Használati útmutató X9 Performance X9RF2ACMOUSE

X9 Performance egér X9RF2ACMOUSE

Olvassa el alább 📖 a magyar nyelvű használati útmutatót X9 Performance X9RF2ACMOUSE (3 oldal) a egér kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/3

X9RF2ACMOUSE

User guide

USB-A AND TYPE-C

DUAL MODE WIRELESS

RF MOUSE

USER GUIDE

Abo gu e ut this id

Before you start using the X9RF2ACMOUSE,

be sure to read this guide in its entirety.

Safety intructions

Package contents

• X9RF2ACMOUSE

• USB receiver dongles: 1 USB-A and 1 Type-C

• 1 "AA" battery

• User guide

Hardware basics

The X9 Performance X9RF2ACMOUSE is a

2.4GHz wireless USB-A and Type-C dual

mode mouse with a 800/1200/1600 dpi

optical sensor, three soft-click buttons and

scroll wheel for a precise and smooth

control, plus a dpi switch button. The

ergonomic and ambidextrous design offers

maximum comfort to both left-handed and

right-handed users and helps to increase

your productivity. The X9RF2ACMOUSE

comes with both USB-A and Type-C RF

dongles which allow you to connect the

mouse up to 2 systems simultaneously and

switch between 2 devices with the click of a

button. Compatible with Mac, PC, iPad Pro,

Android and Chromebook devices without

the need of any driver.

Please read the following carefully before using this

X9 Performance product. Incorrect use of this

product may result in reduced performance,

permanent damage and void warranty:

1. Do not place this product near a heat source.

2. Operating temperature of -5°C to 40°C. Storage

temperature of -5°C to 40°C.

3. Do not place this product near moisture nor

liquids.

4. Operate and store at humidity of 20% to 90%

(non-condensing)

5. Do not place heavy objects on this product.

6. Do not drop this product.

7. Do not dispose this product in the garbage. Take

it to your local recycling centre.

The X9RF2ACMOUSE does not require special

drivers and will automatically be recognized by the

computer as soon as the dongle is inserted into a

USB port. Simply follow the steps below and you

are ready to go!

1. Push to slide the compartment cover open.

2. From the dongle storage slot, remove the USB

RF dongle for the system type you have, either

USB-A or Type-C, or both dongles if you have 2

systems to connect.

Type-C/USB-C system

(Mac,PC,iPad Pro, Surface,

Android, Chromebook)

USB-A system(Mac,

PC, Surface,

Chromebook)

Type-C system

indicator LED

USB-A

system

indicator

LED

On-Off

switch

Installation instructions

Right Click

Left Click

OFF ON

Scroll

wheel

DPI Select

Button (800/

1200/1600)

Storage

slot for

USB-A

dongle

(slide out)

Storage

slot for

Type-C dongle

(lifted out

vertically)

Battery

slot

800/

1200/1600

Optical

Sensor

USB-A RF

dongle for

USB-A system

Type-C RF

dongle for

Type-C system

“AA”

battery

AAA

OFF ON

Technical support

Warranty

X9 Performance warrants that this product will be free from defects in title,

materials and manufacturing workmanship for one year from the date of the

purchase. If the product is found to be defective then, as your sole remedy and

as the manufacturer’s only obligation, X9 Performance will repair or replace

the product. This warranty is exclusive and is limited to the X9RF2ACMOUSE.

This warranty shall not apply to products that have been subjected to abuse,

misuse,abnormal electrical or environmental conditions, or any condition

other than what can be considered normal use. The liability of X9 Performance

arising from this warranty and sale shall be limited to a refund of the purchase

price. In no event shall X9 Performance be liable for costs of procurement of

substitute products or services, or for any lost prots, or for any consequential,

incidental, direct or indirect damages, however caused and on any theory of

liability, arising from this warranty and sale. These limitations shall apply

notwithstanding any failure of essential purpose of any limited remedy.

For tech support please call +1 909 230 6888 or

e-mail us at techsupport@x9performance.com.

Tech support hours are from 8:30 AM to 5:30 PM

Monday through Friday (Pacific Standard Time).

Sync USB RF dongle with the mouse

3. Install the battery, close the compartment cover

and switch to turn on the power.

Type-C system is selected

when this LED lights up briefly

USB-A system is selected

when this LED lights up briefly

Press system/ mode button

to switch between USB-A

and Type-C/USB-C system

4. Make sure your computer or device with USB RF

dongle plugged in are powered on and running,

then press the system/mode button in the

X9RF2ACMOUSE to connect it to the USB-A system

and Type-C/USB-C system, one at a time, test the

mouse functionality in both systems. Once the

mouse is set up to connect to both systems and

working, you are ready to go. Just remember to use

the system/mode button to switch the mouse

between 2 systems. Please note, whichever the

system/mode LED the mouse is in before the

mouse is turned off, that is the system/mode you

will get after turning the mouse back on.

Note: only if you have followed the Installation

Instruction several times already but couldn't get

the mouse to work, or if you lost the original USB

RF dongle and get a new dongle from us, you can

resync the dongle

and the mouse with procedures below:

1, Prep - have battery installed into the mouse

battery compartment, switch to turn on the mouse,

then press the system/mode button into the mode

LED for the new RF dongle type you will resync the

mouse with. For example, if new RF dongle is

USB-A type, press the system/mode button to

select into USB-A system/LED. Then switch to turn

off the mouse.

2, Plug the new RF dongle into a running computer

USB port. The dongle will start searching for a

mouse, (normally up to 15 seconds it will stop

searching).

3, Promptly bring the mouse a few inches nearby

the new RF dongle. Switch to turn on the mouse,

immediately press and hold down both scroll wheel

and right button together for 3-5 seconds, the

mouse should sync with the new RF dongle

automatically. Test the mouse to see if it works or

not.

4, If it does not work, repeat step 1 through 3.

Note: You can configure the mouse buttons,

pointer, pointer options and scroll wheel in the

Hardware/Control Panel section of your computers

settings and preferences.

(3), switch to turn

on the power

(2), close the compartment cover

(1), install “AA” battery

OFF ON

AAA

Termékspecifikációk

Márka:	X9 Performance
Kategória:	egér
Modell:	X9RF2ACMOUSE

Szüksége van segítségre?

Ha segítségre van szüksége X9 Performance X9RF2ACMOUSE, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók egér X9 Performance

X9 Performance X9RFDYNAMOUSE Útmutató

6 Szeptember 2024

X9 Performance X9RF2ACMOUSE Útmutató

29 Július 2024

X9 Performance X9RFATOPBAT Útmutató

28 Július 2024

Útmutatók egér

Legújabb útmutatók egér

11 December 2024

11 December 2024

9 December 2024

9 December 2024

9 December 2024

9 December 2024

9 December 2024

BenQ ZOWIE FK1 Útmutató

9 December 2024

BenQ ZOWIE EC1 Útmutató

9 December 2024

Rapoo 7200M Útmutató

9 December 2024