Használati útmutató Axler CS-CF-30
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Axler CS-CF-30 (2 oldal) a Háromlábú kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/2
www.AxlerSupports.com
CS-CF-30
ONE-YEAR LIMITED WARRANTY
This Axler product is warranted to the original purchaser to be free
from defects in materials and workmanship under normal consumer
use for a period of one (1) year from the original purchase date or thirty
(30) days after replacement, whichever occurs later. The warranty
provider’s responsibility with respect to this limited warranty shall be
limited solely to repair or replacement, at the provider’s discretion, of
any product that fails during normal use of this product in its intended
manner and in its intended environment. Inoperability of the product or
part(s) shall be determined by the warranty provider. If the product has
been discontinued, the warranty provider reserves the right to replace
it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse,
neglect, accident, alteration, abuse, improper installation or
maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY
PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY
IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. This warranty provides you with specific legal rights, and
you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Axler Customer Service
Department to obtain a return merchandise authorization (˝RMA˝)
number, and return the defective product to Axler along with the RMA
number and proof of purchase. Shipment of the defective product is at
the purchaser’s own risk and expense.
For more information or to arrange service, visit www.axlersupports.com
or call Customer Service at 212-594-2353.
Product warranty is provided by the Gradus Group.
www.gradusgroup.com
Axler is a registered trademark of the Gradus Group.
© 2016 Gradus Group LLC. All Rights Reserved.
• Please read and follow these instructions, and keep this manual in a safe place.
• Keep this product away from children.
• Make sure everything is secure before proceeding.
• Make sure that this product is intact and that there are no missing parts.
• To avoid damage to this product, be careful not to overtighten or improperly
thread any of the threaded fittings.
• Do not exceed the maximum load capacity.
• Be careful not to catch your fingers in any of the moving parts.
• All images are for illustrative purposes only.
S l i d e r :
1. Feet (x6)
2. Light-stand mounting sockets (5/8")
3. Mounting cheese plate
(1/4"-20 and 3/8"-16 sockets)
4. Brake
5. Camera base
6. Bubble level
7. 3/8"-16 threaded mount
8. Wheels
9. Tripod mounting sockets
(1/4"-20 and 3/8"-16)
A l s o I n c l u d e d :
• Carry case
• User manual
O V E R V I E W
P R E C A U T I O N S
QUICK-START
GU IDE
GG1
2
1
1
1
2
3
5
7
4
6
1
1
1
9
8
M o un t i n g o n Tw o Tr i p o d s
1. Align the tripods’ threaded posts with the
corresponding 1/4˝-20 and 3/8˝-16 sockets
on each end of the slider (Fig. 3).
2. Screw in each tripod until secure.
Tip: It may be easier to turn the slider upside
down to screw in the tripods.
3. Using the bubble level on the camera base,
adjust the tripods to align the slider with
the horizon.
Note: The slider’s center feet can be removed for this
operation if they interfere with tripod mounting (Fig. 2).
M o un t i n g o n Tw o L i g h t S t a n d s
1. Locate the 5/8˝ mounting sockets
for standard light-stand spigots on
either end of the slider (Fig. 4).
2. Use a 4 mm hex key (not included)
to loosen the set screws on each
socket, and place the slider onto
the spigots.
3. Tighten the set screws until
secure.
4. Using the bubble level on the camera base, adjust
the light stands to align the slider with the
horizon.
M O U N T I N G Y O UR C A M E R A T O T H E S L ID E R
Important!
Before mounting your camera, lock down the camera
base by securing the brake.
1. Secure the slider on a stable, level surface or make
sure that the slider is securely mounted on the tripod.
2. Tighten the brake on the camera base.
M o u n t i n g o n O n e Tr i p o d
1. Center the camera base on the slider,
and lock it down with the brake (Fig. 1).
2. Align the appropriate mounting hole
on the bottom of the camera base
with the mounting post of the tripod,
and screw the tripod in (Fig. 2).
Tip: It may be easier to turn the slider
upside down to screw in the tripod.
Note: It is recommended to use the center
3/8˝-16 socket for the greatest balance
and stability. If your tripod has a 1/4˝-20
mounting post, use a 1/4˝ to 3/8˝ bushing
adapter (available separately) to attach the
slider.
3. Using the bubble level on the camera
base, adjust the tripod legs to align the
slider with the horizon.
Note: The slider’s center feet can be
removed for this operation if they interfere
with tripod mounting (Fig. 2).
U S I N G T H E S L I D E R
Once your camera is mounted, loosen
the brake and manually move your
camera along the slider. If the slider
is positioned at an incline, keep one
hand on the camera base before
loosening the brake (Fig. 6).
M O U N T I N G T HE C S - C F - 3 0
The CS-CF-30 can be mounted on a single tripod. For added stability, the
slider can be supported by two tripods or light stands.
Note: To avoid wobbling and camera shake, use sand bags or other weights
to stabilize your tripods or light stands.
T H A N K Y O U F O R C H O O S I N G A X L E R .
