Használati útmutató Worx WX914L

Worx fúrógép WX914L

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Worx WX914L (28 oldal) a fúrógép kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/28

20V Cordless Impact Driver EN

Lecteur d’impact sans 20V F

Taladro percutor de impacto sin cables 20V ES

P03

P12

P20

WARNING: Some dust created by power

sanding, sawing, grinding, drilling and other

construction activities contains chemicals

known to the State of California to cause

cancer, birth defects or other reproductive

harm. Some examples of these chemicals are:

• Lead from lead-based paints;

• Crystalline silica from bricks and cement

and other masonry products;

• Arsenic and chromium from chemically-

treated lumber.

Your risk from these exposures varies,

depending on how often you do this type

of work. To reduce your exposure to these

chemicals, work in a well ventilated area, and

work with approved safety equipment, such as

those dust masks that are specially designed to

ﬁlter out microscopic particles.

WARNING: This product can expose you

to chemicals including lead and Di(2-

ethylhexyl)phthalate (DEHP) which are known to

the State of California to cause cancer and birth

defects or other reproductive harm. For more

information go to www.P65Warnings.ca.gov.

WARNING: Read all safety warnings,

instructions, illustrations and

speciﬁcations provided with this power tool.

Failure to follow all instructions listed below may

result in electric shock, ﬁre and/or serious injury.

Save all warnings and instructions for future

reference.

The term “power tool” in the warnings refers to your

mains-operated (corded) power tool or battery-

operated (cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of

ﬂammable liquids, gases or dust. Power

tools create sparks which may ignite the dust or

fumes.

c) Keep children and bystanders away while

operating a power tool. Distractions can

cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet.

Never modify the plug in any way. Do

not use any adapter plugs with earthed

(grounded) power tools. Unmodiﬁed plugs

and matching outlets will reduce risk of electric

shock.

b) Avoid body contact with earthed or

grounded surfaces, such as pipes,

radiators, ranges and refrigerators. There is

an increased risk of electric shock if your body is

earthed or grounded.

c) Do not expose power tools to rain or wet

conditions. Water entering a power tool

will increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord

for carrying, pulling or unplugging the

power tool. Keep cord away from heat,

oil, sharp edges or moving parts. Damaged

or entangled cords increase the risk of electric

shock.

e) When operating a power tool outdoors, use

an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces

the risk of electric shock.

f) If operating a power tool in a damp

location is unavoidable, use a residual

current device (RCD) protected supply. Use

of an RCD reduces the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and

use common sense when operating a

power tool. Do not use a power tool while

you are tired or under the inﬂuence of

drugs, alcohol or medication. A moment of

inattention while operating power tools may

result in serious personal injury.

b) Use personal protective equipment.

Always wear eye protection. Protective

equipment such as dust mask, non-skid safety

shoes, hard hat, or hearing protection used for

appropriate conditions will reduce personal

injuries.

c) Prevent unintentional starting. Ensure

the switch is in the off-position before

connecting to power source and/or battery

pack, picking up or carrying the tool.

Carrying power tools with your ﬁnger on the

switch or energizing power tools that have the

switch on invites accidents.

d) Remove any adjusting key or wrench

before turning the power tool on. A wrench

or a key left attached to a rotating part of the

power tool may result in personal injury.

e) Do not overreach. Keep proper footing

and balance at all times. This enables

better control of the power tool in unexpected

situations.

f) Dress properly. Do not wear loose clothing

or jewelry. Keep your hair and clothing

away from moving parts. Loose clothes,

jewelry or long hair can be caught in moving

parts.

g) If devices are provided for the connection

of dust extraction and collection facilities,

ensure these are connected and properly

used. Use of dust collection can reduce dust-

related hazards.

h) Do not let familiarity gained from frequent

Termékspecifikációk

Márka:	Worx
Kategória:	fúrógép
Modell:	WX914L

Szüksége van segítségre?

Ha segítségre van szüksége Worx WX914L, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók fúrógép Worx

Worx WX956L Útmutató

10 December 2024

Worx WX170.4 Útmutató

17 Augusztus 2024

11 Augusztus 2024

10 Augusztus 2024

8 Augusztus 2024

7 Augusztus 2024

6 Augusztus 2024

Worx WXJCR.9 Útmutató

5 Augusztus 2024

Worx WX178.9 Útmutató

5 Augusztus 2024

Worx WX170.2 Útmutató

3 Augusztus 2024

Útmutatók fúrógép

Legújabb útmutatók fúrógép

DeWalt DCB126 Útmutató

6 Január 2025

MSW -DMS400 Útmutató

5 Január 2025

DeWalt DCD1624 Útmutató

3 Január 2025

DeWalt DW9106 Útmutató

31 December 2025

Güde GTB 16/12 R+L Útmutató

31 December 2025

Metabo BS 12 BL Q Útmutató

31 December 2025

Milwaukee M12 BDDXKIT Útmutató

30 December 2025

Herkules SB 1625/1D Útmutató

30 December 2025

Global AS-G 18/1 Útmutató

30 December 2025

Global AS-G 18 Útmutató

30 December 2025