Használati útmutató Wago 852-112

Wago Schakelaar 852-112

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Wago 852-112 (2 oldal) a Schakelaar kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/2
Fig. 1: Hutschiene (DIN Rail) 852-111
Fig. 2: 852-111
Fig. 3: 852-112
Installationsanleitung
852-111 / 852-112
1. Überblick
Die ETHERNET Switches 852-111 und 852-112 sind kompakte,
industrielle Geräte für die Montage auf der 35mm Hutschiene.
Diese Switches dienen zum Anschluss von Netzwerkkomponenten
an das ETHERNET unter industriellen Bedingungen.
852-111 – 5-port 10/100Mbps Industrial Switch.
852-112 – 8-port 10/100Mbps Industrial Switch.
Betriebstemperatur: 0°C~70°C
2. Verpackungsinhalt
• 1 852-111/852-112 Switch
• Hutschienenbefestigung
• Installationsanleitung
Hinweis: Hutschienenbefestigung ist am 852-112 schon befestigt.
3. Hardware Installation
Schritt 1: Switch aus der Verpackung entnehmen.
Schritt 2: Hutschienenbefestigung an 852-111 montieren (Fig.1)
Schritt 3: Anschluss der +18~30V DC Versorgungsspannung an
den Versorgungsklemmen (Fig. 2 und Fig. 3).
Anschluss der Funktionserde an die Erdungsschraube
Schritt 4: Anschluss der ETHERNET (RJ-45) Netzwerkkabel an den
ETHERNET Switch. An der LNK/ACT LED ist zu sehen,
wenn eine ETHERNET-Verbindung besteht.
4. Befestigung
Die Switches 852-111/852-112 können auf einer horizontalen
oder vertikalen Oberfläche positioniert werden. Es ist Schraub- oder
Hutschienenbefestigung möglich. (Fig. 4 und Fig. 5).
5. Schraubbefestigung
Hinweis: Bei 852-112 bitte die Hutschienenbefestigung vor der
Montage entfernen.
Befestigung ist horizontal und vertikal möglich.
Nutzen Sie die Schablone (Fig. 6) für die Markierungen.
6. RJ-45 Verdrahtung
Die RJ-45 ETHERNET Ports der Switches 852-111/852-112 unter-
stützen Auto-Negotiation und Auto MDI/MDI-X. Diese Funktionen
unterstützen Sie beim Anschluss unterschiedlicher Geräte und Kabel.
Bitte benutzen Sie für einwandfreie Funktion Kategorie 5 ETHERNET
Kabel und Stecker.
Quick Installation Guide
852-111 / 852-112
1. Overview
The 852-111 and 852-112 switches are compact, DIN-railed and
used to expand the ETHERNET to the factory floor or environments
with extreme conditions.
852-111 – 5-port 10/100Mbps Industrial Switch.
852-112 – 8-port 10/100Mbps Industrial Switch.
Operating temperature: 0°C~70°C
2. Package Checklist
Before installing the 852-111/852-112, verify that the package
contains the following items:
• 1 852-111/852-112 Switch
• DIN Rail Kit
• Quick Installation Guide
Note: DIN Rail Kit is already installed with 852-112
3. Hardware Installation Procedure
STEP 1: Remove the device from its packing.
STEP 2: Attach the DIN Rail Kit for the 852-111 (Fig.1)
STEP 3: Connect the +18~30V DC power to the power terminal
block (Fig. 2 and Fig. 3).
Connect the grounding screw to the ground wire.
STEP 4: Connect the ETHERNET (RJ-45) port to the networking
device. See the LNK/ACT LED to confirm that the
connection is established.
4. Location
The 852-111/852-112 can be placed on a desktop or
horizontal surface, wall-mounted and Din-Rail mounted (Fig. 4 and
Fig. 5).
5. Wall-Mounted Mask
Note: For 852-112 please remove DIN-rail kit before mounting.
The wall-mounted direction can be straight or horizontal.
Place Use 1:1 drawing mask (Fig. 6) for marking.
6. Cabling– RJ-45
The RJ-45 ports on the 852-111/852-112 support auto negotiation
and auto MDI/MDI-X. This feature eliminates the worry of using
specific cable types.
Please use Category 5 cable and Category 5 rated connectors.
Top ewVi
+18~30V DC
PWR
+
Power
(green)
Grounding
Screw
Front ewVi
100Mbps
(green)
Link/Active
(green)
1
2
3
4
5
100
LNK/ACT
100
100
L TNK/AC
L TNK/AC
1
2
3
4
5
6
7
8
+18~30V DC PWR
+
Front ewVi
100Mbps
(green)
100Mbps
(green) Link/Active
(green)
Link/Active
(green)
Power
(green)
Grounding
Screw
Bitte kontaktieren Sie bei Fragen den WAGO Kundenservice.
Should you have any further questions or concerns, please do not
hesitate to contact WAGO Customer Support.
WAGO Kontakttechnik GmbH & Co. KG
Postfach 28 80 D-32385 Minden
Hansastraße 27 D-32423 Minden
Telefon ++49 571/887-555
support@wago.com
info@wago.com
www.wago.com
Fig. 4: Hutschiene (DIN Rail) 852-111
Fig. 5: Hutschiene (DIN Rail) 852-112
Fig. 6: 1:1 drawing of 852-111 and 852-112
Click
Push
1
Click
2
Push
1
Click
2
Mounting holes for
INS-8005 and INS-8008
Mounting
bracket for
INS-8008

Termékspecifikációk

Márka: Wago
Kategória: Schakelaar
Modell: 852-112

Szüksége van segítségre?

Ha segítségre van szüksége Wago 852-112, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Schakelaar Wago

Wago

Wago 852-112 Útmutató

9 Szeptember 2024
Wago

Wago 852-1417 Útmutató

9 Szeptember 2024
Wago

Wago 852-1106 Útmutató

13 Augusztus 2024

Útmutatók Schakelaar

Legújabb útmutatók Schakelaar