Használati útmutató Vonyx RL25

Vonyx mikrofon RL25

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Vonyx RL25 (12 oldal) a mikrofon kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/12
RL25 Ringlamp Floorstand +
Ref. nr.: 188.223
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
GEBRAUCHSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
V1.0
2
ENGLISH
Congratulations to the purchase of this Vonyx product. Please read this manual thoroughly prior to using the product in order to
benet fully from all features.
Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions
to avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.
Keep the manual for future reference.
- Prior to using the product, please ask advice from a
specialist. When the product is switched on for the rst
time, me smell may occur. This is normal and will so
disappear after a while.
- The product contains voltage carrying parts. Therefore do
NOT open the housing.
- Do not place metal objects or pour liquids into the
product. This may cause electrical shock and
malfunction.
- Do not place the product near heat sources such as
radiators, etc. Do not place the product on a vibrating
surface. Do not cover the ventilation holes.
- The product is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the product from a mains outlet,
always pull the plug, never the lead.
- Do not plug or unplug the product with wet hands.
- If the plug and/or the mains lead are damaged, they
need to be replaced by a qualied technician.
- If the product is damaged to such an extent that internal
parts are visible, do NOT plug the product into a mains
outlet and DO NOT switch the unit on. Contact your
dealer. Do NOT connect the produ to a rheostat or ct
dimmer.
- To avoid re and shock hazard, do not expose the
product to rain and moisture.
- All repairs should be carried out by a qualied technician
only.
- During a thunderstorm or if the product will not be used
for a longer period of time, unplug it from the mains. The
rule is: Unplug it from the mains when not in use.
- If the product has not been used for a longer period of
time, condensation may occur. Let the unit reach room
temperature before you switch it on. Never use the
product humid rooms or outdoors. in
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- Do not repeatedly switch the produ on and o. This ct
shortens the life time.
- Keep the product out of the reach of children. Do not
leave the product unattended.
- Do not force the controls.
- If the product has fallen, always have it checked by a
qualied technician before you switch the product on
again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the product with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the product o prior to unplugging it from the
mains and/or other equipment. Unplug all leads and
cables prior to moving the product.
- Keep the original packing material so that you can
transport the product in safe conditions.
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that p2-he should
read and adhere to.
The product has been certied CE. It is prohibited to make any changes to the product. They would invalidate the CE certicate
and their guarantee!
NOTE: To make sure that the product will function normally, it must be used in rooms with a temperature between 5°C/ °41 F and
35°C/95°F .
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.
Specications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also
invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the
warnings contained in this manual. Vonyx cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations and warnings. This is also applicable to all damages in whatever form.
3
UNPACKING INSTRUCTION
CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and packing.
If the device has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched o until it has reached room temperature.
S TING ET UP
1. Adjust the tripod to the desired height by extending the tubes. When the tripod is set to the desired height, rmly tighten
the clamps.
2. Attach phone holders to the phone stand by tightening the screws, then xate the phone stand on top of the trip . od
Finally, xate the ring lamp on top of the phone stand by tightening the mounting screw. fi
3. Attach the gooseneck phone hol to the ring lamp This phone holder allows you to lm/photograph from a variety of der .
angles.
4. Insert the microphone stand into the microphone clamp before attaching the clamp to the tripod tube.
Attach the tray, by xing the tray clamp to the tripod tube and tighten the clamp screw.
CONTROLS
1. ON/OFF
Press this button to turn on/o the ring lamp lighting.
2. COLOR TEMPERATURE
Switch color temperatures by pressing this button. Three
options are available: warm, natural and cool. Warm is set
as default temperature.
3. BRIGHTNESS
Press the + or - buttons to change the brightness of the “ ” “ “
emitted light. 10 increments of brightness are available.

Termékspecifikációk

Márka: Vonyx
Kategória: mikrofon
Modell: RL25

Szüksége van segítségre?

Ha segítségre van szüksége Vonyx RL25, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók mikrofon Vonyx

Vonyx

Vonyx WAT200 Útmutató

6 Január 2025
Vonyx

Vonyx CM300W Útmutató

9 December 2024
Vonyx

Vonyx CMC200 Útmutató

30 Szeptember 2024
Vonyx

Vonyx VX1800S Útmutató

28 Szeptember 2024
Vonyx

Vonyx WM552B Útmutató

4 Szeptember 2024
Vonyx

Vonyx CMS300S Útmutató

3 Szeptember 2024
Vonyx

Vonyx STWM712 Útmutató

28 Augusztus 2024
Vonyx

Vonyx RL25 Útmutató

26 Augusztus 2024
Vonyx

Vonyx CM320 Útmutató

22 Augusztus 2024
Vonyx

Vonyx 179.206 WM73 Útmutató

13 Augusztus 2024

Útmutatók mikrofon

Legújabb útmutatók mikrofon

Godox

Godox Cube-C Útmutató

7 Január 2025
Audibax

Audibax AWM 401 TD Útmutató

6 Január 2025
Audibax

Audibax Sidney 1250 A Útmutató

6 Január 2025
Audibax

Audibax AWM 201 Útmutató

6 Január 2025
Audibax

Audibax AWM 401 Útmutató

6 Január 2025
Audibax

Audibax AWM 403 Útmutató

6 Január 2025
Audibax

Audibax Sidney Conference 1000 Útmutató

6 Január 2025
Audibax

Audibax Sidney 1250 B Útmutató

6 Január 2025
Audibax

Audibax Free Head UHF Útmutató

6 Január 2025
Audibax

Audibax Berlin 1800 Útmutató

6 Január 2025