Használati útmutató Apart SUBLIME-W

Apart mélynyomó SUBLIME-W

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Apart SUBLIME-W (8 oldal) a mélynyomó kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/8
The APart SUBLIME subwoofer is designed to reproduce a fat and deep bass despite its slim
dimensions.
This subwoofer is the ideal partner for the APart MASK2 satellite speakers. A custom made lter and
protection circuitry is incorporated inside the SUBLIME speaker, allowing optimal blending with the
MASK2 satellite speakers.
Optionally, you can use the SUBLIME speaker in an active speaker setup, using an active lter and
separate power amplier. You can use the SUBLIME up to 200 Hz.
The cabinet is only 12 cm deep, and the speaker and connection terminals are invisible when mounted
on the wall using the included wall mounting brackets.
It may look like a small heating radiator when mounted to the wall, but instead of heat, it will radiate
musical vibes in your room.
Due to its discrete design and small dimensions, the subwoofer is very easy to integrate even in the
most demanding environments. You can use it lying at on the oor, hide it under a bench, behind the
curtains, or even mount it on the wall using the included wall mounting brackets.
In order to get the most satisfying sound, it is essential that you read this section carefully prior to
connecting the subwoofer to your system.
It is generally believed that low frequencies are nondirectional and therefore, placement of a subwoofer
within the listening room is not critical ... however :
Please note that the performance of the subwoofer is directly related to its placement in the
listening room.
Placement close to a room corner, will increase the amount of bass output, while placing the subwoofer
along the middle of a wall, or out in the middle of a room will decrease the amount of bass output.
Experiment with a number of different placement options to nd the one that best suits your particular
room and musical taste.
Other locations will provide varying degrees of low bass impact and blending with your front speakers.
We recommend listening to your system, with the subwoofer in different room positions,
to obtain a location with an optimum response.
If you hear too little bass : try moving the subwoofer further towards the room corner or try reversing the
polarity of the satellites (phase reverse).
IMPORTANT NOTES: this speaker will perform awlessly only when you follow our
amplier and system recommendations.
Do not apply clipped or overloaded signals. Do not apply high power bass lower than 50 Hz.
This speaker is NOT magnetically shielded, so if you have a CRT screen, place the speaker at sufcient
distance from the screen. Modern plasma, LCD, TFT or LED screens are insensitive to magnetic
interference, so you can install this speaker close to such devices without limitations.
For possible and supported speaker/amp combinations, ask your dealer or take a look at our speaker
sets on our website :
www.apart-audio.com
We recommend to use the subwoofer mounted to the wall. Special mounting brackets are included.
First, position the subwoofer on a table with the connection terminals facing up (towards you).
Protect the surface by using the packing material. A speaker template with the location of the drill holes
is included with the subwoofer. Position the SPEAKER template on the subwoofer’s backplate and drill
the mounting holes with a 2 mm drill. Fix the brackets on the backplate.
Next, position the WALL template on the wall and mark the drill holes.
Fix the remaining brackets on the wall. Connect the speaker cable to the terminals.
Carefully slide the subwoofer over the wall brackets and push it rmly in place.
A few millimeters of tolerance allows you a nice t, and also some extra suspension,
resulting in good acoustical insulation from the wall.
This speaker has been carefully packed at the factory. Open the carton box and remove the speaker
from the packing. Do not use sharp objects to remove the protective bag from the speaker.
Place the speaker on a at surface. The mounting brackets are included in the packing.
When the product shows signs of damage caused by transportation, contact your dealer immediately.
Damage due to transport and rough handling is not covered by the manufacturers warranty.

Termékspecifikációk

Márka: Apart
Kategória: mélynyomó
Modell: SUBLIME-W

Szüksége van segítségre?

Ha segítségre van szüksége Apart SUBLIME-W, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók mélynyomó Apart

Apart

Apart SUB2201 Útmutató

8 December 2024
Apart

Apart LOUNGESET-BL Útmutató

5 Október 2024
Apart

Apart SUBLIME-W Útmutató

18 Szeptember 2024
Apart

Apart Sublime Útmutató

29 Augusztus 2024
Apart

Apart SUB2400 Útmutató

30 Július 2024
Apart

Apart SUBLIME-BL Útmutató

29 Július 2024
Apart

Apart SUBA165 Útmutató

28 Július 2024
Apart

Apart SUB2201-BL Útmutató

11 Július 2024
Apart

Apart SUB2201-W Útmutató

6 Július 2024

Útmutatók mélynyomó

Legújabb útmutatók mélynyomó

Phase Technology

Phase Technology IW200-II Útmutató

4 Április 2025
Wet Sounds

Wet Sounds ZERO 10 S4 XZ-W Útmutató

2 Április 2025
SoundTube

SoundTube CM1001D Útmutató

2 Április 2025
JL Audio

JL Audio FS108-W5 Útmutató

31 Március 2025
Phase Technology

Phase Technology PL-12p Útmutató

30 Március 2025
ETON

ETON Graphit 8-2 Útmutató

19 Március 2025
ETON

ETON Graphit 8-4 Útmutató

19 Március 2025
ETON

ETON Graphit 10-4 Útmutató

19 Március 2025
ETON

ETON MW 10 FLAT Útmutató

19 Március 2025
ETON

ETON PW 8 Útmutató

19 Március 2025