Használati útmutató Worx WX822L.9

Worx Multi-szerszám WX822L.9

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Worx WX822L.9 (12 oldal) a Multi-szerszám kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/12
20V Cordless Detail Sander EN
20V Cordless Detail Sander F
20V Cordless Detail Sander ES
P03
P11
P23
3
WARNING: Some dust created by power
sanding, sawing, grinding, drilling
and other construct ion activit ies contains
chemicals known to the State of California
to cause cancer, birth defects or other
reproductive harm. Some examples of these
chemicals are:
• Lead from lead-based paints;
• Crystalline silica from bricks and cement
and other masonry products;
• Arsenic and chromium from chemically-
treated lumber.
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to these
chemicals: work in a well ventilated area,
and work with approved safety equipment,
such as those dust masks that are specially
designed to filter out microscopic particles.
WARNING: This product can expose
you to chemicals including lead and
Di(2-ethylhexyl)phthalate (DEHP) which
are known to the State of California to
cause cancer and birth defects or other
reproductive harm. For more information go
to www.P65Warnings.ca.gov.
WARNING: Read all safety warnings,
instructions, illustrat ions and
specifications provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is
an increased risk of electric shock if your body is
earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric
shock.
e) When operating a power tool outdoors,
use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment
of inattention while operating power tools may
result in serious personal injury.
b) Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal
injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or
battery pack, picking up or carrying the
tool. Carrying power tools with your finger on
the switch or energising power tools that have
the switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A wrench
or a key left attached to a rotating part of the
power tool may result in personal injury.
e) Do not overreach. Keep proper footing
and balance at all times. This enables
better control of the power tool in unexpected
situations.
f) Dress properly. Do not wear loose clothing
or jewelry. Keep your hair and clothing
away from moving parts. Loose clothes,
jewelry or long hair can be caught in moving
parts.
g) If devices are provided for the connection
of dust extraction and collection facilities,

Termékspecifikációk

Márka: Worx
Kategória: Multi-szerszám
Modell: WX822L.9

Szüksége van segítségre?

Ha segítségre van szüksége Worx WX822L.9, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Multi-szerszám Worx

Worx

Worx WX822L Útmutató

9 Október 2024
Worx

Worx WX696L.1 Útmutató

4 Október 2024
Worx

Worx WX693.9 Útmutató

31 Augusztus 2024
Worx

Worx WX822L.9 Útmutató

14 Augusztus 2024
Worx

Worx WX686L Útmutató

1 Augusztus 2024
Worx

Worx Sonicrafter WX671.3 Útmutató

27 Július 2024
Worx

Worx WX820L.9 Útmutató

26 Július 2024
Worx

Worx Sonicrafter WX671.5 Útmutató

24 Július 2024
Worx

Worx WX677 Útmutató

22 Július 2024
Worx

Worx Sonicrafter WX673.3 Útmutató

13 Július 2024

Útmutatók Multi-szerszám

Legújabb útmutatók Multi-szerszám

Powerblade

Powerblade PC4MT5 Útmutató

10 December 2024
EGO

EGO PH1420E Útmutató

9 December 2024
Einhell

Einhell TE-MG 200 E Útmutató

8 December 2024
Parkside

Parkside PAMFW 20-Li A1 Útmutató

15 Október 2024
Güde

Güde GGF 620 Útmutató

14 Október 2024
Powerfix

Powerfix PMW 2 B1 Útmutató

8 Október 2024
Ferm

Ferm OTM1001 Útmutató

22 Szeptember 2024
Black & Decker

Black & Decker Matrix BDCDMT120IA Útmutató

21 Szeptember 2024
Powerfix

Powerfix IAN 89109 Útmutató

11 Szeptember 2024
Ferm

Ferm OTM1007 Útmutató

10 Szeptember 2024