Használati útmutató Zebra RS6100

Zebra nincs kategorizálva RS6100

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Zebra RS6100 (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/2
RS5100/RS6100
Enterprise Hand Mount
Quick Start Guide
MN-004352-02EN Rev. A - 1/2023
ZEBRA and the stylized Zebra head are
trademarks of Zebra Technologies Corp.,
registered in many jurisdictions
worldwide. All other trademarks are the
property of their respective owners.
© 2023 Zebra Technologies Corp. and/or
its affiliates. All rights reserved.
Zebra Technologies |
3 Overlook Point |
Lincolnshire, IL 60069 USA
www.zebra.com
Warranty
For the complete Zebra hardware product warranty statement, go
to: zebra.com/warranty.
Service Information
Before you use the unit, it must be configured to operate in your
facility’s network and run your applications.
If you have a problem running your unit or using your equipment,
contact your facility’s Technical or Systems Support. If there is a
problem with the equipment, they will contact the Zebra Global
Customer Support at zebra.com/support.
For the latest version of this guide go to:
zebra.com/support.
Additional Information
For information on using the RS5100 or RS6100, refer to the
corresponding product guide available at: zebra.com/support.
Enterprise Hand Mount
The Enterprise Hand Mount allows the RS5100/RS6100
to be worn on the back of your hand and provides a
remote finger trigger. The hand wrap is available for
right-handed and left-handed users and in multiple sizes,
distinguished by the color of the stitching:
•Small = white
•Medium = black
•Large = blue
To attach the Enterprise Hand Mount:
1. Install the hand wrap to the mount, noting the position
for right or left-handed user.
2. Position the hand mount on the hand.
3. Install the scanner onto the mount.
Install Hand Wrap for a
Right-Handed User
To install the hand wrap to the mount for a right-handed
user:
1. Insert the trigger cable and button through the trigger
slot.
2. Insert the mount strap through the left slot of the mount
(as it sits on your hand) and slide under the mount.
3. Insert the mount strap up through the remaining slot of
the mount and fasten the strap end.
Install Hand Wrap for a
Left-Handed User
To install the hand wrap to the mount for a left-handed
user:
1. Insert the trigger cable and button through the trigger
slot.
2. Insert the mount strap through the right slot of the
mount (as it sits on your hand) and slide under the
mount.
3. Insert the mount strap up through the remaining slot of
the mount and fasten the strap end.
Position Hand Mount on Hand
To position the hand mount on the hand:
1. Slide your hand through the hand wrap, with your
thumb through the smaller opening and remaining four
fingers through the larger opening. Note the position for
a left or right-handed user.
2. Adjust the strap to a comfortable position to fit
securely.
3. Slide the strap through the buckle and secure the end
of the strap in place.
NOTE: The snap under the strap is a safety
breakaway and is not used to secure the strap.
4. Position the finger trigger button to allow access by
your thumb and fasten it in place.
5. Align the mount on the hand wrap:
a. Lift the mount strap.
b. Detach and lift the mount.
c. Reposition the mount on the hand wrap to align the
mount with your middle finger knuckle.
d. Fasten the strap.
Install RS5100/RS6100
To install the scanner onto the Enterprise Hand Mount:
1. Align the contacts on the scanner with the contacts on
the mount and engage the slot on the scanner (located
at the top of the scanner on the backside) with the
opening at the top of the hand mount.
2. Push down on the scanner to snap into place.
Correct Installation
Incorrect Installation
Detach RS5100/RS6100
To detach the scanner from the Enterprise Hand Mount:
1. Press the release buttons on both sides of the mount.
2. Lift the scanner off the mount.
Cleaning the Hand Wrap
Before cleaning the hand wrap, remove the electronics:
1. Unfasten the strap and detach the mount.
2. Slide the mount off the strap.
3. Remove the finger trigger button and cable from the
hand wrap.
4. Use an approved cleaning agent or mild detergent on
the hand wrap material only and air dry.

Termékspecifikációk

Márka: Zebra
Kategória: nincs kategorizálva
Modell: RS6100

Szüksége van segítségre?

Ha segítségre van szüksége Zebra RS6100, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók nincs kategorizálva Zebra

Zebra

Zebra 7530 G2 Útmutató

10 Január 2025
Zebra

Zebra WS50 Útmutató

31 December 2025
Zebra

Zebra 8595 Útmutató

24 Szeptember 2024
Zebra

Zebra 8585 Útmutató

23 Szeptember 2024
Zebra

Zebra RCH51 Útmutató

22 Szeptember 2024
Zebra

Zebra TC58 Útmutató

17 Szeptember 2024
Zebra

Zebra FXR90 Útmutató

30 Augusztus 2024
Zebra

Zebra TC27 Útmutató

19 Augusztus 2024
Zebra

Zebra TC22 Útmutató

19 Augusztus 2024
Zebra

Zebra RS6100 Útmutató

9 Augusztus 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

Shure

Shure WA555 Útmutató

30 Március 2025
Einhell

Einhell ESS 9000-T Útmutató

30 Március 2025
Einhell

Einhell AV 10 Útmutató

30 Március 2025
American DJ

American DJ POW-R Bar Rack USB Útmutató

30 Március 2025
Vimar

Vimar EBRP.M Útmutató

30 Március 2025
Acer

Acer Vero MST Dock M32 Útmutató

30 Március 2025
FABER CASTELL

FABER CASTELL Wonderful Washi Tape Útmutató

30 Március 2025
FABER CASTELL

FABER CASTELL Mask Making Útmutató

30 Március 2025
FABER CASTELL

FABER CASTELL e-motion Útmutató

30 Március 2025
FABER CASTELL

FABER CASTELL Ultimate Nail Studio Útmutató

30 Március 2025