Használati útmutató Axler Robin 05R V2

Axler Háromlábú Robin 05R V2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Axler Robin 05R V2 (2 oldal) a Háromlábú kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/2
www.AxlerSupports.com
ROBIN
PRO 05R V2
ONE-YEAR LIMITED WARRANTY
This Axler product is warranted to the original purchaser to be
free from defects in materials and workmanship under normal
consumer use for a period of one (1) year from the original
purchase date or thirty (30) days after replacement, whichever
occurs later. The warranty provider’s responsibility with
respect to this limited warranty shall be limited solely to repair
or replacement, at the provider’s discretion, of any product
that fails during normal use of this product in its intended
manner and in its intended environment. Inoperability of
the product or part(s) shall be determined by the warranty
provider. If the product has been discontinued, the warranty
provider reserves the right to replace it with a model of
equivalent quality and function.
This warranty does not cover damage or defect caused
by misuse, neglect, accident, alteration, abuse, improper
installation or maintenance. EXCEPT AS PROVIDED
HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY
EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES,
INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. This warranty provides you with specific legal
rights, and you may also have additional rights that vary from
state to state.
To obtain warranty coverage, contact the Axler Customer
Service Department to obtain a return merchandise
authorization (“RMA”) number, and return the defective
product to Axler along with the RMA number and proof
of purchase. Shipment of the defective product is at the
purchaser’s own risk and expense.
For more information or to arrange service, visit www.
axlersupports.com or call Customer Service at 212-594-2353.
Product warranty is provided by the Gradus Group.
www.gradusgroup.com
Axler is a registered trademark
of the Gradus Group.
© 2016 Gradus Group LLC. All Rights Reserved.
• Please read and follow these instructions
and keep this manual in a safe place.
• Keep this product away from children.
• Use only parts provided by the
manufacturer.
• Make sure everything is secure before
proceeding.
• Make sure that this product is intact and
that there are no missing parts.
• To avoid damage to this product, be careful
not to overtighten or improperly thread any
of the threaded fittings.
• Do not exceed the maximum load capacity.
• All images are for illustrative purposes only.
P R E C A U T I O N S
QUICK-START
GUIDE
GG2
B E F O R E Y O U S TA R T
This quick-start guide contains some basic
instructions for balancing the Robin Pro
05R V2 Stabilizer. Setting up a stabilizer like
the Robin Pro 05R V2 is not complicated,
but it takes some fine-tuning. Don’t feel
discouraged if it takes a few tries to balance
the stabilizer—a little patience goes a long
way.
Before you start, set up your camera in the
exact way that you are going to use it when
shooting with the stabilizer. For example,
if you are going to use your camera’s LCD
panel, make sure to extend the panel before
mounting your camera onto the stabilizer.
Any change to the camera’s balance will
change its center of gravity, and make it
necessary to readjust the stabilizer.
S E T U P
1. Remove the quick-release plate from the
stabilizer by holding down the quick-release
locking button. Slide the plate off the
mount.(Fig.1)
2. Mount your camera to the stabilizer’s
quick-release plate by lining up the 1/4″-20
threaded bolt and screwing it in clockwise.
Some devices, like a cell phone, may need an
additional mounting accessory for secure
attachment.
3. With your device on the plate, hold down
the quick-release locking button on the
stabilizer mount and slide the plate back in.
(Fig. 2)
4. Center your device as best as possible on
top of the stabilizer by using the forward/
backward and left/right adjustment knobs.
(Fig. 3-4)
B A L A N C I N G T H E S T A B I L I Z E R
1. Now it’s time to balance your stabilizer.
Grab the stabilizer’s handle and see how it
balances. It will likely not be perfectly level
at first. (Fig. 3-4)
2. Adjust the height of the gimbal on the
center column by loosening the gimbal
locking collar and slide to the desired
height. (Fig. 5)
3. Secure the gimbal by tightening the
locking collar. Repeat these steps until the
stabilizer remains vertically balanced while
you hold it by the handle.
Fig. 1
Fig. 2
Fig. 4
Fig. 5
1. Sled
2. Quick-release plate
3. 1/4″-20 mounting
threads
4. Quick-release locking
knob
5. Locking-pin release
button
6. Forward/backward
adjustment knob
7. Left/right adjustment
knob
8. Handle
9. Center column
10. Gimbal
11. Gimbal locking collar
12. Counterweight
O V E R V I E W
1
35
4
2
9
8
7
6
10
11
12
Fig. 3

Termékspecifikációk

Márka: Axler
Kategória: Háromlábú
Modell: Robin 05R V2

Szüksége van segítségre?

Ha segítségre van szüksége Axler Robin 05R V2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Háromlábú Axler

Axler

Axler VM-2370CF/VH-12 Útmutató

20 December 2024
Axler

Axler CS-CF-30LW Útmutató

20 December 2024
Axler

Axler FCS-1428 Útmutató

20 December 2024
Axler

Axler Robin 20S Útmutató

20 December 2024
Axler

Axler Robin 05R V2 Útmutató

20 December 2024
Axler

Axler CS-CPS-20A Útmutató

20 December 2024
Axler

Axler CS-CF-30 Útmutató

20 December 2024

Útmutatók Háromlábú

Legújabb útmutatók Háromlábú

Sony

Sony VCT-FXA Útmutató

23 December 2024
Sony

Sony RDP-CA3M Útmutató

23 December 2024
Sony

Sony GP-VPT1 Útmutató

23 December 2024
Sony

Sony VCT-55LH Útmutató

23 December 2024
Sony

Sony VCT-R100 Útmutató

23 December 2024
Sony

Sony CIB-PCM1 Útmutató

23 December 2024
Rollei

Rollei Universal L-Bracket Útmutató

21 December 2024
Rollei

Rollei Rock Solid Gamma Mark II Útmutató

21 December 2024
Rollei

Rollei Lion Rock Stativkopf 25 Útmutató

21 December 2024
Rollei

Rollei Traveler Útmutató

21 December 2024