Használati útmutató APC AP9834

Olvassa el alább 📖 a magyar nyelvű használati útmutatót APC AP9834 (1 oldal) a hálózati kártya/adapter kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/1
APC USB Wi-Fi Device Quick Start Guide
AP9834
10/ /100
1000
NOTE: A supported Network Management
Card 3 (AP9641/AP9643) with valid TCP/IP
settings running firmware version 1.4 or
higher is required to use and configure the
APC USB Wi-Fi Device.
990-91418-001
09/2020
For more information and troubleshooting, refer to
the NMC 3 User Guide on the APC website -
apc.com/us/en/download/document/
SPD_CCON-AYCEFJ_EN
© 2020 Schneider Electric. All Rights Reserved. Schneider Electric and APC are trademarks and the
property of Schneider Electric SE, its subsidiaries and affiliated companies.
Enable and configure wi-fi via the NMC Web UI
( navigation path), or Configuration > Network > Wi-Fi
Command Line Interface ( command). For morewifi
information, consult the NMC 3 User Guide and CLI Guide
on the APC website - apc.com/upsnmc
Insert the APC USB
Wi-Fi Device into an
available USB port.
10100/ /
1000
USB
1
2
NOTE: The APC USB Wi-Fi Device’s
LED will flash green when wi-fi has
successfully been configured and
connected to the wi-fi network.

Termékspecifikációk

Márka: APC
Kategória: hálózati kártya/adapter
Modell: AP9834

Szüksége van segítségre?

Ha segítségre van szüksége APC AP9834, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók hálózati kártya/adapter APC

APC

APC APVS9602 Útmutató

25 Szeptember 2024
APC

APC NBWC100U Útmutató

3 Augusztus 2024
APC

APC AP9834 Útmutató

1 Augusztus 2024
APC

APC AP9643 Útmutató

7 Július 2024
APC

APC AP9630 Útmutató

14 Május 2024

Útmutatók hálózati kártya/adapter

Legújabb útmutatók hálózati kártya/adapter