Használati útmutató Bauhn ABP27K-0724

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Bauhn ABP27K-0724 (2 oldal) a Töltő mobil eszközhöz kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/2
Cannot charge
device
Make sure the USB cable is plugged into the output port; unplug the USB cable
and try again.
Try another USB cable and/or USB port.
Some devices require higher outputs to charge. Please check with your devices
spec to conrm compatibility.
The power bank will turn off automatically when an minimum load (about 50mA)
is not detected.
The power bank has built-in temperature protect sensor. Keep the power bank
away from heat, high temperatures and direct sunlight.
Cannot charge
device whilst
charging power
bank
The power bank can not support the output whilst being charged.
Please wait until the power bank is fully charged.
No Digital
Display when
charging device
Connect the power bank to your power source to ensure the power bank has
sufcient battery.
Press the battery status button to check battery status.
Capacity drops It is normal for the capacity to slowly drop after a certain usage cycle.
Product Overview
Have you got everything?
Operation
A. Power Bank
B. USB-C Cable
C. User Guide
D. Warranty Certicate
E. Pouch
Power on/off
Press the power button to turn on the power bank. The LED display will light up and show the
remaining power.
Press and hold the power button to turn off the power bank.
Charging your devices
Connect the supplied USB-C cable or your devices cable to the
relevant port and the other end to your device.
The LED display shows the power remaining as a percentage from
0%-100%.
When the remaining power drops lower than 5%, the LED display
starts blinking to display the low power warning.
When fast charging mode is activated, the indicator will light up
green.
If no devices are being charged, the power bank will turn off after 30
seconds.
When charging multiple devices at same time, the power bank will
exit fast charging mode and it will share charging power to your
connected devices.
A. Power Button
B. USB-A output
C. USB-C input/output
D. Micro USB input
E. LED Display
Battery percentage
Quick charging indicator
Give us a call
What? You mean this User Guide didn’t have ALL the answers? Speak to us!
We’d love to help you get up and running as quickly as possible.
Call our on . After Sales Support 1300 002 534
Operating hours: Monday-Friday, 8:30am-6pm; Saturday, 9am-6pm AEST
Enjoy using your product!
Well done, you made it.
Now sit back and relax... your product is
automatically covered by a 1-year warranty.
How nice!
Troubleshooting
User Guide
Model: ABP27K-0724
27000mAh Power Bank
E A C D
B
C
DE
A
B
Trickle Charging Mode
Double-click the power button to activate trickle charging mode for
charging low-power devices such as smart watches, smart bands and
earbuds. The “%” symbol will ash to indicate this mode.
The power bank will auto turn off the trickle charging mode after
approximately 2 hours.
Press the power button to manually turn off trickle charging mode.
If high-power devices are connected, the power bank will
automatically turn off trickle charging mode.
Charging your power bank
Connect the supplied USB-C cable to the USB-C port of the power bank and the other end to your
power source.
The LED display shows the power remaining as a percentage from 0%-100%.
When the fast charging mode is activated, the indicator will light up green.
When the display indicates 100% the power bank is full.
Please use either USB-C cable (included) or Micro USB cable (not included) for charging the power
bank.
If you connect devices to the power bank while it is charging. Power will be shared and charging time
will be extended.
Note: PD (Power Delivery) is supported via the correct USB-C cables and devices.
If you want to charge your devices to exceed 60W (20V 3A), recommend using USB-C cable with
E-Marker (not included).
USB-A output
USB-C output
General Safety Warnings
GENERAL SAFETY WARNINGS
For the safety of yourself and others, follow all instructions and take notice of all
the warnings. When adhered to, these safety precautions can reduce the risk of
fire, electric shock and injury.
This product complies with Australian Safety standard AS/NZS 62368.1 to ensure
the safety of the product.
The RCM is a visible indication of a products compliance with all
applicable ACMA regulatory arrangements, including all technical and
record-keeping requirements.
IMPORTANT
Plastic wrapping can be a suffocation
hazard for babies and young children, so
ensure all packaging materials are out of
their reach.
To prevent environmental factors
(dampness, dust, food, liquid etc.)
harming the power bank, only use
it in a well-ventilated, clean and dry
environment, away from excessive heat
or moisture.
Keep the product away from direct
sunlight or heat sources.
In case of damage, do not disassemble,
repair or modify the product yourself.
Contact After Sales Support for advice
on repair or replacement, or refer
servicing to qualified personnel only.
Children should be supervised to ensure
they do not play with the product.
Do not put any object on top of the
product.
Do not place or store appliance where it
can fall or be pulled into a bath or sink.
This product is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use
of the product by a person responsible
for their safety.
Do not expose the product to
microwaves.
Clean using a dry cloth only - do not use
water or chemicals.
Keep the product away from oils,
chemicals or any other organic liquids.
Use this appliance only for its intended
purpose as described in this guide.
Responsible disposal of the packaging
The packaging of your product has
been selected from environmentally
friendly materials and can usually be
recycled. Please ensure these are
disposed of correctly. Plastic wrapping
can be a suffocation hazard for babies
and young children, please ensure all
packaging materials are out of reach
and are safely disposed of. Please
recycle these materials rather than
throwing them away.
Responsible disposal of the product
At the end of its working life, do
not throw this product out with your
household rubbish. An environmentally
friendly method of disposal will ensure
that valuable raw materials can be
recycled. Electrical and electronic items
contain materials and substances which,
if handled or disposed of incorrectly,
could potentially be hazardous to the
environment and human health.
CAUTION
The battery in this device is non replaceable.
Input
Micro USB Input: 5V 2A, 9V 2A, 12V 1.5A⎓ ⎓
USB-C Input: 5V 3A, 9V 3A, 12V 3A, 15V 3A, ⎓ ⎓
20V 3.25A (65W Max)
Output
USB-C Output: 5V 3A, 9V 3A, 12V 3A, ⎓ ⎓
15V 3A, 20V 3.25A (65W Max)⎓ ⎓
USB-A Output: 5V 3A, 9V 2A, 10V 2.25A, ⎓ ⎓
12V 1.5A (22.5W Max)
(Total output 15W Max if more than 1 output
use)
Battery Battery: Li-ion 11.1V, 9000mAh, 99.9Wh
Dimensions 180.5 x 80 x 25.5mm
Weight 540g
Specications
* Output is dependent on the mobile device’s input power and the charging cable.
This product may not be allowed on an aircraft, please check with the airline's requirements.

Termékspecifikációk

Márka: Bauhn
Kategória: Töltő mobil eszközhöz
Modell: ABP27K-0724

Szüksége van segítségre?

Ha segítségre van szüksége Bauhn ABP27K-0724, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Töltő mobil eszközhöz Bauhn

Útmutatók Töltő mobil eszközhöz

Legújabb útmutatók Töltő mobil eszközhöz