Használati útmutató BeamZ Disco Set 151.250
BeamZ
Effect machine
Disco Set 151.250
Olvassa el alább 📖 a magyar nyelvű használati útmutatót BeamZ Disco Set 151.250 (12 oldal) a Effect machine kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/12
DISCO SET
151.250
Instruction Manual
Gebruiksaanwijzing
Gebrauchsanleitung
GB
GENERAL SAFETY RECOMMENDATIONS
- Please read this manual prior to using the unit.
- Keep the manual for further reference.
- Keep the original packaging to ensure safe transport of the unit.
- For indoor use only in dry premises.
- Ensure that there is sufficient cooling around the unit.
- Do not use the unit near heat sources or in direct sunlight.
- If the plug or mains lead are damaged, they need to be repaired by a qualified technician.
- If the unit is damaged to an extent that you can see internal parts, do not plug the unit into a mains
outlet.
- Make sure that no small objects or liquids enter the housing.
- Clean the unit only with a damp cloth. Do not use detergents or solvents!
- Other than those specified in the manual, . the unit doesn’t contain any user serviceable parts
- Repairs should only be carried out by an authorized Tronios repair service.
- FIRE HAZARD: install the mirror ball and motor at least 0.5m away from inflammable materials (e.g.
decoration objects, etc.)
- DANGER: Prior to first using the mirror ball motor combination, the installation must be check by a –ed
specialist.
- The mounted units need to be checked regularly and at least once a year by a specialist.
- Regularly check the chain between the motor and the mirror ball including the anchorage points in the
motor and the ball.
- Use strong materials for the mounting of the motor.
- AVOID DIRECT EYE EXPOSURE, especially applicable to persons with photo sensitive disorders eg.
Epilepsy.
General Description
The complete Disco lighting set includes:
- Mirror ball 20cm
- Mirror ball motor
- PAR36 spot light with colour wheel
- Flash light
MIRROR BALL MOTOR
INSTALLATION:
NOTE: Follow the instructions carefully and use your brains when mounting the motor and mirror ball. A
falling mirror ball can cause serious injuries!!
- The installation must be done in such a way that it can support 10 times the weight of the mirror ball
for at least 1 hour without showing any distortion.
- The motor needs to be installed perfectly horizontally. Check the position with a level. The battery-
powered version can be hung vertically.
- Motor and mirror ball must be installed out of the reach of persons.
- Use all screw openings in the housing.
- Use a chain of sufficient strength for the installation of the mirror ball below the motor. The supplied
chains are made to the load of the motor.
- Connect the assembly to an earthed wall outlet.
MIRROR BALL
INSTALLATION IN PRIVATE PREMISES
- WARNING: A falling mirror ball can cause serious injuries!
- A mirror ball is meant to create decorative light effects in combination with an appropriate light
source.
- ATTENTION!! Mirror balls need to be installed by a professional according to the European standard
EN60598.
- The installation that supports the mirror ball (including the motor) needs to be able to carry during 1
hour 5 times the weight of the mirror ball without showing visible distortion.
- Use a chain of sufficient strength to link the motor to the mirror ball. Do not use steel cable that might
fray due to the torsion.
- Big mirror balls need to be secured by a safety net.
- The mounted motor and mirror ball assembly needs to be checked regularly, and at least once a
year by a professional.
- Check regularly the chain between the motor and the mirror ball, including the fixing points on the
motor and the ball.
INSTALLATION IN PUBLIC PREMISES
- WARNING: Mirror balls need to be installed according to the European standard EN60598-2-7 and
the standards which are applicable in the different countries. The installation might only be done by a
professional installer!
- The installation that supports the mirror ball (including the motor) needs to be able to carry during 1
hour 10 times the weight of the mirror ball without showing visible distortion.
- The installation needs to be secured by a safety net so that no parts can fall down.
- IMPORTANT! THE INSTALLATION OF LIGHT EFFECTS REQUIRES EXPERIENCE and
knowledge of load calculations, installation materials, periodic safety checks, etc. Leave the
installation to a professional if you don’t have the required knowledge and experience. A wrong
installation might cause serious injuries and material damages.
- Use a chain of sufficient strength for the link between the motor and the mirror ball. Do not use steel
cable that can fray under the torsion.
- DANGER: Prior to the first use of the motor and mirror ball assembly, the installation needs to be
checked by a professional.
- The motor and mirror ball assembly needs to be checked regularly by a professional.
- Check regularly the chain between the motor and the mirror ball, including the fixing points on the
motor and the mirror ball.
PAR36 SPOT WITH COLOUR WHEEL
Installing/replacing the lamps
Before replacing the lamp, unplug mains lead and let the lamp cool down. Please follow the lamp
manufacturer’s notes when installing.
- You need one 6V 30W Par 36 Lamp for installation.
- Please remove the fixation ring by pressing it together.
- If replacing the lamp, remove the old lamp from th pin spot and loosen the wires. e
- Loosen the screws on the new 6V 30W Par 36 lamp with an appropriate screwdriver.
- Connect the wires with the lamp using an appropriate screwdriver.
- Tighten the screws.
- Insert the lamp in the housing.
- Fix the lamp with the fixation ring.
Mounting the Colour Wheel
- Unscrew the nut and the first tooth ring from the fixation axle of the colour wheel motor.
- Remove the foil of the colour wheel.
- Slip the colour wheel onto the fixation axle of the motor
- Slip the tooth ring first and then the nut onto the fixation axle.
- Fasten the nut without damaging the colour wheel.
- Fix the colour wheel with motor via the fixation on the motor to the pin spot housing and tighten the
screw.
Termékspecifikációk
Márka: | BeamZ |
Kategória: | Effect machine |
Modell: | Disco Set 151.250 |
Szüksége van segítségre?
Ha segítségre van szüksége BeamZ Disco Set 151.250, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Effect machine BeamZ
8 Október 2024
2 Október 2024
30 Szeptember 2024
29 Szeptember 2024
27 Szeptember 2024
18 Szeptember 2024
17 Szeptember 2024
17 Szeptember 2024
15 Szeptember 2024
13 Szeptember 2024
Útmutatók Effect machine
- Effect machine HQ
- Effect machine Eurolite
- Effect machine American DJ
- Effect machine Behringer
- Effect machine Showtec
- Effect machine Futurelight
- Effect machine Chauvet
- Effect machine Velleman
- Effect machine Cameo
- Effect machine Technical Pro
- Effect machine Martin
- Effect machine HQ Power
- Effect machine Elation
- Effect machine Blizzard
- Effect machine Antari
- Effect machine Valueline
- Effect machine Adj
- Effect machine Rosco
- Effect machine Steren
- Effect machine Valcom
- Effect machine Midas
- Effect machine QTX
- Effect machine Max
- Effect machine Monoprice
- Effect machine Stairville
- Effect machine Black Lion Audio
- Effect machine Laserworld
- Effect machine Drawmer
- Effect machine ColorKey
- Effect machine DJPower
- Effect machine Karma
- Effect machine IMG Stage Line
- Effect machine Eliminator Lighting
- Effect machine BoomTone DJ
- Effect machine Klark Teknik
- Effect machine Lab Gruppen
- Effect machine TCM FX
- Effect machine Magmatic
- Effect machine Showven
Legújabb útmutatók Effect machine
10 Október 2024
6 Október 2024
3 Október 2024
2 Október 2024
24 Szeptember 2024
24 Szeptember 2024
16 Szeptember 2024
16 Szeptember 2024
14 Szeptember 2024
8 Szeptember 2024