Használati útmutató White Knight wk 1200 e

White Knight mosógép wk 1200 e

Olvassa el alább 📖 a magyar nyelvű használati útmutatót White Knight wk 1200 e (29 oldal) a mosógép kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/29
WASHING MACHINE
USER MANUAL
THE CONTENTS
SECTION 1:BEFORE USE
Safety warnings
Recommendations
SECTION 2:INSTALLATION
Removal of transportation screws
Foot adjustment
Electrical connection
Water supply connection
Drain connection
SECTION 3:TECHNICAL SPECIFICATIONS
SECTION 4:CONTROL PANEL
Start/Pause button
Function indicator lights
Function buttons
Spin speed selector
Program knob
Washing Programs
SECTION 5:WASHING YOUR LAUNDRY
Before washing
Running the machine
SECTION 6:MAINTENANCE AND CLEANING
Water inlet filters
Pump filter
Detergent drawer
Siphon plug
The cabinet
The drum
Limescale removal
SECTION 7: PRACTICAL INFORMATION
SECTION 8:AVOIDING MINOR FAULTS
SECTION 9:AUTOMATIC FAILURE DETECTION SYSTEM
SECTION 10:INTERNATIONAL WASHING SYMBOLS
1
SECTION 1:BEFORE USE
SAFETY WARNINGS
Do not use a multiple socket or extension cable.
Do not connect a plug with a damaged cord to a socket.
If the cord is damaged it should be replaced by the manufacturer or
appointed service agent in order to avoid a hazard.
Never remove the plug from the socket by pulling the cord section.
Remove the plug only by gripping the plug itself.
Do not plug the machine to the power supply with wet hands.
Never touch the machine with wet hands or feet.
Never open the detergent drawer while the device is running.
Never force open the door of the machine whilst the machine is
running.
The machine can reach high temperatures while running, so do not
touch the drain hose and water during the draining cycle.
In the event of any failure, first unplug the appliance and close off the
water tap. Do not attempt to repair. Please contact your authorised
service agent.
Keep the packing materials from your machine away from children to
avoid hazards.
Do not let your children play with the washing machine.
Keep pets away from your machine.
Your machine should only be used by adults, and in accordance with
the information written in this manual.
Your machine is designed for use in a domestic environment. The
warranty will be invalid if you use it for commercial purposes.
The appliance should not be put on a carpet which can block the air
ventilation on the bottom side.
RECOMMENDATIONS
Detergent or fabric softener in contact with air for a long time can dry
out and stick to your detergent drawer. To avoid this, put your
detergent and softener into the detergent drawer just before washing.
It is recommended that you use pre-washing program for only very
dirty clothes.
Please do not exceed the maximum loading capacity.
The appliance is not intended for use by people (including children)
with reduced physical,sensory or mental capabilities, or lack of
experience and knowledge , unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety. Children should be supervised to ensure
that they don’t play with the appliance.
2
If you plan not to use your machine for a long time, unplug it, shut off
the water supply, and leave the door open in order to keep the inside
of the machine dry and to prevent unpleasant odours in the drum.
As a result of our quality control procedures, a certain amount of
water may remain in your machine from testing. This is not harmful
for your machine and is perfectly normal.
SECTION 2: INSTALLATION
Please pay attention to the following issues before using your washing
machine for the first time.
REMOVAL OF TRANSPORTATION SCREWS
Transportation screws, which are located at the back side of the
machine, must be removed before running the machine.
Loosen the screws by turning them anticlockwise with a suitable
spanner. (DIAGRAM-1)
Pull out the screws and rubber washers .(DIAGRAM-2)
The holes where the transport screws have been removed should be
covered with the plastic transport caps found in the accessories bag.
(DIAGRAM-3)
The transportation screws that have been removed from the machine
must be re-used in any future transporting of the machine.
DIAGRAM-2
DIAGRAM-1 DIAGRAM-3
FOOT ADJUSTMENT
Do not install your machine on rugs or similar surfaces.
For your machine to work silently and without any vibration, it should
be installed on a flat, non-slippery firm surface. Any suspended floor
must be suitably strengthened.
3
You can adjust the level of your machine using its feet.
First, loosen the plastic adjustment nut away from the cabinet base.
Change the level by adjusting the feet upwards or downwards.
After level has been reached, tighten the plastic adjustment nut again
by rotating it upwards against the base of the cabinet.
Never put cartons, wooden blocks or similar materials under the
machine to balance irregularities of the floor.
ELECTRICAL CONNECTION
Your washing machine requires a 50Hz supply of 220-240Volts.
A special earthed plug has been attached to the supply cord of your
washing machine. This plug must be fitted to an earthed socket. The
fuse value fitted to this plug should be 13 amps. If you have any
doubts about your electrical supply, consult a qualified electrician.
THIS APPLIANCE MUST BE EARTHED.
Insert the machine’s plug to a grounded socket which you can
easily reach.
WATER SUPPLY CONNECTION
Your machine is supplied with a single (cold) water inlet.
To prevent leakage from the connection joints, a rubber washer is
included in the hose packing. Fit this washer at the end of water inlet
hose on the tap side.
Connect the hose to the water inlet valve. Tighten the plastic
connector by hand.Please call a qualified plumber if you are unsure
about this.
4
Water pressure of 0,1-1 MPa from your tap will enable your machine
to work more efficiently.(0,1 MPa pressure means water flow of more
than 8 litres in 1 minute from a fully opened tap)
After connection is complete, check for leakage by turning on your
tap completely.
Make sure that water inlet hoses can not become folded, damaged,
stretched or crushed when the washing machine is in its final
position.
Mount the water inlet hose to a ¾” threaded water tap.
Cold water inlet (White filter valve)
DRAIN CONNECTION
Make sure that water inlet hoses are not folded, twisted, crushed or
stretched.
The drain hose should be mounted at a minimum height of 60 cm,
and a maximum height of 100 cm from the floor.
The end of the drain hose can be connected directly to a drainage
stand-pipe or alternatively to a specific connection point designed for
that purpose on the waste outlet of a sink unit.
Do not extend the drain hose or your guarantee will be invalidated.
5
SECTION 3:TECHNICAL SPECIFICATIONS
WK1200Y WK1400Y
Maximum dry
laundry
capacity (kg)
6 6
Recommended
loading (kg) 5,5 5,5
Height (cm) 85 85
Width (cm))59,6 59,6
Depth (cm) 54 54
Maximum spin
cycle ( rpm ) 1200 1400
(*) Maximum spin cycles depend on the model you’ve chosen
.
6
SECTION 4:
CONTROL PANEL
WK1400Y
1 2 3 4 5 6
7 8 9
1-Detergent drawer 6-Program knob
2-Start/pause light 7-Start/pause button
3-Function indicator lights 8-Function buttons
4-Spin speed selector 9-Program end light
5-Program ready light
WK1200Y
1 2 3 4 5 6
7 8 9
1-Detergent drawer 6-Program knob
2-Start/pause light 7-Start/pause button
3-Function indicator lights 8-Function buttons
4-Spin speed selector 9-Program end light
5-Program ready light
Our product has electronic card and soft-touch buttons.To activate the
functions press the buttons gently.
7
START/PAUSE BUTTON
Used to start a selected program or pause during running.
WARNING!
The program knob must be brought to O(off) position before
selecting the program or changing an existing program.
FUNCTION INDICATOR LIGHTS
When the start/pause button or any function button is pressed,the
corresponding light turns on.The light turns off when the function
button or start/pause button is re-pressed, or when the process
or selected function is completed.
The function indicator lights are also used in the failure detection system
detailed in section 9.
FUNCTION BUTTONS
Rinse hold
This function is recommended to be used when the clothes cannot
be removed immediately after the end of the program.This will
prevent creasing. When this button is pressed, the last rinsing
water is not drained. For the program to continue after this,
repress the same button.
If you do not want your sensitive clothes to be spun or you
want them to spin gently, turn the program knob to O (off) position.
Turn the program knob to the draining or spinning program you
desire and press the start/pause button. If the program you have
selected is a drain program, your machine will drain the water. If
you have selected a spinning program, your machine will perform a
spinning operation and then end the program.
Extra rinse
Provides one additional rinse in addition to the rinses which your
machine washing program normally uses.
Easy ironing
By using this function, you clothes will come out
less wrinkled after washing.
8
WARNING!
Functions vary depending on the model you have chosen.If you
forgot to use additional function and your machine starts to wash
push the additional function button if the indicator light is on.
Additional function will be activated.If the indicator light is not
on,additional function will not be activated.
OPTION COMPATIBILITIES
Rinse
Hold
Extra
Rinse
Easy
Ironing
Rinse
Hold YES NO
Extra
Rinse YES
Easy
Ironing
SPIN SPEED SELECTOR
Using the spin speed selector knob, you can adjust the spin speed for your
clothes load.The speed adjustment interval is between O (No spin) and the
maximum spinning speed of your machine.
NOTE: Spin speed should be adjusted to protect your sensitive and delicate
clothes
9
PROGRAM KNOB
With the program knob, you can select the program with which you wish to
wash your clothes. You can adjust the program selection process by turning
the program knob in both directions. You must be careful that the adjustment
sign of the program knob is exactly on the program you want to select. When
you bring the program knob to O(off) position, while your machine is running,
your program will remain incomplete.
10
Washing Programs
MAX DRY LOAD CAPACITY (kg)
PROGRAM DETERGENT
COMPART. WK1200Y WK1400Y
TYPE OF LA
1-COTTON 90 26 6 Dirty, boil, cotton
textile
2-COTTON 60
(PREWASH) 1+2 6 6 Very dirty, cotton
and linen textile
**3-COTTON 60 26 6 Dirty, cotton, col
linen textile
4-COTTON 40 26 6
Slightly dirty, pai
out, cotton, colo
linen textile
5-ECO
WASH 26 6 Dirty, cotton, col
linen textile
6-COTTON 30 26 6 Slightly dirty, cot
coloured and line
7-QUICK WASH 2 3 3 Slightly dirty, cot
coloured and line
8-COTTON
COLD 26 6
Slightly dirty cott
coloured and line
Washed without
tap water.
9-MIX
WASH 26 6
Dirty or very dirty
cotton, coloured
textile
10-SYNTHETIC 60 23 3 Dirty, synthetic o
mixture textile
11-BABY
WASH 23 3 Baby laundry
12-SYNTHETIC 40 23 3 Slightly dirty, syn
synthetic mixture
TABLE-1
11
MAX DRY LOAD CAPACITY (kg)
PROGRAM DETERGENT
COMPART. WK1200Y WK1400Y
TYPE OF LAUNDRY
13-SPORT
CLOTHES 23 3 Sport clothes
14-SYNTHETIC
COLD 23 3
Slightly dirty, synthetic or
synthetic mixture sensitiv
laundry.Washed without
heating the tap water.
15-CURTAIN
WASH 1+2 2 2 Tulle and curtain as
sensitive laundry
16-DELICATE 30 22 2
Slightly dirty, cotton,
coloured, synthetic or
synthetic mixture sensitiv
laundry
17-DELICATE
COLD 22 2
Very slightly dirty, cold
water with to wash cotton
coloured, synthetic or
synthetic mixture sensitiv
laundry
18-HAND
WASH 22 2
Slightly dirty, wash in han
cotton, coloured, synthetic
or synthetic mixture laund
19-WOOL 30 22 2 Dirty, hand and machine t
wash wool laundry
20-WOOL COLD 2 2 2
Very slightly dirty, cold
water, hand and machine
wash wool laundry
RINSING When you need an additional rinsing to be done to your clothes after the washing process, you can use this progra
SPINNING When you need an additional spinning to be done to your clothes after the washing process, you can use this prog
clothes.
DRAINING This program is used to drain the dirty water inside after the washing process of your machine. If you want the wa
be drained before the program ends, you can use this program.
TABLE-1 CONTINUE
(*) You can use softeners in all programs (except spinning and draining programs) optionally. When you arrange the quantity of the softener, co
the softener producer. Fill your softener in its (softener) compartment of the detergent drawer.
** Energy label data based on programme tested in accordance with EN60456.
12
SECTION 5: WASHING YOUR LAUNDRY
Plug in the machine to the electrical supply.
Connect hoses to water supply and to drain.
First wash cycle
There may be water left inside your machine after factory testing. It is
recommended that the first wash cycle should be made without any laundry to
remove this water; pour half a measuring cup of normal all purpose detergent
into compartment 2 and select cotton program at 90°C.
BEFORE WASHING
Sorting your laundry
Sort your clothes according to their types (cotton, synthetic, sensitive,
woollen, etc.),washing temperatures and level of dirtiness.
Never wash your white and coloured clothes together.
Since your new coloured clothes may shed dye on the first wash,
wash them separately.
Be careful that no metal parts are found on or in the pockets of your
clothes, remove if there are any.
Zip up and/or button up your clothes.
Remove plastic or metal hooks from curtains or place them inside a
washing bag and tie.
Pull items like trousers,knitted fabrics, t-shirts and sweat shirts inside
out.
Wash small clothes like socks and handkerchiefs in a washing bag.
Wash up to 90C Wash up to 60 C Wash up to 30 C Not washable in 
washing machine
Placing clothes into the machine
Open the door of your machine.
Load your clothes into your machine in an even manner.
Load each item separately.
When you shut the door of your machine, be careful that no cloth is
jammed between the cover and the gasket.
Shut the door of your machine tightly otherwise your machine will not
start the washing process.
Loading detergent into the machine
The quantity of the detergent that you will put in your machine depends on the
following criteria:
Your detergent consumption will change according to the dirtiness
of your clothes. For slightly dirty clothes, do not pre-wash and put a
small amount of detergent in the compartment no.2 of the detergent
drawer.
13

Termékspecifikációk

Márka: White Knight
Kategória: mosógép
Modell: wk 1200 e

Szüksége van segítségre?

Ha segítségre van szüksége White Knight wk 1200 e, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók mosógép White Knight

White Knight

White Knight WM105VB Útmutató

27 Március 2025
White Knight

White Knight WM106V Útmutató

14 Augusztus 2024
White Knight

White Knight wk 1200 e Útmutató

1 Augusztus 2024
White Knight

White Knight WM126VB Útmutató

22 Július 2024
White Knight

White Knight WM127VB Útmutató

20 Július 2024
White Knight

White Knight WK1400Y Útmutató

15 Július 2024
White Knight

White Knight WM126V Útmutató

13 Július 2024
White Knight

White Knight WK 1400E Útmutató

9 Július 2024
White Knight

White Knight WM126M Útmutató

7 Július 2024

Útmutatók mosógép

Legújabb útmutatók mosógép

Whirlpool

Whirlpool AWO 174S3 - 6TH SENSE InfiniteCare Útmutató

3 Április 2025
Zanussi

Zanussi ZWF1112W Útmutató

3 Április 2025
Indesit

Indesit iwc 6165 Útmutató

3 Április 2025
Electrolux

Electrolux ew 1677 f Útmutató

3 Április 2025
Whirlpool

Whirlpool AWO 9476 Útmutató

3 Április 2025
Fagor

Fagor 2F2609 Útmutató

3 Április 2025
Whirlpool

Whirlpool AWOC 9253 Útmutató

3 Április 2025
Marynen

Marynen Dukaat Útmutató

3 Április 2025
Miele

Miele WXF 660 WCS W1 Útmutató

3 Április 2025
Whirlpool

Whirlpool awm 8143 Útmutató

2 Április 2025