Használati útmutató Wavtech bassFREQ

Wavtech audio/videó-konverter bassFREQ

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Wavtech bassFREQ (8 oldal) a audio/videó-konverter kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/8
www.wavtech-usa.com
Owner’s Manual
Bass Processor / LOC / Line Driver
Parametric EQ Ÿ24dB/Oct Crossover ŸRemote Level Control
• Any function that requires your prolonged attention should not be performed DO NOT DRIVE WHILE DISTRACTED.
while driving. Always stop the vehicle in a safe location before performing any such function. Failure to do so may
result in an accident.
• KEEP THE VOLUME AT MODERATE LEVELS WHILE DRIVING. Excess volume levels can obscure sounds such as
emergency vehicle sirens or road warning signals and may result in an accident. Continuous exposure to high sound
pressure levels may cause permanent hearing loss. Use common sense and practice safe sound.
• FOR USE WITH 12V NEGATIVE GROUND VEHICLE APPLICATIONS ONLY. Using this product other than in its
designed application may result in fire, injury or product damage.
• MAKE THE CORRECT WIRING CONNECTIONS AND USE PROPER FUSE PROTECTION. Failure to connect wiring
correctly or use appropriate fuse protection may result in fire, injury or product damage . Ensure proper fusing of all
system power wiring and install a 1-ampere in-line fuse (not included) with the +12V lead to the unit’s power supply
connector.
• DISCONNECT THE NEGATIVE BATTERY TERMINAL BEFORE INSTALLATION. Failure to do so may result in fire,
injury or damage to the unit.
• D O NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS. Arrange wiring and cables to
prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as steering wheel, brake
pedals, etc. can be extremely hazardous.
• DO NOT DAMAGE VEHICLE SYSTEMS OR WIRING WHEN DRILLING HOLES. When drilling holes in the chassis for
installation, take precautions so as not to contact, puncture or obstruct brake lines, fuel lines, fuel tanks, electrical
wiring, etc. Failure to take such precautions may result in fire or an accident.
• DO NOT UTILIZE OR CONNECT TO ANY PART OF VEHICLE SAFETY SYSTEMS. Bolts, nuts or wires used in the
brake, airbag, steering or any other safety-related systems or fuel tanks should NEVER be used for mounting, power or
ground connections. Using such parts may disable control of the vehicle or result in fire.
WARNING
WARNING This symbol means important instructions.
Failure to heed them can result in serious injury or death.
CAUTION This symbol means important instructions.
Failure to heed them can result in injury or property damages.
• STOP USE IMMEDIATELY IF A PROBLEM OCCURS. Failure to do so may result in personal injury or damage to the
product. Return it to your authorized Wāvtech dealer.
• HAVE AN EXPERT DO THE WIRING AND INSTALLATION. This unit requires special technical skill and experience for
wiring and installation. To insure safety and proper function, always contact the authorized dealer where you
purchased the product to have it done professionally.
• INSTALL THE UNIT SECURELY WITH SPECIFIED PARTS. Be sure to use only the included parts and specified
installation accessories (not included). Use of other than designated parts may damage this unit. Install the unit
securely so that it will not come loose during a collision or sudden jolt.
• ROUTE WIRING AWAY FROM SHARP EDGES AND MOVING PARTS. Arrange cables and wiring away from sharp or
pointed edges and avoid moving parts such as seat hinges or rails to prevent pinching or wear. Use loom protection
where appropriate and always use a grommet for any wiring routed through metal.
• NEVER RUN SYSTEM WIRING OUTSIDE OR UNDERNEATH THE VEHICLE. All wiring must be routed, secured and
protected inside the vehicle. Failure to do so may result in fire, injury or property damage.
• INSTALL THE UNIT IN A DRY AND VENTILATED LOCATION. Avoid mounting locations where the unit will likely be
exposed to high moisture or heat without adequate ventilation. Moisture penetration or heat buildup may result in
product failure.
• REDUCE GAIN AND SOURCE VOLUME TO MINIMUM LEVELS FOR INITIAL SYSTEM TUNING AND BEFORE
CONNECTION TO AN AMPLIFIER. Ensure amplifier power is off before connecting RCA cables and follow proper
system gain setting procedure. Failure to do so may result in damage to the amplifier and/or connected components.
CAUTION
Package Contents:
Main Unit Terminals
(2pcs, detachable)
Accessories Required for
Installation :(not included)
Mounting Tabs
(2pcs, detachable)
ŸRCA Interconnects
Ÿ18AWG Wire
ŸIn-line Fuse Holder w/1A fuse
ŸBattery Ring Terminal
ŸGround Terminal
ŸWire Crimp Connectors
ŸGrommets and Loom
ŸCable Ties
ŸMounting Screws
1
Remote Level Control
Remote Cable
(16.4ft / 5m)
Introduction
Welcome to Wāvtech, exceptional mobile audio integration products for audiophiles. Our products are
engineered to provide a truly remarkable listening experience. Built for the professional installer, our
OEM integration and signal processor models are simply the best solution available for unlimited sound
system upgrades while retaining the factory receiver.
ΠPower Indicator: This red LED indicates when the bassFREQ is powered on. Once illuminated, there
will be a short delay before audio signal output is enabled. During initial power connections, it may
illuminate for a brief period.
Ground Jumper: For selecting between chassis, isolation or 200Ω for the internal audio signal ground.
Chassis ground is the default setting and ideal for most applications due to the differential input
stage. In the rare case there is system noise present after all other installation countermeasures,
changing this jumper to ISO or 200Ω may reduce or eliminate the noise.
ŽPower Supply Terminal: For +12V battery, chassis ground, remote input and remote output wire
connections. A minimum of 18AWG wire is recommended for power and ground connections. Always
protect the +12V power wire with a 1-amp fuse.
Speaker Level Input Terminal: For left and right channel speaker level (a.k.a. high level) connections to
the source. Input signals ranging from 2Vrms to 20Vrms will produce up to 10Vrms RCA output at
maximum to minimum gain setting. Dynamic music signal peaks are allowable up to 40Vrms, but will
be clipped. Use this input if your source unit does not have RCA outputs.
RCA Input Jacks: For left and right channel low level (a.k.a. line level) signal connections to the source
unit. These two channels are summed and processed internally in mono. Input signals ranging from
0.5Vrms to 5Vrms will produce up to 10Vrms RCA output at maximum to minimum gain setting.
‘Remote Level Control Jack: This RJ45 jack is for connecting the supplied cable to the external level
control unit for remote mounting. A standard ethernet cable may also be used.
’RCA Output Jacks: These mono line level outputs are for signal connection to your amplifier(s). Each
output is an independent internal circuit, both capable of driving multiple amplifiers simultaneously.
Use quality interconnects to ensure stable connection and minimize the possibility for induced noise.
“Mounting Tabs: These mounting tabs are pre-attached and should be used to properly secure the
bassFREQ during installation with screws or cable ties. They are removable if the unit can be safely
secured by another method.
Connections & Functions
Features
ŸBass Enhancement Processor
Fully Adjustable Parametric EQ
Variable Subsonic Filter (-24dB/Oct.)
Variable Low Pass Filter (-24dB/Oct.)
Variable Gain with Clip LED
Remote Level Control
ŸLine Output Converter or Line Driver
ŸDifferential Balanced Inputs
Ÿ Low Impedance Dual Mono Drive Outputs
ŸAuto Turn-On via DC-Offset or Audio Signal Detect
ŸGenerated +12V Remote Output
ŸOEM Load Detect Compatible
ŸSelectable Ground Isolation
ŸProfessional Grade Panel Mount RCA Output Jacks
ŸDetachable Power and Speaker Input Terminals
ŸAluminum Chassis w/Detachable Mounting Tabs
Œ
Ž 
‘
’
“
2

