Használati útmutató BeamZ Skytec 151.725
BeamZ
effekt gép
Skytec 151.725
Olvassa el alább 📖 a magyar nyelvű használati útmutatót BeamZ Skytec 151.725 (16 oldal) a effekt gép kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/16
DISCO SET I II
151.725 / 151.727
Instruction Manual
Gebruiksaanwijzing
Mode d’Emploi
Gebrauchsanleitung
Brugsanvisning
GB
GENERAL SAFETY RECOMMENDATIONS
- Please read this manual prior to using the unit.
- Keep the manual for further reference.
- Keep the original packaging to ensure safe transport of the unit.
- For indoor use only in dry premises.
- Ensure that there is sufficient cooling around the unit.
- Do not use the unit near heat sources or in direct sunlight.
- If the plug or mains lead are damaged, they need to be repaired by a qualified technician.
- If the unit is damaged to an extent that you can see internal parts, do not plug the unit into a
- mains outlet.
- Make sure that no small objects or liquids enter the housing.
- Clean the unit only with a damp cloth. Do not use detergents or solvents!
- Other than those specified in the manual, . the unit doesn’t contain any user serviceable parts
- Repairs should only be carried out by an authorized SkyTronic repair service.
- FIRE HAZARD: install the mirror ball and motor at least 0.5m away from inflammable materials
(e.g. decoration objects, etc.)
- DANGER: Prior to first using the mirror ball motor combination, the installation must be check –ed
by a specialist.
- The mounted units need to be checked regularly and at least once a year by a specialist.
- Regularly check the chain between the motor and the mirror ball including the anchorage points in
the motor and the ball.
- Use strong materials for the mounting of the motor.
General Description
The complete Disco lighting set includes:
- Mirror ball (20cm for the set ref. no. 151.725 30cm for the set ref. no.151.727) ,
- Mirror ball motor
- PAR36 spot light with colour wheel
MIRROR BALL MOTOR
INSTALLATION:
NOTE: Follow the instructions carefully and use your brains when mounting the motor and mirror ball.
A falling mirror ball can cause serious injuries!!
- The installation must be done in such a way that it can support 10 times the weight of the
mirror ball for at least 1 hour without showing any distortion.
- The motor needs to be installed perfectly horizontally. Check the position with a level. The
battery-powered version can be hung vertically.
- Motor and mirror ball must be installed out of the reach of persons.
- Use all screw openings in the housing.
- Use a chain of sufficient strength for the installation of the mirror ball below the motor. The
supplied chains are made to the load of the motor.
- Connect the assembly to an earthed wall outlet.
MIRROR BALL
INSTALLATION IN PRIVATE PREMISES
- WARNING: A falling mirror ball can cause serious injuries!
- A mirror ball is meant to create decorative light effects in combination with an appropriate light
source.
- ATTENTION!! Mirror balls need to be installed by a professional according to the European
standard EN60598.
- The installation that supports the mirror ball (including the motor) needs to be able to carry
during 1 hour 5 times the weight of the mirror ball without showing visible distortion.
- Use a chain of sufficient strength to link the motor to the mirror ball. Do not use steel cable
that might fray due to the torsion.
- Big mirror balls need to be secured by a safety net.
- The mounted motor and mirror ball assembly needs to be checked regularly, and at least once
a year by a professional.
- Check regularly the chain between the motor and the mirror ball, including the fixing points on
the motor and the ball.
INSTALLATION IN PUBLIC PREMISES
- WARNING: Mirror balls need to be installed according to the European standard EN60598-2-7
and the standards which are applicable in the different countries. The installation might only
be done by a professional installer!
- The installation that supports the mirror ball (including the motor) needs to be able to carry
during 1 hour 10 times the weight of the mirror ball without showing visible distortion.
- The installation needs to be secured by a safety net so that no parts can fall down.
