shall allow both vertical and horizontal orientation of the
loudspeaker. The bracket shall be formed from cast
metal-alloys with a scratch-resistant, powder-coated
finish. The input connectors for 8-ohm and 70V systems
shall be via a positive pressure-clamping device to facil-
itate connection of the speaker input wires.
Dimensions of the speaker shall not exceed 6-7/8” W x
9-3/4” H x 6-1/8” D without the bracket attached;
or, 6-7/8” W x 9-3/4” H x 8-1/8” D with the bracket
attached. Weight shall not exceed 8 lbs. for the S5,
or 9 lbs. for the S5T.
Architect & Engineer
Specifications
Models S5/S5T
Frequency Response (-10dB)*: 48 Hz to 17 kHz
Low-Frequency Design – Metal-Composite Cone
5-1/4” Nominal Dia.
Utilizing MLS Voice Coil Guidance System
High-Frequency Driver – Titanium Cone: 1” Horn-Loaded
Sensitivity (1W/1m, Avg. 100 Hz - 15 kHz): 89dB SPL
Dispersion
Horizontal:
130 Degrees
Vertical:
110 Degrees
Impedance Ratings
Low:
8Ω Only (S5 version)
High:
70V and 8Ω (S5T version)
Power Input (Maximum) 150W@ 8 ohms
Additional Taps: 32, 16, 8, 4, 2, 1 watts
Product Weight: S5: 8 lbs. / S5T: 9 lbs.
Speaker Dimensions (WxHxD)
Without Bracket:
6-7/8” H x 9-3/4” H x 6-1/8” D
With Bracket:
6-7/8” H x 9-3/4” H x 8-1/8” D
Enclosure Material: ABS
Product Color: White (“W” suffix) and Black (“B” suffix)
Mounting Bracket Material: Aluminum Alloy, Powder-Coated Finish
Grille Material: Perforated Aluminum, Powder-Coated Finish
Terminations: Pressure Clamp
Included Accessories: Color-Matched Mounting Bracket
Optional Accessories: Safety Cable CK10
*Half-Space Response
Horizontal
Polar
Response
Vertical
Polar
Response
Frequency
Curves
Response
-6-12-18-24-30-36 0
30
60
90
120
150
180
210
240
270
300
330
500 Hz
1000 Hz
2000 Hz
4000 Hz
8000 Hz
16000 Hz
0
30
60
90
120
150
180
210
240
270
300
330
-6-12-18-24-30-36
20 100 1K 10K200 500 2K 5K 20K (Hz)
(dBspl)
70
80
90
100
110
Half Space @ 1m
2W
4W
8W
8 Ω / 1W
16W
32W
-6
-12
-18
-24
-30
-36
0
30
60
90
120
150
180
210
240
270
300
330
500 Hz
1000 Hz
2000 Hz
4000 Hz
8000 Hz
16000 Hz
-6
-12
-18
-24
-30
-36
0
30
60
90
120
150
180
210
240
270
300
330
TOP
TOP
TOP TOP
TOP

Termékspecifikációk

Márka: Bogen
Kategória: hangszóró
Modell: NEAR S5T

Szüksége van segítségre?

Ha segítségre van szüksége Bogen NEAR S5T, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók hangszóró Bogen

Bogen

Bogen WMT1AS Útmutató

11 December 2024
Bogen

Bogen AE-2s2 Útmutató

29 Szeptember 2024
Bogen

Bogen NEAR S5T Útmutató

23 Szeptember 2024
Bogen

Bogen G8G Útmutató

20 Szeptember 2024
Bogen

Bogen R8 Útmutató

18 Szeptember 2024
Bogen

Bogen MPS1 Útmutató

18 Szeptember 2024
Bogen

Bogen OCS1 Útmutató

18 Szeptember 2024
Bogen

Bogen AFI-8 Útmutató

14 Szeptember 2024
Bogen

Bogen NQ-SMS1810-SCG Útmutató

30 Augusztus 2024
Bogen

Bogen CSD1X2 Útmutató

26 Augusztus 2024

Útmutatók hangszóró

Legújabb útmutatók hangszóró

Phonic

Phonic AURRAS 8A Útmutató

11 December 2024
Phonic

Phonic ACUMEN 8A Útmutató

11 December 2024
Phonic

Phonic ACUMEN 6A Útmutató

11 December 2024
Phonic

Phonic AURRAS 6A Útmutató

11 December 2024
MB

MB PESSPROVS61A Útmutató

11 December 2024
Ruark Audio

Ruark Audio Sabre-R Útmutató

11 December 2024
Antelope

Antelope R4S Útmutató

11 December 2024
Antelope

Antelope Atlas i8 Útmutató

11 December 2024
MB

MB PESSPROVS62A Útmutató

11 December 2024
MB

MB PESSPROVS32A Útmutató

11 December 2024