Használati útmutató Zvox SoundBase 440

Zvox hangszóró SoundBase 440

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Zvox SoundBase 440 (2 oldal) a hangszóró kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/2

Remote Control Capabilities

Volume

The VOLUME buttons on the SoundBase remote control operate in the

normal manner.

Power (STANDBY)

The Power button on the SoundBase remote control toggles the SoundBase

between STANDBY and On. Note: Automatic Standby operation on a

SoundBase is selected as a default. If you wish the SoundBase to turn off

only when you push the POWER button on the “learned” remote control

or the ZVOX remote control, select PS11 on the PS options. Download the

PDF document “SoundBase Adjustment Options” from the SUPPORT page

of the ZVOX Audio website www.zvoxaudio.com.

A SoundBase in STANDBY will automatically turn back on if it senses a

volume, mute or power infrared command from the “learned” remote control

or the SoundBase Remote control.

Mute

The MUTE button on the SoundBase remote control operates in the normal

manner. When MUTE is active, the display will show a blinking -00- for 20

seconds.

Bass and Treble

The Bass control has a range of -6 to 4.

The Treble control has a range of -4 to 4.

Note: The bass output of a SoundBase system is affected by its position

within a room. You may nd it sounds best with slightly more or less bass

than the neutral setting.

Surround Settings

There are three SURROUND levels:

• Surround One (“Sd 1”) has low virtual surround effect and strong vocals.

Use this setting if vocal clarity is important to you.

• Surround Two (“Sd 2”) has moderate virtual surround effect and moderate

vocals. Most people prefer this setting for most program material.

• Surround Three (“Sd 3”) has strong virtual surround effect

and moderate vocals. Many people prefer this setting when watching

movies or sporting events.

Output Leveling

Engage Output Leveling to reduce volume swings between TV programs,

commercials and TV channels. OL appears on the display when Output

Leveling is engaged. Output Leveling boosts quiet dialog a large amount

and reduces output of the loudest commercial breaks. You will need to

use a lower number volume setting when Output Leveling is engaged.

This is normal. This feature can be used along with any of the three

Surround settings.

Accuvoice

Press this button to increase the clarity of most voices.

Pressing Accuvoice overrides the current Surround setting. A second press

returns the SoundBase to the last-used Surround setting.

STILL NEED ASSISTANCE? If your home TV system does not conform to the

descriptions in this guide, don’t hesitate to send an inquiry to info@zvoxaudio.com

or call ZVOX Audio at (866) 367-9869. Please provide your TV brand and model

number. A ZVOX Audio representative should be available (Eastern Time Zone)

Monday through Friday 9:30 AM to 7:30 PM.

4b. SoundBase Front Panel and Rear Panel

4a. Infrared Remote Control Features of the SoundBase

Learning:

You can “teach” the SoundBase to respond to your current TV remote

control for the following functions: Volume, Mute (on/off) and Power (on/

off). See the separate sheet for instructions. After this “learning” process,

you will not need the SoundBase remote control for adjusting Volume,

Mute and Power. Teaching the SoundBase to respond to your preferred

remote does not affect the included SoundBase remote. The SoundBase

remote will still provide its full range of adjustments.

Input Selection:

Pressing the INPUT button allows you to select a different input.

Inputs are selected in the following order:

Input 1—digital (optical or coaxial jack)

Input 2—analog (input 2)

Input 3—analog (input 3)

Bluetooth device (SoundBase 450 and 350 only)

Bass set at -2

Treble set at 1

Mute

MUTE VOLUME INPUT

® ZVOX, SoundBase and AccuVoice are registered trademarks of ZVOX Audio, LLC.

® Bluetooth is a registered trademark owned by Bluetooth SIG, Inc. used under license by ZVOX Audio LLC.

Setup & Operation

ZVOX SoundBase

®450/440/350/330

Don’t Worry It’s Pretty Easy.

