Használati útmutató York Fitness 360HRC

Olvassa el alább 📖 a magyar nyelvű használati útmutatót York Fitness 360HRC (40 oldal) a Cross edző kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/40
HELP LINE (8:30am- 4:30pm)
U.K. AUSTRALIA N.Z.
YORK BARBELL (U.K.) LTD.
CHURCHILL WAY, DAVENTRY,
NORTHANTS, NN11 4YB ENGLAND
TEL: (01327) 701-824
FAX: (01327) 706-704
E-MAIL: helpdesk@yorkfitness.co.uk
HELP LINE (8:00am- 4:00pm)
BERNSPORT (1995) LTD.
PO BOX 33-973 TAKAPUNA,
AUCKLAND NEW ZEALAND.
TEL: +64-9-488-4750
FAX: +64-9-488-4759
E-MAIL: sales@bernsport.co.nz
HELP LINE (8:30am- 4:30pm)
YORK BARBELL (AUST.) LTD.
UNIT 1, LOT 2, SWAFFHAM ROAD,
MINTO, N.S.W. 2566 AUSTRALIA
TEL: (02) 9603-8444
FAX: (02) 9603-8555
E-MAIL: heatheryork@ozemail.com.au
YORK ELLIPTICAL 360HRC / 01
SAFETY GUIDELINES:
Please read and follow the following safety guidelines:
Read this owners manual and follow the instructions.
Assemble and operate the YORK ELLIPTICAL CROSSTRAINER 360HRC on a solid, level surface.
Keep the area behind the YORK ELLIPTICAL CROSSTRAINER 360HRC clear.
You will need at least one person to help you assemble this unit, two would be better.
Always use your YORK ELLIPTICAL CROSSTRAINER 360HRC in adequate space e.g.,
at least 2 ft. (60cm) clearance on each side.
Never allow children on or near the YORK ELLIPTICAL CROSSTRAINER 360HRC.
Always check the YORK ELLIPTICAL CROSSTRAINER 360HRC before using it,
in particular make sure all parts are assembled, and nuts and bolts are tightened.
Do not use the YORK ELLIPTICAL CROSSTRAINER 360HRC if the unit is disassembled in any way.
YORK ELLIPTICAL CROSSTRAINER 360HRC
The is designed for use and enjoyment in the home (NOT FOR
COMMERCIAL USE). By following the above precautions and using good judgement and common sense, you
will have a safe and pleasurable exercise regimen with the .
YORK ELLIPTICAL CROSSTRAINER 360HRC
YORK ELLIPTICAL CROSSTRAINER 360HRC
CARE AND MAINTENANCE
Use a warm damp cloth with mild detergent to keep
your clean.YORK ELLIPTICAL CROSSTRAINER 360HRC
TOOLS REQUIRED
The tools enclosed in the carton are three allen
keys (which one has a screwdriver function) and
one multi-purpose spanner.
SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
Keep hands away from moving parts.
The weight limit for this product is 115 kgs ( 260 lbs ).
Wear proper workout clothing: Do not wear loose clothing.
Do not wear shoes with leather soles or high heels. Tie all long hair back.
Remove jewellery, rings, chains and pins before exercising.
Do not rock the unit from side to side.
Care should be taken when mounting and dismounting the unit.
Do not place any liquids on any part of the YORK ELLIPTICAL CROSSTRAINER 360HRC.
Do not use any accessories that aren’t specifically recommended by the manufacturer,
these might cause injuries or cause the unit to fail.
Always consult your doctor before undertaking any exercise programme.
Work within your recommended exercise level, do NOT work to exhaustion.
If you feel any pain or abnormal symptoms, STOP YOUR WORKOUT IMMEDIATELY.
Consult your physician immediately.
TAKE CARE TO PROTECT CARPETS AND FLOORS in case of leakages.
This product is a machine and contains moving parts which have been greased /
lubricated and could leak.
This machine requires a 6V 1000mA A.C. Adaptor. Use of adaptors not specifically
recommended by YORK may damage your machine and void your warranty.
T
T
T
TAKE CARE TO PROTECT CARPETS
AKE CARE TO PROTECT CARPETS
AKE CARE TO PROTECT CARPETS
AKE CARE TO PROTECT CARPETS AND FLOORS
AND FLOORS
AND FLOORS
AND FLOORS
WARNING: Injuries could occur particularly to young children if the guards are
removed and not correctly reinstated.
WE DO NOT RECOMMEND THE REMOVAL OF THE GUARDS.
Always check the guards to ensure they are secured before use.
If guards are not secured tighten the screws on the guards.
SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
**
1.
ASSEMBLY INSTRUCTION
ATTACH THE REAR STABILIZER
The front stabilizer has moving wheels near each end.
Find a polyfoam block from the carton and rest
the right pedal post assembly on it as shown.
Fix the front stabilizer to the main frame and
secure, using two carriage bolts, washers,
spring washers and nylon locknuts.
The rear stabilizer has end caps that can vary
in height to enable you to level the trainer on
uneven floors.
X4
A
A
NOTE: MAKE SURE you fasten the nuts and bolts
securely for your safety and comfort when
pedalling.
NOTE: MAKE SURE
NOTE: MAKE SURE
NOTE: MAKE SURE
NOTE: MAKE SURE
GENERAL
WE RECOMMEND YOU HAVE SOMEONE ASSIST YOU IN LIFTING AND ASSEMBLING
YOUR YORK ELLIPTICAL CROSSTRAINER 360HRC.
REMOVE ALL THE PARTS OF YOUR
FROM THE CARTON AND PLACE THEM ON THE FLOOR CAREFULLY.
FOLLOW THESE INSTRUCTIONS CAREFULLY AND IT WILL MAKE IT EASIER FOR
YOU TO ASSEMBLE YOUR
YORK ELLIPTICAL CROSSTRAINER 360HRC
YORK ELLIPTICAL CROSSTRAINER 360HRC.
ATTACH THE FRONT STABILIZER
REAR
STABILIZER
END CAP
POLYFOAM
BLOCK
2.
#8582-09
#8582-10 #8582-11 #8582-57
FRONT
STABILIZER
MOVING
WHEEL
Fix the rear stabilizer to the main frame and
secure, using two carriage bolts, spring washers,
washers and nylon locknuts.
Fix the plastic caps onto the locknut heads.
X4
#8582-12
NOTE: This equipment has been supplied
with some Nylon
Locknuts.
It is essential that the nuts are fully
tightened onto the bolts, so that
the bolt penetrates through the
nylon insert.
Fix the plastic caps onto the locknut heads.
YORK ELLIPTICAL 360HRC / 02

Termékspecifikációk

Márka: York Fitness
Kategória: Cross edző
Modell: 360HRC

Szüksége van segítségre?

Ha segítségre van szüksége York Fitness 360HRC, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Cross edző York Fitness

Útmutatók Cross edző

Legújabb útmutatók Cross edző

Kettler

Kettler Axos Cross P Útmutató

28 Szeptember 2024
Matrix

Matrix A50 Útmutató

23 Szeptember 2024
Domyos

Domyos VE 230 Útmutató

21 Szeptember 2024
Kettler

Kettler XTR-1 Útmutató

13 Szeptember 2024
Domyos

Domyos VE 430 Útmutató

10 Szeptember 2024
Schwinn

Schwinn 431 Útmutató

8 Szeptember 2024