Használati útmutató Vogel's PVA 4216

Vogel's hangszóró PVA 4216

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Vogel's PVA 4216 (4 oldal) a hangszóró kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/4
D, Fr, NL, Es, It : www.vogels.com/professional
Manual PVA 4206, PVA 4210, PVA 4216
video conferencing loudspeaker Version 1.0
PVA 4206, PVA 4210, PVA 4216 video conferencing loudspeaker with RS 232/485
communication
The PVA 4206, PVA 4210, PVA 4216 loudspeaker is especially designed for video
conferencing. The built in amplifier has a RS 232/485 communication feature which makes
remote control and operation possible. This can be in combination with other video
conferencing equipment.
Made in The Netherlands
Vogel’s Products BV
NL 5628DB Eindhoven
www. vogels.com
Vogel’s Holding BV 2012 © all rights reserved.
Subject to printing errors and technical amendments .
Content
-1x PVA 4206 PVA 4210 PVA 4216 loudspeakerOR OR
- 1x manual
- 1x 18V – 2,22A power supply unit
- 1x Stereo audio cable (cinch – jack3.5)
- 4x Anti skid pads
Connecting PVA 4206, PVA 4210, PVA 4216
Only use the supplied power supply.
First connect the loudspeaker to the audio source with the supplied audio cable.
Then connect the 18V plug from the power supply.
Only then plug the power supply into a mains source.
M a n u a l o p e r a t i o n :
Switching on and volume up: turn volume knob right, clockwise.
Switching off and volume down: turn volume knob left, counter clockwise.
The amplifier will not switch on immediately after turning the volume knob, it will wait till the green LED
has flashed once. This is part of the power saving function.
When the amplifier is switched on the green and red LED will flash once. After that the green LED will
stay on.
When the amplifier is switched off, the green LED will flash every 3-4 seconds as stand-by indcation.
This is also the RS232/485 monitor moment.
R S 2 3 2 / R S 4 8 5 o p e r a t i o n :
When the amplifier is switched on (green LED on), it will scan the RS232 and RS485 ports on activity.
When the amplifier detects activity on one of the ports it will switch to this port. The other port will be
ignorded as long as power is on.
Scanning of the ports will be resumed only when the power is switched off and on again.
When the amplifier is RS232 / RS485 operated, the position of the volume knob will be ignored.
When the amplifier is switched off via the RS232 / RS485 ports is will scan these ports every 3-4
seconds on new activities.
RS232 / RS485 Protocol:
The amplifier is operated by readable ascii commands.
These commands can, as example, be send and viewed by a terminal emulation program.
Baudrate: 9600
8 Bits (8n1)
The operation is based on the Basic Control Structure (BCS) Protocol of AMX/Crestron/Extron/Neets.
18V DC power in
Supporting BCS commands:
BCS commands are used as much as possible, however for some functions there exist no BCS codes,
for these functions dedicated * commandos are used.
Command Command Response Protocol
Volume control COVA^^^T COVA^^^T BCS
Volume status request SOVAT SOVAT(^^^) BCS
Switch off COVMT COVMT BCS
Switch on COVUT COVUT BCS
Status request SOST SOST B15
Put amplifier in potentiometer
mode
COPT COPT B15
^^^ Volume in dB (value -100 tot 0) 0 is maximum amplification.
At -100 the amplifier will be switched in stand-by.
When no value is set, value 0 will be used (attention this is max. volume)
Status replies:
Answer Meaning
Ok Everythinh working okay
E Amplifier IC is giving an error signal.
W Amplifier IC is giving a Warning signal.
EW Amplifier IC is giving both an Error and a Warning
signal.
Connections data connector:
Pin Number Pin 1 (Left) Pin2 Pin3 Pin4 Pin5 (Right)
Amplifier
function
GND RS232 TX RS232 RX RS485 +
Non inverting
RS485 –
Inverting
Function Host
(PC)
GND Receive data Tansmit Data
SubD9
RS232
Pin 5 Pin 2 Pin 3 NVT NVT
SubD9
RS485
Pin 5 NVT NVT Pin 1 Pin 2
RS232 SubD 9 pinout (pin connector male/front view):

Termékspecifikációk

Márka: Vogel's
Kategória: hangszóró
Modell: PVA 4216

Szüksége van segítségre?

Ha segítségre van szüksége Vogel's PVA 4216, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók hangszóró Vogel's

Vogel's

Vogel's PVA 4316 Útmutató

12 Szeptember 2024
Vogel's

Vogel's PVA 4216 Útmutató

8 Július 2024
Vogel's

Vogel's PFA 9111 Útmutató

18 Június 2024

Útmutatók hangszóró

Legújabb útmutatók hangszóró

JBL

JBL Control 426LP Útmutató

9 Április 2025
Crestron

Crestron SAROS IC8T Útmutató

8 Április 2025
LD Systems

LD Systems STINGER G3 TMB Útmutató

8 Április 2025
JBL

JBL Conceal C83 Útmutató

8 Április 2025
Crestron

Crestron SAROS ICE4T Útmutató

7 Április 2025
Crestron

Crestron SAROS ICI6T Útmutató

7 Április 2025
Focal

Focal K2 Power M FRAK Útmutató

5 Április 2025
Match

Match UP C42BMW-FRT.3 Útmutató

3 Április 2025
Turbosound

Turbosound PQ12-SB Útmutató

3 Április 2025
Trust

Trust Tytan GXT 658 Útmutató

3 Április 2025