What’s in the box

SoundBase system • Remote control • Instruction sheets

AC power cord with external power supply • Optical digital and analog signal cables

(866) 367-9869 | info@zvoxaudio.com

SoundBase Front Panel Control

SoundBase Back Panel Inputs

1 MUTE/Power button. If the system is on, a press of this button toggles MUTE on and

off. Also while the system is on, if you press and hold the MUTE button for longer than

four seconds, the system will enter STANDBY.

2 VOLUME -/+. The volume range indication is 01 to 30.

3 INPUT. Selects between the inputs on the SoundBase (four inputs on the Soundbase 450

and 350, or three inputs on the SoundBase 440 and 330). See 4a Input selection in the

rst column.

5. Digital Audio Troubleshooting

TV sets with no audio output:

You should check the program sources connected to the TV for an audio output (cable box, disc

player, game box). Many cable boxes and DVD/Blu-ray players have both analog and digital audio

outputs. If you connect directly to a set top box and a DVD/Bluray player, you need to switch

inputs on the TV and the SoundBase.

Bluray disc audio:

If you don’t get sound from a Bluray disc, the digital audio on that disc may be encoded using

a proprietary format. In this case, use the Bluray disc menu or the Bluray player menu to select

Dolby Digital or PCM digital output.

Internet streaming HD video audio:

If your TV features a internet connection and displays HD streaming content, it may be

necessary to select Dolby Digital or PCM digital audio in the TV or from the streaming provider’s

sound options. In some cases, it may be necessary to use the TV’s analog audio output to

hear audio from streaming movies. This is the case when a TV’s internal streaming application

cannot limit the digital audio format to PCM or Dolby Digital.

It is possible to eliminate selection of unused inputs on your SoundBase. Download the PDF

document “SoundBase Adjustment Options” from the SUPPORT page of the ZVOX Audio

website www.zvoxaudio.com for further information.

Place the system on furniture.

STEP 1

STEP 2

STEP 3

STEP 4

Connect one signal cable.

Connect the power cable.

Use the SoundBase remote to

select the correct input and volume.

Home Theater

Made Simple!

Coaxial Digital Output

A few TVs, set top boxes and DVD/Blu-ray players have a coaxial digital audio output. You

can connect this output to the coaxial input on the SoundBase using a cable with an RCA

plug at each end.

Program Sources with an Analog Audio Output

If you don’t have a digital audio output option on your TV, you could connect the TV set’s

analog audio output to one of the two analog audio inputs on the the Soundbase. The analog

audio output on your TV will be a stereo minijack or a pair of RCA jacks. The two illustrations

below show the appearance of these two connections.

You could also connect the headphone output of a smartphone (or any music player) to one

of the two analog audio inputs on the SoundBase.

1. Speaker placement

You can place the SoundBase on any at, stable surface near your TV. If the TV base is small

enough, you can place the SoundBase system on a piece of furniture and then place the TV

on top of the SoundBase.

• Consider the nish of the surface that will support the SoundBase. It is the SoundBase

owner’s responsibility to insure the supporting surface’s nish is unaffected by

supporting a SoundBase and a TV that may be on top of the SoundBase. Place a

barrier between the supporting surface and the feet of the SoundBase if you wish to insure

the surface nish is unaffected by supporting the SoundBase.

A thick surface nish, a newly-nished or renished surface or hand-applied surface nish

may deform or react at the contact points of any heavy object resting on the surface. The

four support pads on the bottom of the SoundBase are a soft, inert synthetic material that

does not react with typical, cured furniture nishes. But some furniture nishes can be

deformed or altered when supporting any heavy object for a long period of time. ZVOX

Audio, Inc cannot be held responsible for any change in the appearance or integrity of any

supporting surface nish that occurs after a SoundBase is placed upon the surface.

• A safe installation is the SoundBase owner’s responsibility.

• Use an unswitched AC outlet to provide power to a SoundBase. With Auto Standby

engaged, a SoundBase will enter its Standby state less than 30 minutes after it stops

receiving an audio signal. Using a switched AC outlet to cut and restore AC power to a

SoundBase results in a delay before sound is heard from the SoundBase.

• A TV heavier than 70 lbs (32 kg) should not be placed directly on top of a SoundBase 450

or 440.

