Használati útmutató Watson VM-50-MI

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Watson VM-50-MI (6 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/6
Thank you for choosing Watson Pro
Please rea llowd and fo these in and st cti s,ru on
keep th is ma alnu in a fe .sa place
VM-50-MI
Micro V-Mount Li-ion Battery
SA ET INSTRUCTIONF Y S
Make sure the battery is fully charged before use.
When not in use, remove the battery from its device. Some
electronic equipment will draw current even when the switch
is off.
Do not short-circuit the terminals. This battery is protected
with an internal self-resetting fuse, but short circuits may still
cause severe damage to the battery.
Do not attempt to open the battery case under any
circumstances.
Do not remove the battery from any equipment that is
powered on. Always power off your equipment before
removing the battery.
Use the battery only under proper environmental conditions:
14°F to 122°F (-10°C to 50°C), and with a relative humidity
(RH) less than 85%.
Storage environment: short term (one month) -4F° to 104°
F (-20°C to 40°C) and RH 45% to 85%; medium term (three
months) -4°F to 86°F (-20°C to 30°C) and RH 45% to 85%; long
term (one year) -4°F to 77°F (-20°C to 25°C) and RH 45% to
85%.
The battery may be warm during use or recharging. This is
normal.
The battery should be charged up to 50% for long-term
storage. After 4 months of storage, the battery will require a
recharge up to 50%.
Keep the battery out of fire, heat, and high pressure.
Do not expose the battery to rain or moisture.
Do not drop the battery or expose it to strong shocks.
Keep this unit away from water and any flammable gases or
liquids.
Clean the battery and terminals with a clean, soft, and dry
cloth.
When operation time has noticeably decreased, the battery
may need to be replaced.
Keep this product away from children.
Store the battery in a cool, dry place.
All images are for illustrative purposes only.
PRODUC EATURET F S
Check button activates LCD screen and shows
remaining battery capacity and output voltage.
USB Standard-A, Type-C, and Micro-B ports to power
USB devices like laptop computers, smartphones,
tablets, and other portable devices.
D-tap output for powering cameras and accessories.
Built-in intelligent control circuit for protection
against damage caused by current, voltage,
temperature, or short-circuiting.

Termékspecifikációk

Márka: Watson
Kategória: nincs kategorizálva
Modell: VM-50-MI

Szüksége van segítségre?

Ha segítségre van szüksége Watson VM-50-MI, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Watson

Watson

Watson VM-98-MI Útmutató

21 December 2024
Watson

Watson C-NPF-4B Útmutató

21 December 2024
Watson

Watson C-AM-4E Útmutató

21 December 2024
Watson

Watson VM-230-SP Útmutató

21 December 2024
Watson

Watson C-VM-2E Útmutató

21 December 2024
Watson

Watson C-AM-2E Útmutató

21 December 2024
Watson

Watson VM-192-B Útmutató

21 December 2024
Watson

Watson C-VM-2C Útmutató

1 Szeptember 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva