Használati útmutató Blaupunkt GBW101

Blaupunkt mélynyomó GBW101

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Blaupunkt GBW101 (2 oldal) a mélynyomó kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/2

Dear Customer,

Congratulations on your purchase of a BLAUPUNKT subwoofer, we are devoted to making our

musical reproduction the very best, and we are pleased you have chosen our product.

Through years of engineering expertise, hand craftsmanship, and critical testing procedures,

we have created a wide range of products that reproduce music with all the clarity and

richness you deserve.

For maximum performance we recommend you have your BLAUPUNKT product installed by

an authorized BLAUPUNKT dealer, as they have the knowledge, skills that will maximize the

performance of your subwoofer. Please read this manual, keep your receipt, and original

carton for possible future use.

If after reading this manual, you still have questions regarding your product, we recommend

that you see your nearest BLAUPUNKT dealer,

GBW801/101/120

SUBWOOFER

INSTRUCTION MANUAL

WARNING

Continuous, excessive exposure to sound pressure levels in excess of 85dB

can cause hearing loss. While BLAUPUNKT sound systems are capable of

producing sound pressure levels greater than 85dB, they are also designed

for enjoyment at reasonable levels. Please observe all local sound ordinances

while listening to your BLAUPUNKT sound system.

Need we say more! Use common sense.

Mounting:

NOTE: BLAUPUNKT strongly recommends that you operate your system at low

volume levels prior to the completed installation of your BLAUPUNKT subwoofers.

This will allow for a test of the subwoofers before securing it to its permanent

location.

CAUTION: Make sure that all subwoofers wiring is fully protected from cuts, tears

and possible wear. Any short circuits developing as a result could severely damage

the source unit or possible an ampliﬁer. Make sure all subwoofers wires easily

reach the subwoofers terminal with no stress on the wire or connectors.

IMPORTANT: Never cut any metal that is an integral part of the vehicles safety or

structural support system. Again, If you are unsure, it is best to have the subwoof

ers professionally installed. It could be a lot less expensive in the long run. Never

sacriﬁce your safety for sound.

CHOOSING A LOCATION: It is always best to plan the complete installation prior to

attempting to install any product. The routing of wires, power connections and

mounting locations should be planned ﬁrst. As with any car stereo installation, all

work performance should be checked thoroughly and carefully prior to the opera

tion of the system.

The placement of your BLAUPUNKT subwoofers within your vehicle will greatly

a ect the overall performance of your audio system. Every model of car is di er

ent, so installation into particular locations of the vehicle may not be possible

without modiﬁcations. Factory provided locations are usually.

BLAUPUNKT subwoofers are designed to ﬁt in almost any factory location. Again, if

at all possible, it is recommended that you use a factory location. This applies

mostly to later model cars. For those earlier models that do not have factory

locations or are limited to just front subwoofer, it is recommended that you choose

a loca nt amount of air space.

If you allo nt amount of air space, the subwoofer may not produce

low frequencies very well. It is recommended to mount the subwoofer in the door

panels, kick panels, rear decks, etc. Ideally, the subwoofer should be mounted

where it will be in an enclosed airspace. This will allow for extended bass response.

Troubleshooting:

If you start having problems with distorted sound or loss performance after

installing your subs, you can follow the instructions below to try and locate what is

causing the problem.

1). If you have any distorted sound, loss of performance, or rattling from your subs,

check the connections running from your ampliﬁer or other processor to the box.

You will also want to check the connections inside the box to make sure no wires

have become unhooked or are loose.

2). If the above does not solve the problem, check your enclosure thoroughly to

see if there are any leaks, cracks, or broken pieces. Any loss of structural integrity of

your enclosure can cause signiﬁcant performance loss and distortion.

3). The next step you can take is to remove the subs and look for any burned wire

leads or separated components. You can normally smell something burning when

a sub blows or is going bad. Sometimes when you play subs to hard for too long,

they will start to heat up.

4). If none of the above steps solve the problem, you will want to start looking at

the other components in the vehicle. Start by checking all connections to and

from the box, ampliﬁer, source unit, or any other processors you may be using. You

will need to reference to that particular manufacturer for any setting conﬁgura-

tions or troubleshooting.

Warning:

Investigate the layout of your automobile thoroughly before drill or cutting any

holes. Take care when you work near the gas tanks, gas lines, hydraulic lines, and

electrical wiring. Attach the system securely to the automobile to prevent damage,

particularly in the event of an accident. Do not mount the system so that the wire

connections are unprotected or are subject to pinching or damage from nearby

objects.

The +12V DC power wire must be fused at the battery positive terminal connec-

tion. Before making or breaking power connections at the system power terminals,

disconnect the +12V wire at the battery end. Confrm your radio/head unit or other

equipment is tur connectiong the input jacks and subwoofer termi-

nals.

