Használati útmutató Wireless Solution WiFi upgrade for G6

Wireless Solution TV antenna WiFi upgrade for G6

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Wireless Solution WiFi upgrade for G6 (1 oldal) a TV antenna kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/1
WiFi installation instructions
1. Needed tools: side-cutter,
plier, Torx T10 screwdriver,
Philips screwdriver.
4. Place the antenna from the
inside and fasten it with the
screws and nuts. Use the plier
and T10 screwdriver to tighten.
5. Use the cable-tie to fasten
the antenna cable to the XLR to
avoid the antenna touching the
high-voltage parts.
6. Push the nylon standoff into
the mounting hole.
Mount the WiFi module and
make sure it snaps into place.
2. Unscrew all four screws.
Warning: Never open the unit
with power plugged in.
3. Remove the cover plate
using the T10 screwdriver and
the plier. Save the screws and
nuts.
7. Connect the antenna cable
to the WiFi module.
8. Put the top back on and
fasten all four screws.
Scan the QR code for an
installation video guide.
FCC ID: 2ACSVHF-LPD100
Wireless Solution Sweden AB, Majorebergsvägen 2
451 75 Uddevalla, Swedem
9. Power the unit up and start
the W-DMX Congurator app.
Make sure your app is of
version 1.2.0 or later.
Connect to the device and
chose to update rmware.
If the app tells you there is no
new rmware, choose to install
anyway.
After the update is nished,
your device is ready to use.

Termékspecifikációk

Márka: Wireless Solution
Kategória: TV antenna
Modell: WiFi upgrade for G6

Szüksége van segítségre?

Ha segítségre van szüksége Wireless Solution WiFi upgrade for G6, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók TV antenna Wireless Solution

Útmutatók TV antenna

Legújabb útmutatók TV antenna