• A TV heavier than 50 lbs (23 kg) should not be placed directly on top of a SoundBase 350.

• A at panel TV has a high center of gravity. Please conrm the furnishing supporting

your TV and the SoundBase is stable and secure. The surface supporting the

SoundBase/TV combination should not move in any direction.

• All TV manufacturers recommend that a at panel TV be anchored to a secure vertical

surface with a tether. This prevents a household accident from causing a TV to fall off its

supporting surface. ZVOX Audio recommends you heed this recommendation and all other

installation recommendations made by the TV manufacturer.

2. Connecting your TV to the SoundBase

Almost all HDTVs have an audio output, which you can connect to your SoundBase. You

should not disconnect or change any video program source connected to your TV.

15. Grounding or Polarization–This product may be

equipped with a polarized alternating-current line

plug (a plug having one blade wider than the other).

This plug will t into the power outlet only one way.

This is a safety feature. If you are unable to insert the

plug fully into the outlet, try reversing the plug. If the

plug should still fail to t, contact your electrician to

replace your obsolete outlet. Do not defeat the safety

purpose of the polarized plug.

Alternate Warnings–This product is equipped with

a three-wire grounding-type plug, a plug having a

third (grounding) pin. This plug will only t into a

grounding-type power outlet. This is a safety feature.

If you are unable to insert the plug into the outlet,

contact your electrician to replace your obsolete

outlet. Do not defeat the safety purpose of the

grounding-type plug.

16. Ventilation–Slots and openings in the cabinet

are provided for ventilation and to ensure reliable

operation of the product and to protect it from

overheating, and these openings must not be

blocked or covered. The openings should never be

blocked by placing the product on a bed, sofa, rug,

or other similar surface. This product should not be

placed in a built-in installation such as a bookcase

or rack unless proper ventilation is provided or the

manufacturer’s instructions have been adhered to.

17. The MAINS plug or an appliance coupler is used as the

disconnect device, the disconnect device shall remain

readily operable.

18. CLASS II apparatus with double insulation, and no

protective earth provided.

19. CAUTION: Danger of explosion if the remote control

battery is incorrectly replaced. Replace only with the

same or equivalent type.

20. WARNING: The remote control battery (battery or

batteries or battery pack) shall not be exposed to

excessive heat such as sunshine, re or the like.

21. No naked ame sources, such as lighted candles,

should be placed on the apparatus.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

ampliers) that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. If

the provided plug does not t into your outlet, consult

an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

11. Only use attachments/accessories specied by

the manufacturer.

12. Use only with the cart, stand, tripod,

bracket, or table specied by the

manufacturer, or sold with the apparatus.

When a cart is used, use caution when

moving the cart/apparatus combination to

avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or

when unused for long periods of time.

14. Refer all servicing to qualied service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

Important Safety Instructions

READ THIS FIRST

Important Safety Instructions For ZVOX System

CAUTION

RISK OF ELECTRICAL

SHOCK, DO NOT OPEN

Warning: To reduce

the risk of electrical

shock, do not remove

cover (or back) – no

serviceable parts

inside. Refer servicing

to qualied service

personnel.

This lightning ash with arrowhead

symbol, within an equilateral triangle, is

intended to alert the user to the presence

of uninsulated “dangerous voltage” within

the product’s enclosure that may be of

sufcient magnitude to constitute a risk

of electrical shock to persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

TO PREVENT FIRE OR

SHOCK HAZARD, DO

NOT EXPOSE THIS

APPLIANCE TO RAIN

OR MOISTURE.

THIS APPLIANCE SHALL

NOT BE EXPOSED

TO DRIPPING OR

SPLASHING WATER

AND NO OBJECT

FILLED WITH LIQUIDS

SUCH AS VASES

SHALL BE PLACED

ON APPARATUS.

WARNING

3. Connect the AC cord

After making the signal connection, connect the AC power cord to the back of the speaker.

Then connect the AC power cord to an AC power receptacle. Turn on the speaker using the

power switch on the back panel next to the AC cord.

