Használati útmutató WilTec 50921

WilTec Vízszivattyú 50921

Olvassa el alább 📖 a magyar nyelvű használati útmutatót WilTec 50921 (6 oldal) a Vízszivattyú kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/6
Operation Manual
Pool Pump
SPP150E, SPP200E, SPP250E
50919, 50920, 50921
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
https://www.XPOtool.com Item 50919–50921 Page 2
The Tool Experts
08 2022-1
The information contained in this document may alter at any time without previous notice. It is prohibited
to copy or spread any parts of this document in any way without prior written allowance. All rights re-
served.
The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this
operating manual, nor in the diagrams and figures shown.
Even though, the WilTec Wildanger Technik GmbH has undergone biggest possible efforts to ensure
that the operating manual complete, faultless, and up to date, mistakes cannot be entirely avoided.is
If you should find a mistake or wish to make a suggestion for improvement, we look forward to hearing
from you.
Send an e-mail to:
service@wiltec.info
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in various languages can be found in our online shop via:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler
Germany
To return orders for exchange, repair, or other purposes, please use the following address. Attention!
To allow for a smooth execution of your complaint or return, it is important to contact our customer
service team before returning the goods.
Returns Department
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
E-mail: service@wiltec.info
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15
https://www.XPOtool.com Item 50919–50921 Page 3
The Tool Experts
08 2022-1
Introduction
Thank you for purchasing this quality product. To minimise the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Features
• Pump body, pump cover and impeller are made of high-quality plastic
• Big outlet, high lift, low noise
• Good mechanical seal and durable.
• With over load protection to ensure long lasting working
• With simple suction and discharge pipes.
Application
These water pumps are designed for the circulation and filtration of the small swimming pools (family
use), whirl pools and Sauna pools.
Caution!
• For swimming pools and garden ponds and its protection zone, the use of the pump is only in
permitted with fault current circuit breaker ( according to DIN VDE 100 part 06.92. 30 mA) 702
Please contact a qualified electrician if you have any questions.
• Keep a safe distance to the pool and fix the pump on a stable base plate According to VDE .
standard is observed a safety distance of 2 m.
• The pump has a built- motor protection switch We do not take over any liability for losses in .
through unsuitable use or faulty assembly. The power cable must conform to standards (2) EC
or type H07 RN- according to VDE 0620.the F
Checks before start-up
1. Make sure that the voltage and frequency power supply and pump (see nameplate) are suit-of
able.
2. Make sure that the pump shaft may rotate freely.
3. Fill the pump with water to make sure that the pump body, filter basket, pipes and other con-
nectors are not leaking. Tighten or loose the screws with hands, or tolls if necessary.
4. Open any existing valves pressure and suction lines check that all hoses are connected.in and
5. Please fill the suction pipe and the pump body completely with water.
6. The pump is suitable for clean water with a temperature of max. 35 ℃.
Power supply
Use the pump only on a three-pole socket with 230 V/ . 50 Hz

Termékspecifikációk

Márka: WilTec
Kategória: Vízszivattyú
Modell: 50921

Szüksége van segítségre?

Ha segítségre van szüksége WilTec 50921, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Vízszivattyú WilTec

WilTec

WilTec 63910 Útmutató

26 Augusztus 2024
WilTec

WilTec 50967 Útmutató

25 Augusztus 2024
WilTec

WilTec 50453 Útmutató

25 Augusztus 2024
WilTec

WilTec 52007 Útmutató

25 Augusztus 2024
WilTec

WilTec 50965 Útmutató

25 Augusztus 2024
WilTec

WilTec 50266 Útmutató

25 Augusztus 2024
WilTec

WilTec 50268 Útmutató

25 Augusztus 2024
WilTec

WilTec 51541 Útmutató

25 Augusztus 2024
WilTec

WilTec 50921 Útmutató

25 Augusztus 2024
WilTec

WilTec 51561 Útmutató

25 Augusztus 2024

Útmutatók Vízszivattyú

Legújabb útmutatók Vízszivattyú

Grundfos

Grundfos DPI Útmutató

1 Április 2025
Little Giant

Little Giant PE-1-PCP Útmutató

1 Április 2025
Grundfos

Grundfos Unilift APG40 Útmutató

1 Április 2025
Grundfos

Grundfos E-Box 200 Útmutató

1 Április 2025
Oase

Oase OptiMax 1150 Útmutató

29 Március 2025
Stanley

Stanley SXUP750PTE Útmutató

28 Március 2025
Gardena

Gardena 6500 SilentComfort Útmutató

12 Január 2025
Sunnydaze Decor

Sunnydaze Decor 132397 Útmutató

3 Január 2025
Sunnydaze Decor

Sunnydaze Decor 132396 Útmutató

3 Január 2025
Sunnydaze Decor

Sunnydaze Decor F921 Útmutató

3 Január 2025