Használati útmutató Argon BASS8 MK2

Argon mélynyomó BASS8 MK2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Argon BASS8 MK2 (7 oldal) a mélynyomó kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/7
w w w . a r g o n a u d i o . c o m 1
BASS
8
02 OWNER’S MANUAL
05 ILLUSTRATIONS
07 SPECIFICATIONS
07 TROUBLESHOOTING
w w w . a r g o n a u d i o . c o m 2
BASS 8
Owner ’s manual
Dear Customer,
Quality has always been our driving force and founding
Argon Audio is a natural extension of this philosophy.
We have 20 years’ experience in creating and specifying
high quality products, manufacturing them and selling them
on to end users with Value-for-Money as the primary aim.
And Argon Audio is a brand fully compliant with these
values.
Design, features and quality standards are all specied in
Denmark and manufacturing takes place in the Far East,
where quality vendors are highly competitive - and as a
result supply outstanding Value-for-Money products
– to the delight of both ourselves and our customers!
Introduction
Thank you for choosing Argon Audio Subwoofer, we hope it
will bring you many years of enjoyment.
Please read this manual fully before unpacking and
installing the product.
Argon BASS8 is manufactures with a no-nonsense
approach. BASS8 is without any unnecessary gimmicks,
bling bling or fancy features. The money is spent on quality
components, ecient woofer driver and extremely solid
cabinet. Quality features you only see on products twice the
price of an Argon BASS8.
Unpacking
We have during production and packing carefully checked
and inspected this Subwoofer.
After unpacking please check for any damage from
transport.
We recommend that you keep the original carton box and
packing material for any future shipping.
Subwoofer installation
The Subwoofer requires connection to the mains power
supply, so for your safety it is important that you read both
this manual and the amplier manual before connecting.
Subwoofer positioning
Variations in placement of loudspeakers can produce
dramatic dierences in the way music sounds. No listening
room is the same and therefore we encourage you to spend
some time experimenting with which placements work best
in your listening room. Positioning of Subwoofers is
however less critical compared with full-range loudspeakers
because the low frequencies reproduced by a subwoofer
can be dicult to locate in the room. You can start with our
basic recommendations.
To begin with, if you use the Subwoofer in a surround set-
up, the Subwoofer should ideally be positioned between the
TV and one of your front loudspeakers, as g. 2 to 4 on
page 6. If you are using the Subwoofer in a stereo set-up
the Subwoofer should ideally be positioned between the two
front stereo speakers, as g.1on page 6.
You should know that, if the Subwoofer is placed close to a
wall or in a corner, the bass sound will be enhanced.
w w w . a r g o n a u d i o . c o m 3
BASS 8
It’s your choice what you like the most. Another example is
the placement of the Subwoofer in the middle of the stereo
speakers or away from the center of the stereo speakers.
This may have an impact on how you perceive the stereo
image, even though its only low frequency sounds that
come from the Subwoofer.
Trust your ears and be willing to experiment freely.
(Almost) everything is possible ☺
Running-in period
We recommend a running-in time of your new BASS8
Subwoofer of approximately 15-20 hours at normal listening
level before you decide on the nal positioning and control
settings of the Subwoofer. During the running-in time the
drive units will settle in and perform as intended.
Connecting your Subwoofer
We recommend that you read the manual of your Amplier
or AV-receiver carefully before connecting your Subwoofer.
First switch o the Amplier and all equipment before you
connect the Subwoofer.
If your Amplier/av-reciever has a SUB-OUT or PRE-OUT
function: Connect the Subwoofer input IN (10) as shown on
page 5 and your Ampliers/av-recievers SUB-OUT or PRE-
OUT with a RCA/phono cable.
If your Amplier does NOT have a SUB-OUT or PRE-OUT
function:
Connect the speaker cables from the Amplier to the
Subwoofer (8) left/right, +/- as shown on page 5. Then
connect the satellite speakers to the Subwoofer using (7)
left/right, +/- as shown on page 5.
When nished connect the subwoofer net cable (6) as
shown on page 5 to the mains voltage, and push the
POWER ON/OFF button (4) as shown on page 5 to ON
position, the indicator lamp POWER LED will now glow blue
and the Subwoofer is active and ready to be used.
The Argon BASS8 Subwoofer has a built-in AUTO
STANDBY function and after approximately 10 minutes
without any input signal the subwoofer will automatically
switch o, and the indicator lamp POWER LED will change
color. When an input signal is detected the subwoofer will
become active and the indicator lamp POWER LED will
glow blue.
Setting volume, frequency and phase
The volume, crossover and phase (controls 1, 2 and 3 on
page 4-5 ) can be adjusted on the rear panel, and we
recommend that you adjust the setting of these controls to
your liking – try with dierent music and lms. If you want
more detailed information on these control functions, we
invite you to visit our homepage www.argonaudio.com.
Care and cleaning
We don’t recommend use of any solvents or cleaners on
Argon BASS8 cabinet, the cabinet surface usually only
requires dusting or cleaning with a damp soft cloth
(only use cold clean water).
The grille fabric may be cleaned with a normal clothes brush
or vacuumed carefully with the grille detached from the
cabinet. Avoid touching the drive unit, and do not use the
Subwoofer as a coee or drinks table (risk of water being
spilled into the subwoofer).
Disconnect the Subwoofer from the mains supply if taken
out of use for a longer period.

Termékspecifikációk

Márka: Argon
Kategória: mélynyomó
Modell: BASS8 MK2

Szüksége van segítségre?

Ha segítségre van szüksége Argon BASS8 MK2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók mélynyomó Argon

Argon

Argon BASS12 Útmutató

2 Augusztus 2024
Argon

Argon BASS8 MK2 Útmutató

29 Július 2024
Argon

Argon BASS10 MK2 Útmutató

29 Július 2024
Argon

Argon BASS15 Útmutató

28 Július 2024
Argon

Argon BASS10 Útmutató

10 Július 2024
Argon

Argon BASS8 Útmutató

7 Július 2024

Útmutatók mélynyomó

Legújabb útmutatók mélynyomó

Phase Technology

Phase Technology IW200-II Útmutató

4 Április 2025
Wet Sounds

Wet Sounds ZERO 10 S4 XZ-W Útmutató

2 Április 2025
SoundTube

SoundTube CM1001D Útmutató

2 Április 2025
JL Audio

JL Audio FS108-W5 Útmutató

31 Március 2025
Phase Technology

Phase Technology PL-12p Útmutató

30 Március 2025
ETON

ETON Graphit 8-2 Útmutató

19 Március 2025
ETON

ETON Graphit 8-4 Útmutató

19 Március 2025
ETON

ETON Graphit 10-4 Útmutató

19 Március 2025
ETON

ETON MW 10 FLAT Útmutató

19 Március 2025
ETON

ETON PW 8 Útmutató

19 Március 2025