Termékspecifikációk

Márka: Wavtech
Kategória: audio/videó-konverter
Modell: bassFREQ

Szüksége van segítségre?

Ha segítségre van szüksége Wavtech bassFREQ, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók audio/videó-konverter Wavtech

Wavtech

Wavtech bassFREQ Útmutató

24 Augusztus 2024
Wavtech

Wavtech LinkD Útmutató

24 Augusztus 2024
Wavtech

Wavtech Link4 Útmutató

24 Augusztus 2024
Wavtech

Wavtech Link8 Útmutató

24 Augusztus 2024
Wavtech

Wavtech link2 Útmutató

24 Augusztus 2024
Wavtech

Wavtech linkDQ Útmutató

24 Augusztus 2024
Wavtech

Wavtech link6 Útmutató

24 Augusztus 2024
Wavtech

Wavtech bassRESTOR Útmutató

24 Augusztus 2024
Wavtech

Wavtech LinkT Útmutató

24 Augusztus 2024
Wavtech

Wavtech linkQ Útmutató

24 Augusztus 2024

Útmutatók audio/videó-konverter

Legújabb útmutatók audio/videó-konverter

BZBGear

BZBGear BG-UHD-18GFE Útmutató

3 Április 2025
PureTools

PureTools PT-C-HDEARC-4K Útmutató

2 Április 2025
ATen

ATen VE170Q Útmutató

2 Április 2025
ATen

ATen VS1808T Útmutató

2 Április 2025
INOGENI

INOGENI U-BRIDGE 3 Útmutató

2 Április 2025
Sescom

Sescom SES-X-FA2LXBT01 Útmutató

2 Április 2025
Teradek

Teradek COLR Útmutató

29 Március 2025
Pengo

Pengo VideoSync Grabber Box Útmutató

29 Március 2025
Mean Well

Mean Well PSD-45B-24 Útmutató

26 Március 2025
Mean Well

Mean Well PSD-45C-12 Útmutató

26 Március 2025