Használati útmutató B-tech BT9340-FM

B-tech Lapos panel támogatás BT9340-FM

Olvassa el alább 📖 a magyar nyelvű használati útmutatót B-tech BT9340-FM (16 oldal) a Lapos panel támogatás kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/16

BT9340-Rm

DVLED Videowall WALL MOUNT

for rear mounted dvled cabinets

INSTALLATION GUIDE

• Designed for rear mounted DVLED cabinets

• Open frame allows panel access for easy servicing

and maintenance

• Pre-assembly of major parts for quick and easy installation

• All mounting hardware included

• For indoor use only

SPECIFICATIONS

www.btechavmounts.com

B-TECH AV mounts

Please pay careful attention to where this product is located. Check load capacity of the wall prior to installation to ensure

that it can support the combined weight of the equipment and hardware, some surfaces are not suitable for installation.

Warning! Secure to a solid xture, stability can be impaired if attaching to any unsecured surface or furniture.

Designed for indoor use, this mount is suitable for public or home installation. If located in a public or frequently populated

area ensure that the product is out of the immediate reach of people. f any AV equipment is to be suspended over the likely

path or location of people then great care should be taken to secure all parts of the installation from falling.

When drilling holes it is essential to avoid contact with electrical cables and water or gas pipes contained within.

Use of a good quality live wire detector and hidden object locator is therefore recommended.

Only drill into structures when you are sure it is safe to do so.

CONTENTS

Installation Safety Notes......................................................................................................................

Parts List....................................................................................................................................................

Installation Instructions.......................................................................................................................

Product Dimensions............................................................................................................................

B-Tech Contact Details.......................................................................................................................

INSTALLATION & OPERATING SAFETY INSTRUCTIONS

CAUTION:

Do not attempt to install this product until all installation / operating instructions and warnings have

been read and properly understood. Please keep these instructions safe for future reference.

Please check carefully to make sure there are no missing or defective parts - defective parts must never be used.

B-Tech AV Mounts, its distributors and dealers are not liable or responsible for damage or injury caused by improper

installation, improper use or failure to observe these safety instructions. In such cases, all guarantees will expire.

General

B-Tech AV Mounts recommends that a professional AV installer or other suitably qualied person install this product.

Great care must always be taken during installation as most AV equipment is of a fragile nature, possibly heavy and

easily damaged if dropped.

If you do not fully understand the instructions or are not sure how to install this product safely, then please consult a

professional for advice and/or to install this product for you. Failure to mount this product correctly may cause serious

injury or death both during installation and at any time thereafter.

Do not mount any AV equipment that exceeds the specic weight limit of the product you are installing.

This weight limit will be clearly stated on each product and its packaging and will vary from product to product.

Product location

Fixing hardware

It is highly recommended that all xing screws be used where supplied and that the purpose of all other xing hardware

is fully understood. In some cases more AV equipment xing hardware will be supplied to accommodate dierent models

of equipment and set up congurations. The installer must be satised that any supplied xing hardware is suitable for

each specic installation. The xing kit supplied with the product may not be suitable for all walls.

If any xing screws or included hardware are deemed not sucient for a safe installation then please consult a professional

or your local hardware store.

Hazard limitation

Operating & Maintenance

When routing cables take advantage of any built in cable management features that the product might provide and ensure

that all cables are tidy and secure. Check to see that any moving aspect of the product can do so unhindered by any cabling.

Some products have moving parts and the potential to cause injury through the crushing or trapping of ngers or other

body parts.

Particular attention to the nature of moving parts is required especially when assembling installing and adjusting

during set up.

Immediately after installation double-check that the work done is safe and secure. Double-check all

necessary xings are present and are of ample tightness.

It is recommended that periodic inspections of the product and its xing points are made as frequently as possible (no more

than 6 months apart) to ensure that safety is maintained. B-Tech AV Mounts recommends that a suitably qualied person is

used for the removal of this product. Please dispose of the product carefully and with consideration to the environment.

If in doubt consult a professional AV installer or other suitably qualied person.

This mount is intended for use only with the

maximum weights indicated. Use with equipment heavier than the maximum

indicated may result in instability causing possible injury.

BT9340-rm PARTS LIST

PLEASE KEEP THIS FOR FUTURE REFERENCE

Note: Images for reference only as sizes, parts and assembly may dier depending on installation type.