If you need to replace the power fuse, replace it only with a fuse identical to that

supplied with the system. Using a fuse of di erent type or rating may result in

damage to this system.

Contents

Dimensions............................................................. 3

Features.................................................................... 4

Speciﬁcations......................................................... 4

Mounting................................................................. 5

Troubleshooting................................................... 6

Warning................................................................... 6

Front Cover Back Cover Page 1 Page 2

Page 2

Page 4 Page 5

Page 6

GBW801

GBW101

GBW120

Model GBW801 GBW101 GBW120

Fo (Hz) 46 36.2 32

Re (Ohms) 3.2 3.2 3.2

Qts 0.406 0.49 0.502

Qes 0.457 0.55 0.597

Qms 3.638 4.96 3.175

Cms (u M/N) 149.822 198.27 106.085

Vas (Ltr) 13.762 33.1 38.638

Mms (g) 44.7 97.6 130.5

Mmd (g) 42.4 93.9 124

No (%) 0.51 0.278 0.367

SPL (dB-1W/1M) 88 88 88

BL (TxM) 9.5 11.4 11.87

Krm (uOhms) 729.1 1367 1592

Erm 1.024 0.998 0.984

Kxm (mH) 26.7 31.8 33

Frequency Response (Hz) 45Hz~2KHz 35Hz~2KHz 32Hz~2KHz

Voice Coil (Diameter) 1.5" 2" 2"

Magnet Weight 32.2oz 47.8oz 47.8oz

Power Rating (RMS) 200Watts 300Watts 400Watts

Power Rating (Peak) 400Watts 600Watts 800Watts

Dimension:

Speciﬁcations:

High Quality Polypropylene Cone

High Density Foam Surround

High Temperature Aluminium Voice Coil

High Performance Strontium Ferrite Magnet

FCC Rules. Operation is subject to the following two conditions: (1) this device may

not cause harmful interference, and (2) this device must a ept any interference cc

received, including interference that my cause undesired operation. WARNING: This

product contains a chemical known to the State of California to cause cancer and

reproductive toxicity.

Mounting Depth: 5.08”

Overall Depth: 5.75”

Hole Diameter:

Ø0.157”

Model: GBW801

Model: GBW101

Model: GBW120

Page 3

Bolt Hole

Circle: Ø7.8”

Hole Diameter:

Ø0.197”

Bolt Hole

Circle: Ø9.76”

Hole Diameter:

Ø0.197”

Bolt Hole

Circle: Ø11.57”

Overall Diameter: Ø8.43”

Overall Diameter: Ø10.71”

Overall Diameter: Ø12.48”

Mounting Hole Diameter: Ø7.09”

Mounting Hole Diameter: Ø9.21”

Mounting Hole Diameter: Ø11.06”

Mounting Depth: 5.63”

Overall Depth: 6.42”

Mounting Depth: 3.74”

Overall Depth: 4.33”

Termékspecifikációk

Márka:	Blaupunkt
Kategória:	mélynyomó
Modell:	GBW101

Szüksége van segítségre?

Ha segítségre van szüksége Blaupunkt GBW101, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók mélynyomó Blaupunkt

Blaupunkt GBW801 Útmutató

7 Október 2024

Blaupunkt GBW101 Útmutató

2 Október 2024

Blaupunkt GTr 100 A Útmutató

23 Szeptember 2024

Blaupunkt XLf 180 A Útmutató

14 Szeptember 2024

Blaupunkt XLc 200 A Útmutató

3 Augusztus 2024

Blaupunkt XLf 150 A Útmutató

31 Július 2024

Blaupunkt GTr 110 A Útmutató

30 Július 2024

Blaupunkt TW 1600.4 Útmutató

30 Július 2024

Blaupunkt Txt 1500.4 Útmutató

19 Július 2024

Blaupunkt GTr 130 A Útmutató

17 Július 2024

Útmutatók mélynyomó

Legújabb útmutatók mélynyomó

Phase Technology IW200-II Útmutató

4 Április 2025

Wet Sounds ZERO 10 S4 XZ-W Útmutató

2 Április 2025

SoundTube CM1001D Útmutató

2 Április 2025

JL Audio FS108-W5 Útmutató

31 Március 2025

Phase Technology PL-12p Útmutató

30 Március 2025

ETON Graphit 8-2 Útmutató

19 Március 2025

ETON Graphit 8-4 Útmutató

19 Március 2025

ETON Graphit 10-4 Útmutató

19 Március 2025

ETON MW 10 FLAT Útmutató

19 Március 2025

ETON PW 8 Útmutató

19 Március 2025