Használati útmutató Wolf 808332

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Wolf 808332 (8 oldal) a Páraelszívó kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/8
Page 1
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR IN-
JURY TO PERSONS, OBSERVE THE FOLLOWING:
TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:
TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT
OF A RANGE TOP GREASE FIRE, OBSERVE THE FOLLOW-
ING:*
READ AND SAVE THESE INSTRUCTIONS
Installer: Leave this manual with
the homeowner.
Homeowner: Use and Care
information on page 4.
!
FOR DOMESTIC COOKING ONLY
!
WARNING
CAUTION
!
If ventilator is installed in an unconditioned space (such as
an attic):
TABLE OF CONTENTS
y“TYPICAL INSTALLATION”
y“MOUNTING OPTIONS”
y“WIRING PLATE POSITION”
y“DUCTING OPTIONS”
y“USE AND CARE”
IN-LINE BLOWER
For use with models CTWH30, CTWH36, IH4227, DD30R, DD36R, W30-662418,
W30-662718, I36-663418, L34-582212
MODEL 808332
Page 2
MOUNTING USING HANGER KIT (included)
Blower factory-shipped in straight-through
discharge position.
TYPICAL INSTALLATION
DUCTING (Horizontal blower discharge)
Two ways to connect ductwork to a factory-shipped unit.
TYPICAL INSTALLATION
MOUNTING (New Frame Construction)
Factory-shipped unit installed in new construction.
MOUNTING (Existing Frame Construction)
Factory-shipped unit installed in existing construction. IMPORTANT: Remove shipping tape from damper
Page 3
WIRING PLATE POSITION
DUCTING OPTIONS
BLOWER DISCHARGE POSITIONS
Wiring plate mounts to side or top of housing.
Ventilator shown in
horizontal discharge
position. (Factory shipped)
Ventilator shown in
vertical discharge position.
(Change movable panel to
new location as shown.)
DUCTING (Vertical blower discharge)
Typical ductwork connection to a ventilator converted to
vertical discharge.
Ventilator can be wired from outside of housing.
Use UL approved connectors to wire per local codes.
18"
1½"
to
2½"
18"
1½"
to
2½"
22"
22"
1
1
/
8
"
MAX.
MOUNTING OPTIONS
Mounting brackets in
factory-shipped position -
mounted directly to joists.
Mounting brackets flipped
over and mounted to
additional framing.
Factory-Shipped
Straight-Through
Discharge
Factory-Shipped
Straight-Through
Discharge
Housing
Converted to
Right-Angle
Discharge
Mounting brackets flipped
over and mounted to
additional framing.
Mounting brackets flipped
over and mounted to top of
housing. Housing secured
with cables.
Factory-Shipped
Straight-Through
Discharge
WIRING

Termékspecifikációk

Márka: Wolf
Kategória: Páraelszívó
Modell: 808332

Szüksége van segítségre?

Ha segítségre van szüksége Wolf 808332, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Páraelszívó Wolf

Wolf

Wolf PW302210 Útmutató

18 Szeptember 2024
Wolf

Wolf PWC362418 Útmutató

14 Szeptember 2024
Wolf

Wolf PL462212 Útmutató

9 Szeptember 2024
Wolf

Wolf VW36B Útmutató

1 Szeptember 2024
Wolf

Wolf PW422210 Útmutató

31 Augusztus 2024
Wolf

Wolf 808332 Útmutató

21 Augusztus 2024
Wolf

Wolf VI45G Útmutató

13 Augusztus 2024
Wolf

Wolf PL522212 Útmutató

13 Augusztus 2024
Wolf

Wolf PW483318O Útmutató

3 Augusztus 2024
Wolf

Wolf DD45 Útmutató

2 Augusztus 2024

Útmutatók Páraelszívó

Legújabb útmutatók Páraelszívó

Atag

Atag WM 5 Útmutató

30 Március 2025
Smeg

Smeg CA60EPX Útmutató

30 Március 2025
CATA

CATA C GLAS H BK Útmutató

30 Március 2025
Smeg

Smeg STH650X Útmutató

30 Március 2025
Elica

Elica PIX BL/F/42 Útmutató

30 Március 2025
Etna

Etna 4191 inox Útmutató

29 Március 2025
Miele

Miele da 249 1 Útmutató

29 Március 2025
Miele

Miele DA 420 UL Útmutató

29 Március 2025