- IMPORTANT! THE INSTALLATION OF LIGHT EFFECTS REQUIRES EXPERIENCE and
knowledge of load calculations, installation materials, periodic safety checks, etc. Leave the
installation to a professional if you don’t have the required knowledge and experience. A
wrong installation might cause serious injuries and material damages.
- Use a chain of sufficient strength for the link between the motor and the mirror ball. Do not use
steel cable that can fray under the torsion.
- DANGER: Prior to the first use of the motor and mirror ball assembly, the installation needs to
be checked by a professional.
- The motor and mirror ball assembly needs to be checked regularly by a professional.
- Check regularly the chain between the motor and the mirror ball, including the fixing points on
the motor and the mirror ball.
PAR36 SPOT WITH COLOUR WHEEL
Installing/replacing the lamps
Before replacing the lamp, unplug mains lead and let the lamp cool down. Please follow the lamp
manufacturer’s notes when installing.
- You need one 6V 30W Par 36 Lamp for installation.
- Please remove the fixation ring by pressing it together.
- If replacing the lamp, remove the old lamp from the pin s and loosen the wires. pot
- Loosen the screws on the new 6V 30W Par 36 lamp with an appropriate screwdriver.
- Connect the wires with the lamp using an appropriate screwdriver.
- Tighten the screws.
- Insert the lamp in the housing.
- Fix the lamp with the fixation ring.
Termékspecifikációk
| Márka: | BeamZ |
| Kategória: | effekt gép |
| Modell: | Skytec 151.725 |
Szüksége van segítségre?
Ha segítségre van szüksége BeamZ Skytec 151.725, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók effekt gép BeamZ
6 Január 2025
8 Október 2024
2 Október 2024
30 Szeptember 2024
29 Szeptember 2024
27 Szeptember 2024
18 Szeptember 2024
17 Szeptember 2024
17 Szeptember 2024
15 Szeptember 2024
Útmutatók effekt gép
- effekt gép Nedis
- effekt gép TC Electronic
- effekt gép HQ
- effekt gép Boss
- effekt gép Eurolite
- effekt gép Westinghouse
- effekt gép American DJ
- effekt gép NGS
- effekt gép Viking
- effekt gép Behringer
- effekt gép Lotronic
- effekt gép Showtec
- effekt gép Futurelight
- effekt gép Chauvet
- effekt gép Velleman
- effekt gép Monacor
- effekt gép Manta
- effekt gép Konig
- effekt gép Pyle
- effekt gép Cameo
- effekt gép Technical Pro
- effekt gép Martin
- effekt gép HQ Power
- effekt gép Elation
- effekt gép Blizzard
- effekt gép Antari
- effekt gép Valueline
- effekt gép Adj
- effekt gép Rosco
- effekt gép Steren
- effekt gép Valcom
- effekt gép Midas
- effekt gép QTX
- effekt gép Fredenstein
- effekt gép Max
- effekt gép Monoprice
- effekt gép Elysia
- effekt gép Stairville
- effekt gép Black Lion Audio
- effekt gép Laserworld
- effekt gép Drawmer
- effekt gép ColorKey
- effekt gép JB Systems
- effekt gép Evo-Lite
- effekt gép Hazebase
- effekt gép IGS Audio
- effekt gép Sagitter
- effekt gép DJPower
- effekt gép Doepfer
- effekt gép Fun Generation
- effekt gép Karma
- effekt gép IMG Stage Line
- effekt gép Lexicon
- effekt gép The Confetti Maker
- effekt gép Eliminator Lighting
- effekt gép BoomTone DJ
- effekt gép Klark Teknik
- effekt gép Blizzard Lighting
- effekt gép Lab Gruppen
- effekt gép TCM FX
- effekt gép Audibax
- effekt gép Magmatic
- effekt gép Showven
Legújabb útmutatók effekt gép
2 Április 2025
2 Április 2025
2 Április 2025
2 Április 2025
2 Április 2025
2 Április 2025
1 Április 2025
1 Április 2025
1 Április 2025
27 Március 2025