Használati útmutató Watson C-NPF-4B

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Watson C-NPF-4B (4 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/4
Thank you for choosing Watson Pro
C-NPF-4B
4 Bay NP-F Battery Charger
Please read this user manual carefully and
keep it for reference before using the charger.
OVERVIEW
1. On/off button
2. Press the battery latch to remove the battery from the Battery latch:
bay.
3. Charging indicator:
Flashing red light: Charging in progress.
Steady red light: Battery is 95% charged. The remaining 5% is charged
in trickle mode.
Steady green light: Battery is fully charged.
Rapidly flashing red light: Battery is not attached correctly. Remove the
battery and reseat it so both contacts are plugged into the battery.
4. Battery bay
5. Displays the charging progress of the attached batteries. LED screen:
Note: The screen will display the word "Low" if a battery is not inserted
properly.
6. Use included USB-C power cable and power adapter USB-C power input:
to power the charger via the USB-C port.
7. Make sure the vent is not obstructed during Heat dissipation vent:
operation.
8. 1/4-20 mounting socket
9. Allows you to hang the charger out of the way, like on a Hanging eyelet:
hook or lanyard.
10. Make sure the fan is not covered or obstructed during operation.Fan:
11. Connect the charger to a power source, or insert USB-A power output:
at least one charged NP-F battery into one of the bays. Press and
hold the power button for two seconds to activate the USB-A port for
charging. Attach a USB charging cable to charge a device like a phone,
tablet, wireless transmitter, or Bluetooth headphones.
Note: You cannot charge batteries when the USB-A charging port is
active.
Aslo included: PD 65W Power adapter, USB-C power cable
SAFETY INSTRUCTIONS
Please read and follow these instructions, and keep this manual in a safe place.
Do not charge any battery other than the batteries specified in this manual.
Other types of batteries can burst, causing personal injury and damage.
Use only the correct, recommended voltage.
Do not attempt to disassemble or repair the charger -- doing so will void the
warranty, and Watson will not be responsible for any damage.
Make sure that this product is intact and that there are no missing parts.
Batteries may be warm during use or recharging. This is normal.
Do not expose the unit to rain or moisture.
Keep this unit away from water and any flammable gases or liquids.
Use this charger only in a well-ventilated area, and avoid using it in high-
temperature environments.
Unplug the charger from the AC outlet before attempting cleaning, and clean the
unit with a clean, soft, and dry cloth.
Keep this product away from children.
All images are for illustrative purposes only.
1
5
6
8
7
4
2
9
3
10 11

Termékspecifikációk

Márka: Watson
Kategória: nincs kategorizálva
Modell: C-NPF-4B

Szüksége van segítségre?

Ha segítségre van szüksége Watson C-NPF-4B, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Watson

Watson

Watson VM-98-MI Útmutató

21 December 2024
Watson

Watson C-NPF-4B Útmutató

21 December 2024
Watson

Watson C-AM-4E Útmutató

21 December 2024
Watson

Watson VM-230-SP Útmutató

21 December 2024
Watson

Watson C-VM-2E Útmutató

21 December 2024
Watson

Watson C-AM-2E Útmutató

21 December 2024
Watson

Watson VM-192-B Útmutató

21 December 2024
Watson

Watson C-VM-2C Útmutató

1 Szeptember 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva