Használati útmutató Weidmüller IE-CST-2TX-2RS232/485

Weidmüller nincs kategorizálva IE-CST-2TX-2RS232/485

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Weidmüller IE-CST-2TX-2RS232/485 (105 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/105

Industrial Serial to Ethernet Converter

User Manual for

IE-CS-2TX-1RS232/485

IE-CST-2TX-1RS232/485

IE-CS-2TX-2RS232/485

IE-CST-2TX-2RS232/485

First Edition, June 2011

1243270000/00/06.11

User Manual IE-CS(T)-2TX-xRS232/485

The software described in this manual is furnished under a license agreement and may be used only in accordance with

the terms of that agreement.

Reproduction without permission is prohibited.

Disclaimer

Information in this document is subject to change without notice and does not represent a commitment on the part of

Weidmüller.

Weidmüller provides this document as is, without warranty of any kind, either expressed or implied, including, but not

limited to, its particular purpose. Weidmüller reserves the right to make improvements and/or changes to this manual, or

to the products and/or the programs described in this manual, at any time.

Information provided in this manual is intended to be accurate and reliable. However, Weidmüller assumes no

responsibility for its use, or for any infringements on the rights of third parties that may result from its use.

This product might include unintentional technical or typographical errors. Changes are periodically made to the

information herein to correct such errors, and these changes are incorporated into new editions of the publication.

Contact Information

Weidmüller Interface GmbH & Co. KG

Postfach 3030

32760 Detmold

Klingenbergstraße 16

32758 Detmold

Germany

Phone +49 (0) 5231 14-0

Fax +49 (0) 5231 14-2083

E-Mail info@weidmueller.com

Internet www.weidmueller.com

Table of Contents

1. Introduction..........................................................................................................................................1

Overview ..............................................................................................................................................2

Package Checklist ..................................................................................................................................2

Product Features ...................................................................................................................................2

Product Specifications ............................................................................................................................3

2. Getting Started .....................................................................................................................................1

Panel Layout .........................................................................................................................................2

Connecting the Hardware .......................................................................................................................2

Wiring Requirements ......................................................................................................................3

Connecting the Power .....................................................................................................................3

Connecting to the Network .............................................................................................................. 4

Connecting to a Serial Device .......................................................................................................... 4

LED Indicators ...............................................................................................................................4

Adjust the Pull-high/Pull-low Resistors and Terminators for RS-422/RS-485 Ports .................................. 4

3. Initial IP Address Configuration............................................................................................................1

Initializing the IE-CS(T)-2TX-xRS232/485’s IP Address ..............................................................................2

Factory Default IP Address...................................................................................................................... 2

S/E-Converter Administrator ...................................................................................................................2

Telnet Console ......................................................................................................................................3

Serial Console (19200, n, 8, 1)................................................................................................................5

4. Choosing the Proper Operation Mode ....................................................................................................1

Overview ..............................................................................................................................................2

Real COM Mode .....................................................................................................................................2

RFC2217 Mode ......................................................................................................................................3

TCP Server Mode ...................................................................................................................................3

TCP Client Mode ....................................................................................................................................3

UDP Mode.............................................................................................................................................4

Pair Connection Mode............................................................................................................................. 4

Ethernet Modem Mode............................................................................................................................ 4

Reverse Telnet Mode..............................................................................................................................4

Disabled Mode.......................................................................................................................................5

5. Web Console Configuration ...................................................................................................................1

Opening Your Browser............................................................................................................................2

Export/Import ....................................................................................................................................... 5

Basic Settings ....................................................................................................................................... 5

Network Settings ...................................................................................................................................6

SNMP Settings ...............................................................................................................................8

IP Address Report ..........................................................................................................................9

Serial Settings.......................................................................................................................................9

Serial Parameters......................................................................................................................... 10

Operating Settings ............................................................................................................................... 11

Real COM Mode............................................................................................................................ 11

RFC2217 Mode............................................................................................................................. 14

TCP Server Mode .......................................................................................................................... 16

TCP Client Mode ........................................................................................................................... 19

UDP Mode ................................................................................................................................... 23

Pair Connection Mode ................................................................................................................... 25

Ethernet Modem Mode .................................................................................................................. 27

Reverse Telnet Mode .................................................................................................................... 29

Disabled Mode ............................................................................................................................. 30

Accessible IP Settings .......................................................................................................................... 31

Auto Warning Settings.......................................................................................................................... 32

Auto warning: Email and SNMP trap ............................................................................................... 32

Event Type .................................................................................................................................. 33

Upgrade Firmware ............................................................................................................................... 35

Monitor .............................................................................................................................................. 35

Monitor Line ................................................................................................................................ 35

Monitor Async .............................................................................................................................. 36

Monitor Async-Settings ................................................................................................................. 36

Monitor Relay Output .................................................................................................................... 37

Change Password ................................................................................................................................ 37

Load Factory Default ............................................................................................................................ 38

Save/Restart....................................................................................................................................... 38

6. Configuring S/E Converter Administrator..............................................................................................1

Overview ..............................................................................................................................................2

Installing S/E-Converter Administrator .....................................................................................................2

Configuration ........................................................................................................................................4

Broadcast Search ...........................................................................................................................4