Használati útmutató Argox AS-8020CL

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Argox AS-8020CL (18 oldal) a Vonalkód olvasó kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/18
NOTICE:
This equipment has been tested and complied with
the limits for a Class a digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to
provide a reasonable protection against harmful
interface when the equipment is operated under a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the
instruction manual, may cause harmful interface to
radio communications. Operation of this equipment in
a residential area is likely to cause harmful interface in
which case the user will be required to correct the
interface at his own expenses.
Note: All brands and trademarks shall belong to their
respective owner.
Note: Specification is subject to changes without
notice.
This device complies with Part 15 of the FCC Rules.
Operation shall be subject to the following two
conditions:
(1) This device may not cause harmful interface, and
(2)
This device must accept any interface received,
including interface that may cause undesirable
operation.
Using the ArgoxScan AS-8020CL
The ArgoxScan can automatically scan barcode at a distance.
Simply aim and pull the trigger. Code scanning is performed
along the center of the light bar emitted from the reading
window. This bar must cover the entire code (see “How to
Scan” in page 9).
Successful scanning shall be obtained by tilting the scanner
with respect to the barcode to avoid direct reflections that
impair the reading performance.
Recommended Steps
When the required settings have been configured, all settings
are stored in non- volatile memory of scanner and cradle
after reading EXIT Label. Recommended steps are as
follows.
1) Host interface will be automatically detected. User does
not need to set host interface for the cradle.
2) Set interface to optimize protocol of cradle with your
host in interface section.
3) Set system control of scanner, such as specific
adjustments double confirm, indicator and scanning
mode which you prefer usage in system control section.
4) Set code options of scanner for your usage in code
option section. You must make sure to enable the
symbology first, then Min./Max. code length, code ID
checksum and truncate digits are also converted.
5) Set string format of the scanner, such as preamble,
postamble Prefix, suffix, code ID and code name
transmission for your application in string format
section.
Note: If still not work properly. Please contact your dealer for
further information.

Termékspecifikációk

Márka: Argox
Kategória: Vonalkód olvasó
Modell: AS-8020CL

Szüksége van segítségre?

Ha segítségre van szüksége Argox AS-8020CL, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Vonalkód olvasó Argox

Argox

Argox AS-8310 Útmutató

27 Augusztus 2024
Argox

Argox AR-3100 Útmutató

27 Augusztus 2024
Argox

Argox AI-6801 Útmutató

27 Augusztus 2024
Argox

Argox AS-8020CL Útmutató

27 Augusztus 2024
Argox

Argox AI-6821 Útmutató

26 Augusztus 2024
Argox

Argox AI-6821HD Útmutató

26 Augusztus 2024
Argox

Argox AS-8000 Útmutató

26 Augusztus 2024
Argox

Argox AS-8120 Útmutató

26 Augusztus 2024
Argox

Argox PT-90 Útmutató

26 Augusztus 2024
Argox

Argox AS-9600 Útmutató

26 Augusztus 2024

Útmutatók Vonalkód olvasó

Legújabb útmutatók Vonalkód olvasó