SPACERS

Installation Drawing

Hex Keys

(Assorted)

EXTENSION BARS

INTERFACE PLATE

SPACERS (VARIOUS LENGTHS)

MOUNTING RAIL*

RAIL END CAP

RAIL ASSEMBLY

INTERFACE ASSEMBLY

ITEM PART NAME

A1 ADJUSTABLE WALL PLATE (BT8390-WFK5)

WALL MOUNT ASSEMBLY

M8 x 50mm COACH SCREW

No.10 WALL PLUG*

A2 A3

* For installing If required. (

into brick/concrete walls)

Note: May be supplied with

DVLED cabinet

Cabinet Fixing Screws/Bobbins

CABINET FIXING SCREW/BOBBIN

BT8390-WFK1

PART NAME

ITEM

FIXED WALL PLATE

ST8 x 45mm CSK WOOD SCREW

No.10 WALL PLUG

M8 INSERT NUT

M8 x 12mm CSK HEX SCREW

ALTERNATIVE

WALL PLATE

OPTIONAL

INTERFACE PLATE

EXTENSION KIT

A5A4

*Note: Mounting rails may be supplied in various lengths(item B1)

INSTALLATION DRAWING

TECHNICAL GUIDES

PART NAME

ITEM

CONNECTOR

M8 x 8mm CSK HEX SCREW

M8 x 8mm BUTTON HEAD HEX SCREW

INSTALLATION INSTRUCTIONS

OPTIONAL EXTEND MOUNTING RAILS

Connect together usingitem B1* item B3 and tighten grub screws, combining the rails securely.

Repeat this procedure for all rails.

B1*

BACK FRONT

GRUB

SCREW

GRUB

SCREW

GRUB

SCREW

JOINING

BAR

CHANNEL

BACK FRONT

JOINING BAR ASSEMBLY

FOR BT8390-WFK1

WALL PLATE

JOINING BAR ASSEMBLY

FOR BT8390-WFK5

WALL PLATE

Alternative Wall Plate (BT8390-WFK1)

*Note: Item B1 may be supplied in

dierent lengths. Refer to item D1

for guidance on rail assembly.

FIX MOUNTING RAILS TO THE WALL

INSTALLATION DRAWING

250mm

WALL

i. Use the installation drawing (item D1) to mark and drill the xing holes

for each assembled on item A1 item B1, starting with the bottom rail.

ii. Insert item A2 into the top xing holes, do not fully tighten.

Allow a gap (approx.10mm) to hook on item A1.

WALL

LEVEL

A1 A2

10mm

10mm Masonry bit

iii. Once the bottom rail (item B1) has been hooked on using , screw item A1

item A2 into the bottom xing holes of item A1 and tighten all xings.

Example: Installing with a

BT8390-WFK1 xed wall plate.

Keyhole mounting - Using a Adjustable Depth Wall Plate BT8390-WFK5

*Note: 250mm measurement is for

use with BT8390-WFK5 wall plates.

Termékspecifikációk

Márka:	B-tech
Kategória:	Lapos panel támogatás
Modell:	BT9340-FM

Szüksége van segítségre?

Ha segítségre van szüksége B-tech BT9340-FM, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók Lapos panel támogatás B-tech

B-tech BT9340-FM Útmutató

15 Január 2025

B-tech BTV520 Útmutató

6 Január 2025

B-tech BT9920 Útmutató

21 Szeptember 2024

B-tech BT4001 Útmutató

25 Augusztus 2024

B-tech BT5890-150 Útmutató

25 Augusztus 2024

B-tech BT4003 Útmutató

25 Augusztus 2024

B-tech BT7333 Útmutató

25 Augusztus 2024

B-tech BT7553-100 Útmutató

25 Augusztus 2024

B-tech BT5811-075 Útmutató

25 Augusztus 2024

B-tech BT7384 Útmutató

25 Augusztus 2024

Útmutatók Lapos panel támogatás

Legújabb útmutatók Lapos panel támogatás

Konig KNM-MM20 Útmutató

8 Április 2025

Ergotron Neo-Flex Widescreen Stand Útmutató

3 Április 2025

Ergotron Neo-Flex Cantilever Útmutató

3 Április 2025

Ergotron All-In-One Lift Stand Útmutató

3 Április 2025

Ergotron DS100 Dual Monitor Desk Stand Útmutató

3 Április 2025

Ergotron DS Series DS100 Quad Monitor Desk Stand, Horizontal Útmutató

3 Április 2025

Ergotron LX Series Desk Mount LCD Arm, Tall Pole Útmutató

3 Április 2025

Ergotron LX Series Dual Stacking Arm Útmutató

3 Április 2025

Ergotron 100 Series Double Pivot Útmutató

3 Április 2025

Ergotron Convert-to-LCD & Laptop Kit Útmutató

3 Április 2025