If your home TV system does not conform to the descriptions in this

guide, don’t hesitate to send an inquiry to info@zvoxaudio.com or

call ZVOX Audio at (866) 367-9869. Please provide your TV brand

and model number. A ZVOX Audio representative should be available

(Eastern Time Zone) Monday through Friday 9:30 AM to 7:30 PM.

You can connect a minijack analog audio output to Analog Input 2.

You can connect an RCA jack analog audio output to Analog Input 2.

AC cord connection to SoundBase back panel.

TV Optical Output ZVOX Optical Input

Optical Cable

Optical Digital Output

Almost all HDTVs use an optical digital audio output, which you connect to the Soundbase’s

optical input using an optical cable.

Stable Placement. Do not place the ZVOX

system on an unstable surface. The ZVOX

system may fall, causing serious injury to a

person and damage to the product. Do not

operate the ZVOX system on an unstable surface.

Placement of a TV on the ZVOX system. A television that

weighs less than the cited limits and has a base smaller

than both size limits (shown below) can be placed on top of

a ZVOX system—BUT ONLY IF THESE SAFETY

PRECAUTIONS ARE STRICTLY OBSERVED.

• The TV must be anchored to the rear wall using

anchor bolts and supporting cables according to

the recommended guidelines provided by the TV

manufacturer. Household accidents and other

unforeseen events are may occur. ZVOX Audio

Special Safety Warnings Regarding Placement of

ZVOX System and Other Equipment

provides no guarantee that any object placed on top

of a ZVOX Audio product is safe and stable. It is the

sole responsibility of the ZVOX owner to check that

any object placed on the top of the ZVOX system is

stable at the time of installation and at frequent

intervals afterward.

• SoundBase 450/440: TV weight-70 lbs (32 kg) or less.

The base of the TV must measure less than:

Width Depth

26 in (660 mm) 13.5 in (343 mm)

• SoundBase 350/330: TV weight-50 lbs (23 kg) or less.

The base of the TV must measure less than:

Width Depth

22 in (558 mm) 10.5 in (267 mm)

• Prevent the ZVOX system from changing position

after installation.

Setup and Remote Learning

Connect the

SoundBase

to your TV

and/or audio

devices.

Learn the

features and

controls of the

ZVOX system.

“Teach” the SoundBase

to respond to your

preferred remote

control’s commands

(Volume/Mute/Power).

Place the

SoundBase.

Input 2

Termékspecifikációk

Márka:	Zvox
Kategória:	hangszóró
Modell:	SoundBase 440

Szüksége van segítségre?

Ha segítségre van szüksége Zvox SoundBase 440, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók hangszóró Zvox

Zvox SB400 Soundbar Útmutató

23 Augusztus 2024

Zvox AccuVoice AV200 Útmutató

23 Augusztus 2024

Zvox SoundBase 440 Útmutató

23 Augusztus 2024

Zvox ACCUVOICE AV203 Útmutató

22 Augusztus 2024

Zvox SB380 SoundBar Útmutató

22 Augusztus 2024

Zvox Z-Base 555 Útmutató

22 Augusztus 2024

Zvox AccuVoice AV155 Útmutató

22 Augusztus 2024

Zvox SB500 Soundbar Útmutató

22 Augusztus 2024

Zvox 430 HSD Útmutató

6 Augusztus 2024

Zvox 430 Útmutató

6 Augusztus 2024

Útmutatók hangszóró

Legújabb útmutatók hangszóró

Lenco PA-101 Útmutató

5 Január 2025

Majority D100 Útmutató

5 Január 2025

Audibax Roma 120 Go Útmutató

5 Január 2025

Audibax Detroit 200 Go BT Útmutató

5 Január 2025

Audibax Detroit 1000 DSP Útmutató

5 Január 2025

Audibax Denver 10 Útmutató

5 Január 2025

Audibax GA04 Útmutató

5 Január 2025

Audibax Oasis 6T Útmutató

5 Január 2025

Audibax Seattle 500 Útmutató

5 Január 2025

Audibax Delta 32 BT Útmutató

5 Január 2025