The Axler CS-CF-30 Camera Slider is a portable solution for capturing
tracking shots and push-ins that can add artistic and cinematic elements
to your video productions. With sturdy 15 mm carbon-fiber rods that
support up to 50 pounds, the slider is capable of accommodating large
video cameras and lenses as well as DSLR cameras. Precision-machined
aluminum wheels assure quiet and smooth tracking along the rails for
fluid camera motion that a microphone won’t pick up. A brake lever is
conveniently located on the side of the base.
The aluminum camera base employs a 3/8˝-16 mounting stud for a video
head or ball head. A mounting cheese plate on the bottom of the base has
many 1/4˝ and 3/8˝ mounting sockets for adding lights, microphones, and
other accessories to your rig.
Fig. 1
Fig. 3
Fig. 6
Fig. 4
Fig. 2
Fig. 5
S P E C I F I C AT I O N S :
• Slide length: 3˝ (76.2 cm)
• Maximum load capacity (Freestanding): 50lbs (22.7 kg)
Note: When mounted on a tripod, the maximum load capacity
will depend on the weight capacity of the tripod.
• Mounting post: 3/8˝-16
• Tripod and accessory sockets: 1/4 -20 and 3/8˝ ˝-16
• Light stand mounting sockets: 5/8˝ (16 mm)
• Rod construction: Carbon fiber
• Dimensions (H ¬ W ¬ L): 2.75 ¬ 7 (7 ¬ 17.8 ¬ 80 cm)˝ ˝ ¬ 31.5˝
• Weight: 3.55 lb. (1.6 kg)
3. Rotate the tripod head clockwise
until it is flush with the camera
platform and secure (Fig. 5).
Important!
DO NOT MOUNT THE TRIPOD
HEAD WHEN THE CAMERA IS
ATTACHED!
Mount the camera only once the tripod
head is secure on the camera platform.
Termékspecifikációk
| Márka: | Axler |
| Kategória: | Háromlábú |
| Modell: | CS-CF-30 |
Szüksége van segítségre?
Ha segítségre van szüksége Axler CS-CF-30, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Háromlábú Axler
20 December 2024
20 December 2024
20 December 2024
20 December 2024
20 December 2024
20 December 2024
20 December 2024
Útmutatók Háromlábú
- Háromlábú Sony
- Háromlábú SilverCrest
- Háromlábú Eurolite
- Háromlábú Asus
- Háromlábú Rollei
- Háromlábú Hama
- Háromlábú Proaim
- Háromlábú Kodak
- Háromlábú Omnitronic
- Háromlábú Bresser
- Háromlábú DJI
- Háromlábú Konig & Meyer
- Háromlábú Godox
- Háromlábú On Air
- Háromlábú Levenhuk
- Háromlábú Flycam
- Háromlábú Kogan
- Háromlábú Hohem
- Háromlábú Røde
- Háromlábú Zhiyun
- Háromlábú Konig
- Háromlábú ARRI
- Háromlábú Pyle
- Háromlábú Magnus
- Háromlábú Joby
- Háromlábú Gravity
- Háromlábú Neewer
- Háromlábú Laserliner
- Háromlábú REVO
- Háromlábú Miller
- Háromlábú Sky-Watcher
- Háromlábú Square Jellyfish
- Háromlábú Fidlock
- Háromlábú Glide Gear
- Háromlábú Vortex
- Háromlábú Robus
- Háromlábú Manfrotto
- Háromlábú Easypix
- Háromlábú AVerMedia
- Háromlábú Celestron
- Háromlábú Vello
- Háromlábú Barska
- Háromlábú Benro
- Háromlábú GVM
- Háromlábú Sachtler
- Háromlábú Sunpak
- Háromlábú Celly
- Háromlábú Drift
- Háromlábú Gitzo
- Háromlábú Velbon
- Háromlábú Ultimate Support
- Háromlábú Oben
- Háromlábú Dorr
- Háromlábú Winegard
- Háromlábú Libec
- Háromlábú MOZA
- Háromlábú Ulanzi
- Háromlábú Sirui
- Háromlábú Vinten
- Háromlábú Acratech
- Háromlábú ProMediaGear
- Háromlábú Ravelli
- Háromlábú Mantona
- Háromlábú Olloclip
- Háromlábú Cullmann
- Háromlábú Vanguard
- Háromlábú IFootage
- Háromlábú FeiYu-Tech
- Háromlábú FeiyuTech
- Háromlábú MOVE'N SEE
- Háromlábú Kaiser Fototechnik
- Háromlábú Slidekamera
- Háromlábú IOptron
- Háromlábú FLOWCINE
- Háromlábú SteadiCam
- Háromlábú Fat Gecko
- Háromlábú 3 Legged Thing
- Háromlábú FLM
- Háromlábú Peak Design
- Háromlábú Studio Assets
- Háromlábú Stalco
- Háromlábú Tiltall
- Háromlábú E-Image
- Háromlábú Cam Caddie
- Háromlábú MotoCrane
- Háromlábú Cartoni
- Háromlábú HPRC
- Háromlábú Really Right Stuff
- Háromlábú Ruggard
- Háromlábú Ready Rig
Legújabb útmutatók Háromlábú
23 December 2024
23 December 2024
23 December 2024
23 December 2024
23 December 2024
23 December 2024
21 December 2024
21 December 2024
21 December 2024
21 December 2024