Használati útmutató BeamZ BPP200 151.231
BeamZ
effekt gép
BPP200 151.231
Olvassa el alább 📖 a magyar nyelvű használati útmutatót BeamZ BPP200 151.231 (33 oldal) a effekt gép kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/33
BPP200 P 12x18W 6-1 HEXA IR DMX AR64
Ref. nr.: 151.231
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
GEBRAUCHSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
V1.0
2
ENGLISH
Congratulations to the purchase of this Beamz light eect. Please read this manual thoroughly prior to using the unit in order to
benet fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to
avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.
Keep the manual for future reference.
- Prior to using the unit, please ask advice from a
specialist. When the unit is switched on for the rst time,
some smell may occur. This is normal and will disappear
after a while.
- The unit contains voltage carrying parts. Therefore do
NOT open the housing.
- Do not place metal objects or pour liquids into the unit
This may cause electrical shock and malfunction.
- Do not place the unit near heat sources such as
radiators, etc. Do not place the unit on a vibrating
surface. Do not cover the ventilation holes.
- The unit is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the unit from a mains outlet, always
pull the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the mains lead are damaged, they
need to be replaced by a qualied technician.
- If the unit is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains outlet
and DO NOT switch the unit on. Contact your dealer. Do
NOT connect the unit to a rheostat or dimmer.
- To avoid re and shock hazard, do not expose the unit to
rain and moisture.
- All repairs should be carried out by a qualied technician
only.
- Connect the unit to an earthed mains outlet (220-
240Vac/50Hz) protected by a 10-16A fuse.
- During a thunderstorm or if the unit will not be used for a
longer period of time, unplug it from the mains. The rule
is: Unplug it from the mains when not in use.
- If the unit has not been used for a longer period of time,
condensation may occur. Let the unit reach room
temperature before you switch it on. Never use the unit in
humid rooms or outdoors.
- During operation, the housing becomes very hot. Do not
touch it during operation and immediately after.
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- Secure the unit with an extra safety chain if the unit is
ceiling mount. Use a truss system with clamps. Make
sure nobody stands in the mounting area. Mount the
eect at least 50cm away from inammable material and
leave at least 1 meter space on every side to ensure
sucient cooling.
- This unit contains high intensity LEDs. Do not look into
the LED light to prevent damage to your eyes.
- Do not repeatedly switch the xture on and o. This
shortens the life time.
- Keep the unit out of the reach of children. Do not leave
the unit unattended.
- Do not use cleaning sprays to clean switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice from
a specialist.
- Only operate the unit with clean hands.
- Do not force the controls.
- If the unit has fallen, always have it checked by a
qualied technician before you switch the unit on again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the unit with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the unit o prior to unplugging it from the mains
and/or other equipment. Unplug all leads and cables
prior to moving the unit.
- Make sure that the mains lead cannot be damaged when
people walk on it. Check the mains lead before every use
for damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains
voltage of the country is suitable for this unit.
- Keep the original packing material so that you can
transport the unit in safe conditions
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should
read and adhere to.
DO NOT LOOK DIRECTLY INTO THE LENS. This can damage your eyes. Persons who are subject to epileptic attacks
should be aware of the eects that this light eect may have on them.
The unit has been certied CE. It is prohibited to make any changes to the unit. They would invalidate the CE certicate and
their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and
35 95°C/ °F.
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.
Specications can be changed without prior notice.
3
UNPACKING INSTRUCTION
CAUTION! mediately upon receiving a xture, carefully unpack the carton, check the contents to ensure that all parts are Im
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that a xture must be returned to the factory, it is important that the xture be returned in the original
factory box and packing.
If the device has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched o until it has reached room temperature.
POWERSUPPLY
On the label on the backside of the controller is indicated on this type of power supply must be connected. Check that the mains
voltage corresponds to this, all other voltages than specied, the light eect can be irreparably damaged. The controller must
also be directly connected to the mains and may be used. No dimmer or adjustable power supply.
INSTALLATION
Attention:
The installation of the fixture has to be built and constructed in a way that it can hold 10 times the weight
for 1 hour without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net.
This secondary safety attachment must be constructed in a way that no part of the installation can fall down
if the main attachment fails.
Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging
and servicing.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert before taking into operation for the first time and after changes before taking into operation another
time.
The operator has to make sure that safety-relating and machine-technical installations are approved by a
skilled person once a year.
The xture should be installed in the position where persons cannot reach and where persons may walk by
or be seated.
CAUTION: Please consider the respective national norms
during the installation! The installation must only be
carried out by an authorized employee or dealers!
CAUTION: When installing the device, make sure there is no
highly in inammable material (decoration articles,
etc.) in between a distance of min 0.5 meter.
Termékspecifikációk
| Márka: | BeamZ |
| Kategória: | effekt gép |
| Modell: | BPP200 151.231 |
Szüksége van segítségre?
Ha segítségre van szüksége BeamZ BPP200 151.231, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók effekt gép BeamZ
8 Október 2024
2 Október 2024
30 Szeptember 2024
29 Szeptember 2024
27 Szeptember 2024
18 Szeptember 2024
17 Szeptember 2024
17 Szeptember 2024
15 Szeptember 2024
13 Szeptember 2024
Útmutatók effekt gép
- effekt gép HQ
- effekt gép Eurolite
- effekt gép American DJ
- effekt gép Viking
- effekt gép Behringer
- effekt gép Lotronic
- effekt gép Showtec
- effekt gép Futurelight
- effekt gép Chauvet
- effekt gép Velleman
- effekt gép Monacor
- effekt gép Manta
- effekt gép Konig
- effekt gép Cameo
- effekt gép Technical Pro
- effekt gép Martin
- effekt gép HQ Power
- effekt gép Elation
- effekt gép Blizzard
- effekt gép Antari
- effekt gép Valueline
- effekt gép Adj
- effekt gép Rosco
- effekt gép Steren
- effekt gép Valcom
- effekt gép Midas
- effekt gép QTX
- effekt gép Max
- effekt gép Monoprice
- effekt gép Stairville
- effekt gép Black Lion Audio
- effekt gép Laserworld
- effekt gép Drawmer
- effekt gép ColorKey
- effekt gép JB Systems
- effekt gép Hazebase
- effekt gép Sagitter
- effekt gép DJPower
- effekt gép Doepfer
- effekt gép Fun Generation
- effekt gép Karma
- effekt gép IMG Stage Line
- effekt gép Lexicon
- effekt gép The Confetti Maker
- effekt gép Eliminator Lighting
- effekt gép BoomTone DJ
- effekt gép Klark Teknik
- effekt gép Lab Gruppen
- effekt gép TCM FX
- effekt gép Magmatic
- effekt gép Showven
Legújabb útmutatók effekt gép
5 December 2024
10 Október 2024
6 Október 2024
3 Október 2024
2 Október 2024
24 Szeptember 2024
24 Szeptember 2024
16 Szeptember 2024
16 Szeptember 2024
14 Szeptember 2024