Használati útmutató White Knight WKCD40

White Knight Ventilator WKCD40

Olvassa el alább 📖 a magyar nyelvű használati útmutatót White Knight WKCD40 (5 oldal) a Ventilator kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/5
WKCD40 ELECTRIC FAN
IMPORTANT INSTRUCTIONS
1. Read all instructions carefully before you use the appliance.
2. Remove the packaging and ensure that the appliance is undamaged. In case
of doubt do not use the fan and contact your supplier.
3. Do not let children play with parts of the packaging (such as plastic bags).
4. Before plugging the fan into the socket, check that the voltage of your mains
supply matches the voltage marked on the rating label of the appliance.
5. Before assembling or dismantling the fan, ensure that the fan is unplugged.
6. Before unplugging the supply cord, turn off the switch at the socket outlet.
7. Do not insert any object into the guard while the fan is operating.
WARNING: RISK OF INJURY.
8. The fan is meant for use in temperate climates. Do not use the fan in high
humidity or a dusty area.
9. Do not hang any clothes on the fan guards.
10. Do not use the fan outdoors.
INSTRUCTION MANUAL
Description of Parts
Caution
This appliance is for household use only. Any servicing other than cleaning
and user maintenance should be performed by an authorised service
representative. Do not immerse the unit in water. To reduce the risk of fire or
electric shock, do not remove the housing. The fan has no user serviceable parts
inside. Only authorised service personnel should handle repair work.
If the supply cord is damaged, it must be replaced by the manufacturer or its
service agent or a similar qualified person in order to avoid a hazard.
Assembly of the base
1. Remove the base mounting nut from the stand
by turning it anti-clockwise.
2. Feed the supply cord through the opening in
the base.
3. Insert the stand into the base and tighten the
base mounting nut clockwise
4. Lead the supply cord through the recess at
the side of the base.
Assembly of the fan
1. Remove the blade cap from the motor shaft and remove the guard lock nut
from the motor body.
2. Fit the rear guard to the motor body, by positioning on the location pins.
Secure the guard to the motor body with the guard lock nut.
3. Push the fan blade onto the motor shaft by matching the slots on the base of
the fan blade with the shaft pin. Secure the blade with the blade cap, turning
it in an anti-clockwise direction. Check that the fan blade rotates freely by
turning it with your hand.
4. Open the securing clip at the bottom of the front guard and loosen the clip
screw. Position the top clip on the uppermost part of the rear guard. Push
the top clip down and press rim of the front guard onto the rear guard.
Close the bottom clip and tighten the screw.
Operations
1. 3-Step Speed Control
OFF 0
LOW 1
MEDIUM 2
HIGH 3

Termékspecifikációk

Márka: White Knight
Kategória: Ventilator
Modell: WKCD40

Szüksége van segítségre?

Ha segítségre van szüksége White Knight WKCD40, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Ventilator White Knight

White Knight

White Knight WKCD40 Útmutató

21 Július 2024

Útmutatók Ventilator

Legújabb útmutatók Ventilator

Innoliving

Innoliving INN-532 Útmutató

9 Április 2025
Innoliving

Innoliving INN-531 Útmutató

9 Április 2025
Innoliving

Innoliving INN-533 Útmutató

8 Április 2025
Broan

Broan Ultra Pro RB110L1 Útmutató

3 Április 2025
Broan

Broan QTXE110S Útmutató

2 Április 2025
Broan

Broan Ultra Pro RB110 Útmutató

2 Április 2025
Fantini Cosmi

Fantini Cosmi ASPIRKAPPA Útmutató

2 Április 2025
Broan

Broan L300KMG Útmutató

2 Április 2025
RYOBI

RYOBI RY40HF02 Útmutató

2 Április 2025
Vornado

Vornado Strata 8T Útmutató

1 Április 2025